• 제목/요약/키워드: maintenance standard materials

검색결과 115건 처리시간 0.034초

순환굵은골재 치환과 하이브리드섬유 혼입에 따른 철근콘크리트 외부 보-기둥 접합부의 내진성능 평가 및 개선 (Improvement and Seismic Performance Evaluation of RC Exterior Beam-Column Joints Using Recycled Coarse Aggregate with Hybrid Fiber)

  • 하재훈;하기주;신종학
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권2호
    • /
    • pp.160-169
    • /
    • 2015
  • 이 연구에서는 순환굵은골재와 고로슬래그미분말을 치환한 콘크리트를 철근콘크리트 외부 보-기둥 접합부의 위험단면영역에 하이브리드 섬유 (PVA섬유+강섬유)를 적용한 외부 보-기둥 접합부 실험체를 7개 제작하여 실험을 수행하여 내진성능을 평가하였다. 이 연구의 실험결과를 근거로 다음과 같은 결론을 얻었다. 철근콘크리트 보-기둥 접합부의 접합부 영역에 하이브리드섬유를 보강한 결과 초기 재하시 접합부 영역의 균열억제 효과와 재하 전 과정을 통하여 하이브리드섬유의 가교역할로 인하여 균열억제 효과가 커서 안정적인 파괴형태 및 내력향상 효과를 나타내었다. 철근콘크리트 보-기둥 접합부영역에 하이브리드섬유를 보강한 실험체 BCJGPSR 시리즈는 표준실험체 BCJS와 비교하여 최대내력은 1.01~1.04배 증가하였다. 그리고 에너지 소산능력은 1.06~1.29배 증가하였다. 또한 하이브리드섬유 (강섬유+PVA섬유)를 보강한 실험체 $BSJGPSR_1$은 최대강도를 확보한 변위연성 9에서 실험체 BCJS, BCJP, BCJGPR 시리즈 보다 에너지 소산능력이 1.33~1.65배 증가한 것으로 나타났다.

흡수성 Biofilter 를 이용한 농촌 소규모 오수처리 시설의 성능 (Performance for a small on-site wastewater treatment system using the absorbent biofilter in rural areas)

  • 권순국;윤춘경
    • 한국환경농학회지
    • /
    • 제18권4호
    • /
    • pp.310-315
    • /
    • 1999
  • 본 연구에서는 생물막법의 일종인 흡수성 Biofilter 시스템(ABS)을 설치하여 14개월의 실험기간 동안 건국대 농생대 구내의 염기성 부패조로부터 유입수를 3가지 수리부하율로 처리하여 시험하였다. 모니터링 결과에 의하면 ABS는 평균농도 $BOD_5=6.2mg/l$, TSS=4.4mg/l 이라는 아주 낮은 유기성 유출수를 연속적으로 발생시킬 수 있음이 확인되었다. 이러한 저농도 유출수는 현재 우리나라 오분법의 특정지구(상수원 보호구역)에 대한 방류수 기준($BOD_5=10mg/l$, TSS=10mg/l)에도 훨씬 못 미치는 양호한 농도로서 ABS의 우수한 유기성오수 처리성능이 입증되었다. 특히 유출수내의 TSS 농도가 지극히 낮아서 슬러지의 발생이 거의 없으므로 침전조를 생략할 수 있어 설치비용이 저렴해지고, 유지관리가 단순한 장점을 지니고 있음을 알 수 있었다. 그러나 ABS시설이 농촌에 널리 보급되어 실용적인 시스템이 되기 위해서는 앞으로 T - N과 T- P의 처리효율 향상 방안, 겨울철에 대한 Biofilter탱크내 임계온도 유지문제, 광역모니터링 및 신속보수 유지관리체계 확립에 대한 계속적인 연구가 필요하다. 이러한 문제점만 어느정도 해결된다면 ABS는 우리나라 농촌의 소규모 현장 오수처리시설로서 앞으로 미래가 밝은 차세대형 시스템이 될 것으로 확신한다.

