• 한국주거학회논문집
• /
• 제15권1호
• /
• pp.75-84
• /
• 2004

As the advent of an aging society, housing for the elderly has been of greater concern. Since the majority of the elderly prefers to live in their own familiar houses rather than moving to new ones, this study is concerned with the ways of the effective use and maintenance of exiting houses from the viewpoint of their independent living. The data was analyzed with frequency, percentage, mean, correlation, and multiple regression using the SPSS 10.0 for Windows. The findings from the study are: The general satisfaction rate of Interior Design Affordance(IDA) was-evaluated about the average. Among the items of IDA, behavioral facilitation was found most satisfactory, and perceptual maintenance, physilogical maintenance, and social facilitation were followed in satisfaction level. Although there had been many elements of serious safety dangers, no home modification was made in the elderly households who live alone or/with spouse.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.221-227
• /
• 2005

This study has suggested the base data for decision of maintenance ranking and estimation of maintenance effect in the maintenance project of sewers as based on investigation of the defective