  • PDF

서울 시내 일부 주차장의 공기중 섬유농도에 영향을 미치는 인자 분석 (The Factor Analysis of Airborn Fiber Concentrations at Parking Lots in Seoul)

  • 문지영;김현욱
    • 한국산업보건학회지
    • /
    • 제4권2호
    • /
    • pp.157-167
    • /
    • 1994
  • This study was conducted to analyze the relationship between the types of fiber and its content and the levels of airborne fiber concentrations at eight parking lots where sprayed insulation material was found on the walls and ceilings. Also this study was designed to find the relationship between the levels of airborne fiber concentrations and such variables as air current, humidity, total exhaust volume, surface condition of insulation material and building age. The results obtained were as follows : 1. No significant correlation was found between the levels of airborne tiber concentration and the building age, air current, humidity, total exhaust volume, space and the number of traffics. 2. A significant correlation was found between the levels of airborne fiber concentration and the MMMF content of the insulation material(r=0.7594). However, no significant correlation was found between the levels of airborne fiber concentration and total fiber content of insulation material. 3. The differences of the airborne fiber concentrations among Cateogory 1, 2 and 3 classified by the degrees of surface insulation material maintenance were very significant. 4. Two bulk samples contained 30% crodicolite and 1% anthophylite. The MMMFs, in all parking lots, included mineral wool, cellulose fiber, trace cellulose fiber, trace tiber glass and vermiculite. 5. The mean value and the range of airborne fiber concentrations at 8 parking lots were $0.0239{\pm}0.0095f/cc$ and 0.0054-0.0447 f/cc, respectively. The fiber concentrations of 35 out of 38 samples(92%) were over 0.01 f/cc which is the Environment Administration's recommended asbestos level for the underground space. This study suggests that most of building insulation materials used in Korea, contain MMMF and sometimes asbestos. Currently, MMMF pollution levels may exceed the Environment Administration's recommended level for underground space. It has been found that airborne fiber concentrations increased significantly with MMMF content and with the maintenance condition of surface material. Therefore, it is recommended that a proper management technique should be developed and immediately implemented since the conditions of surface material will be gradually deteriorated due to building age and usage. Since health hazards of the MMMF, similar to those of asbestos, are being gradually acknowledged, a proper management technique which is applicable to control total airborne fiber concentrations, both asbestos and MMMF, be developed and an acceptable indoor air standard be promulgated as early as possible.

  • PDF

119구급대원의 감염관리에 대한 인지도와 수행도 관계 연구 (A Study on the level of Recognition and Practices of 119 Emergency Medical Technician about Infection Control)

  • 윤형완;정지연
    • 한국응급구조학회지
    • /
    • 제12권3호
    • /
    • pp.99-113
    • /
    • 2008
  • In order to protect Rescue 119 workers exposed on the spot from potential infection, this study identified their awareness and practices of infection control so that it could help preventing them from infection and also provide basic materials necessary for pre-hospital infection control. This study applied questionnaire survey to total 215 Rescue 119 workers at fire stations in Jeonbuk province, Jeonnam province and Gwangju city from July 14 to Sept. 14, 2006 for the benefit of data collection. The questionnaire about possible associations between awareness and practices of infection control consisted of total 46 times across 6 categories such as washing hands during emergency activities ; fluid therapy and injection ; respirator maintenance; individual hygienics ; disinfectant supplies and equipments maintenance ; and control of infectious wastes. And collected data were processed using SPSS statistic program to analyze frequency and percentage, mean and standard deviation, Pearson's correlation coefficient, t-test and one-way ANOVA. As a result, this study came to the following conclusions : In terms of awareness about infection control, our respondents showed highest awareness about infectious waste control, and also showed highest level of practices in washing hands during emergency activities. Throughout all domains, awareness means were higher than practice means. In particular, infectious waste control was the domain of significant differences between awareness and practices. In terms of associations between awareness and individual characteristics, it was found that female rescue worker group and hospital/general hospital career group (before joining the Rescue 119) showed significantly higher awareness on statistic level. In regard to associations between individual characteristics and practices, it was found that female rescue worker group showed higher level of practices than male group on statistic level. This study also analyzed correlations between rescue workers' awareness and practice of infection control. As a result, it was found that the higher awareness was in correlations with the higher practices across all 6 domains including washing hands. In addition, the higher awareness of a questionnaire item was in significantly positive correlations with the higher practice of other items. However, our respondents showed high awareness about anti-infection, but low practices in reality. This indicates necessity of devising possible solutions to improve the practices as much as awareness. Especially, it was noted that major reasons for insufficient practices of infection control guideline come from unhabituated practices and lack of supports for infection-preventing supplies and protective device (mask, etc). Hence, it is necessary to provide more infection-preventing supplies for local rescue workers sufficiently, in parallel with steady habituation of infection control. Furthermore, it is required to manage and study infection control policies even at pre-hospital step in efforts for effective infection control, education and activities.

  • PDF

A FUNDAMENTAL STUDY TO DEVELOP STANDARD TECHNOLOGY CRITERIA FOR IT-CONSTRUCTION FUSION TECHNOLOGIES, TO BE APPLIED TO A U-CITY

  • Kyoon-Tai Kim;Jae-Goo Han;Chang-Han Kim
    • 국제학술발표논문집
    • /
    • The 3th International Conference on Construction Engineering and Project Management
    • /
    • pp.1352-1358
    • /
    • 2009
  • As the demand for a convergence between construction technologies and IT is on the rise, as seen in the visualization of U-City construction, studies on the ways in which IT in should be utilized in the building and construction field have been continuously and actively performed. However, there has been almost no development of standardized technology criteria relating to the life cycle of a building (planning, design, construction, and maintenance). That is, there are almost no examples of efforts made to combine construction technology and IT in a fundamental way, considering the environment, the facility, its spatial characteristics, engineering, materials, and structure, aspects that are commonly required not only for interior spaces but also for exterior construction of U-City. Despite the fact that a state-of-the-art infrastructure has been built, and the competency of users with the cutting-edge technology, composite studies on technologies, facilities, services and spaces are still lacking, and basic research on the composite operation method including compatibility and linkage between facilities and services within a U-City has been insufficient as well. It is generally known that by fusing IT with construction technologies, the total period of construction taken can be reduced and construction expenses can be curtailed, while construction quality can be improved. For this reason, it is vital to prepare a standardized base to connect cutting-edge IT with the construction technologies. In preparing such a base, the most urgent issue is to develop standardized technology criteria. The ultimate objective of this research is to establish the technological criteria system required to apply construction-IT fused technologies to U-Cities, and to develop the technological criteria for the design, construction and maintenance of the U-Cities. This paper, whose objective is to establish development strategies for construction-IT fused technologies by way of analyzing the criteria for conventional construction projects, the necessity of criteria for construction-IT fused technologies, and the current status of U-Cities' development, is the underlying research for this purpose. The strategies established are expected to be utilized in establishing the system of criteria for construction-IT fused technologies, and to contribute to a knowledge base in the construction-IT field. In addition, based on the strategies established, criteria for construction-IT fused technologies, such as design criteria and construction standards, will be developed, and by applying these criteria and standards, the ultimate objectives of U-Cities, which are the enhancement of urban competitiveness and the satisfaction of residents, will be attained

  • PDF

콘크리트 구조물의 유지보수에 사용되는 누수보수재료의 인공 균열을 이용한 온도 안정성 시험평가 (Thermal Stability Test Evaluation of Applying the Artificial-Crack of Water-Leakage Repair Materials Used in the Maintenance of Concrete Structure)

  • 김수연;김병일;오상근
    • 한국건설순환자원학회논문집
    • /
    • 제4권3호
    • /
    • pp.322-329
    • /
    • 2016
  • 본 연구에서는 콘크리트 구조물의 누수 균열 보수에 사용되는 재료에 대한 품질관리 방안으로 선행연구에 이어 후속 연구로 "온도 안정성 시험방법"을 제안하였다. 제안된 시험방법을 이용하여 5계열의 15 종류, 총 45개의 시험편을 대상으로 성능 평가한 결과 온도 안정성 시험에서는 저온($-20^{\circ}C$), 고온($60^{\circ}C$)의 다소 가혹 조건의 온도에서 얼었다 녹았다가 반복되면서 흘러내림, 체적변화, 색의 변화 등 다양한 재료 변화가 나타났고, 이에 대한 누수 여부 판별을 위하여 투수 시험한 결과 약 29%인 13개의 시료는 누수 되지 않았고, 약 71%인 32개 시료에서 누수되는 결과가 확인되었다. 이러한 결과는 현재 콘크리트 구조물의 유지보수에 사용되는 누수보수재료에 대한 온도 환경이 고려된 품질관리 기준 설정에 대한 필요성을 충분히 인식 할 수 있었으며, 콘크리트 구조물의 장기 내구성 확보를 위한 본 시험 방법인 "온도 안정성 시험방법"에 대한 표준적인 시험방법으로서의 활용 가능성을 확인하였다.

부산지역 레미콘 플랜트 및 원재료 현황 (Status of Ready-Mixed Concrete Plants and Raw Materials in Pusan)

  • 유승엽;구자술;이양수;문형재;김정진;박순전
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
    • /
    • pp.641-644
    • /
    • 2008
  • 본 고에서는 부산 제2롯데월드 현장에 공급이 가능한 부산지역의 레미콘사를 선정하여 플랜트 및 원재료의 현황에 대하여 조사한 것으로 그 결과를 요약하면 다음과 같다. 조사한 레미콘 공장은 대부분 횡치형으로, 210m$^3$/hr용량의 Twin shaft 믹서를 주로 사용하고 있고, 결합재 및 혼화제 사일로보유대수는 각각의 공장마다 차이를 보이나, 원재료 종류별로 구분하여 사용하고 있었다. 결합재는 1종 보통 포틀랜드 시멘트, 플라이 애쉬 2종, 고로슬래그 미분말 3종을 주로 사용하고 있는데, 양호한 레미콘 품질관리를 위해 각각의 재료별 동일 공급사를 지정하여 사용하고, 품질 모니터링 기준을 마련하여 관리해야 할 것으로 판단된다. 굵은 골재는 다양한 산지의 부순 골재를 사용하고 있는데, 산지에 따른 품질차를 해결하기 위해 Y산지 골재를 사용하도록 하였고, 잔골재는 부순 잔골재, 세척사, 강사를 주로 사용하고 있는데, 혼합방법에 따라 실험을 실시하여 안정한 품질로 지속적인 공급이 가능한 잔골재를 선택하는 것으로 하였다. 혼화제는 배합 및 현장별로 별도 관리하고 있는데, 본연구에서는 2시간 유지성능 및 15시간 10MPa를 발현을 만족시킬 수 있는 폴리카르본산계 고성능감수제를 개발하여 사용하는 것으로 하였다.

  • PDF

식재료 아웃소싱이 경제적 주방에 미치는 영향에 관한 연구 - 특1급호텔 양식조리를 중심으로 - (Study on economic effects of outsourcing of food materials on the hotel kitchen - Focus on cooking Western food in the first class hotel -)

  • 성태종
    • 한국관광식음료학회지:관광식음료경영연구
    • /
    • 제13권2호
    • /
    • pp.45-69
    • /
    • 2002
  • This study is designed to examine feasibility and limitation of outsourcing in cooking Western food in a hotel, to interpret importance of outsourcing(eg. outside order, outside procurement, outside supply) in a broad sense in order to reinforce the core capacity in the cooking department, and to know whether the cooking human power is efficiently used and how much the chefs recognize outsourcing of food materials. As many companies conduct restructuring to cut down its size, the reduction of human power led the Western food cooking in the hotel to lower core capacities, lower quality, and lower efficiency. In addition, the sagging morale of chefs undermined creativity. To change from the traditional kitchen to an economic kitchen needs to look into importance of outsourcing, cognitive attitude of chefs, relation with outside suppliers. Here suggests performance of positive changes in the structure The study examined feasibility and limitation of outsourcing in the hotel kitchen as well as chefs' cognitive attitude toward outsourcing of food materials to reinforce core capabilities of the hotel kitchen. 1. Companies of outsourcing are selected according to variability of price conditions, flexibility of contract conditions, popularity of the outsourcing company, and reputation of the outsourcing company. 2. The importance of outsourcing in the Western food cooking is divided into 4 factors such as standard of selecting outsourcing companies, policies of cooking manu, quality of cooking, and quantity of cooking. 3. The most feasible section in outsourcing of food materials is a process of kneading flour for bread, which shows that many Western-food chefs expect to put higher possibility of outsourcing on the kneading. In other words, when it comes to confectionery and bakery, there are many outside expert processing companies supplying high quality products. In the order of outsourcing feasibility, sauce is followed by processed vegetable, garnish of main dish, and soup. The least feasible section in outsourcing of food materials is appetize. Appetize includes a concept of a improvised dish and needs speed. Due to its color, freshness, and sensibility of taste, the appetize plays a key role in the Western food cooking. 4. When outsourcing is taken in place, the highest risk is to lower the inner cooking skills. Therefore chefs in charge of the Western food sequently recognize both internal problems including storage of cooking skills, unstability of layoffs, and loss of cooperation between departments, and external problems including inferior goods, difficulty of differentiating manu, delay of delivery, and expiration date. It shows that most of the Western food chefs consider risks of the internal problems at first. 5. A effective outsourcing needs appropriate selection of outsourcing companies, maintenance of credibility, active communication, check and management of hygiene. However regardless of their position or career, chefs in charge of the Western food have the same cognitive attitude toward selecting successful outsourcing companies after the outsourcing system is enforced. The core of cooking, or a final stage in the full process of so-called artistic cooking, should be treated with insourcing. Reduction of several cooking processes resulted in shortened cooking time, increased efficiency, faster cooking, cutting the waiting-lines, and finally more room for customers. The outsourcing system can reduce or eliminate the following processes in cooking: buying various food materials, checking, storing, preparing, and processing. Especially in the Western food cooking department of a hotel, the outsourcing system should be enforced to make an economic kitchen and to efficiently manage it. Wow it's time to change from the traditional kitchen to an economic kitchen in the hotel cooking department. For that, the cooking department should become a small but strong organization by outsourcing except its core work.

  • PDF

물 환경의 방사성 물질 관리 방안과 분석법에 관한 연구 (II) 일본의 물 환경 방사성물질 관리 체계에 대한 고찰 (Study on Radioactive Material Management Plan and Environmental Analysis of Water (II) Study of Management System in Water Environment of Japan)

  • 한성규;김정민
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제38권3호
    • /
    • pp.305-313
    • /
    • 2015
  • 2011년 일본 후쿠시마 원전 사고 이후 국내외에서 관련 연구 및 관리체제 정비가 이루어지고 있다. 국내에서도 물의 방사능 오염에 대한 우려가 높아졌으며, 이에 따라 환경부를 중심으로 물 속 방사성 물질 관리체제 정비가 이루어지고 있다. 본 연구에서는 원전 사고의 피해 당사국이며 인접국가인 일본의 관리체제 정비 현황을 분석하였다. 분석한 결과 일본에서는 법제 정비 후 문부과학성이 방사능 측정의 이론적인 내용을 규정하고, 환경성은 실제 공공수역 및 지하수의 수질 오염 상황을 감시하며, 지방자치단체 등 관련된 일선 기관에서 물 환경의 방사능 오염 상황을 모니터링하고 있다. 지역별로 보면 지방측정소들은 전 국토 대상의 조사를 분담하며, 원자력 시설 주변에서 별도의 모니터링을 하고 있으며, 원전 사고 이후 후쿠시마 인근 지역에 대한 모니터링이 추가로 운영 중이다. 기준치 중 음료수 및 수도수의 관리 목표치는 10 Bq/kg이며, 후쿠시마 주변 공공수역과 지하수는 1 Bq/L로 되어 있다. 측정 주기는 매 시간에서 연 1회까지 다양하며 검사에 따라 정기적 또는 부정기적으로 실시되고 있다. 주된 측정 항목에는 공간선량률, 전${\alpha}$, 전${\beta}$, ${\gamma}$핵종, Cs-134, Cs-137, Sr-89, Sr-90, I-131 등이 있다. 이에 비해 우리나라는 원자력시설 주변과 먹는 물에 대한 규제기준은 정비되어 있는 반면, 일반적인 공공수역에 대한 관리는 2014년에 시작되었다. 따라서 향후 WHO 등의 가이드라인을 참고하여 국내 체계를 보완할 것으로 예상된다. 일본의 관리 체계는 우리나라의 일반적인 공공수역 방사성물질 기준을 확립할 때 참고가 될 수 있다고 사료된다.

비가열 냉동떡의 제조공정에 대한 미생물 오염도 평가 (Evaluation of Microbial Contamination in the Manufacturing Process of Non-Heated Frozen Rice Cakes)

  • 윤용식;양은인;김영수
    • 한국식품위생안전성학회지
    • /
    • 제37권6호
    • /
    • pp.400-410
    • /
    • 2022
  • 본 연구에서는 비가열 떡 제조업체 3곳을 대상으로 원재료, 제조설비 및 계절별 제조공정에 대한 미생물 오염도를 분석하였고, 여름철 불림 시간에 따른 미생물 오염도 및 불림 수 온도 조절을 통한 미생물 저감 효과를 확인하고자 하였다. 3업체의 원재료 일반세균수는 2.69-5.08 log CFU/g 범위로 검출되었으나 제조공정 중 불림공정에서 미생물 오염도가 급격히 증가함을 확인하였다. 계절에 따른 제조공정별 미생물 오염도 분석결과, 여름철 불림공정에서 일반세균 및 대장균군이 7.01 및 3.96 log CFU/g로 다른 계절에 비해 유의적으로 높게 나타났고, 이후 공정에서도 높은 오염도를 유지하여 냉동공정에서 일반세균이 6.24 log CFU/g로 법적인 기준을 초과하여 검출되었다. 여름철 불림 초기 수온은 19.1℃에서 불림 12시간 후 26.8℃까지 상승하였고, 불림시간에(3, 6, 9, 12 h) 따른 제조공정별 미생물 오염도 분석결과, 불림시간이 길어질수록 미생물 오염도가 유의적으로 높게 나타났고, 불림 9시간 이후부터 냉동공정의 일반세균 수치가 냉동식품의 법적인 기준을 초과하여 검출되었다. 여름철 불림 수의 온도 상승을 억제하기 위하여 얼음팩을 이용하여 불림 수온을 조절한 결과, 불림 12시간까지 20.1℃로 유지되어 조절 전보다 약 7℃가량 낮게 나타났다. 이에 따른 제조공정별 미생물 오염도 분석결과, 3업체의 불림 12시간 이후 냉동공정 일반세균 평균값이 4.42 log CFU/g로 조절 전보다 1.77 log CFU/g 감소한 것으로 확인되었다. 이상의 결과로 볼 때, 안전한 비가열 냉동떡 생산을 위해서는 업체에 맞는 불림시간 및 불림 수 온도조절 등의 선행요건 관리기준 설정이 필요하며, 이러한 선행요건 관리기준의 적용으로 비가열 냉동떡 제조 HACCP system의 안전성이 확립될 수 있을 것으로 판단되었다.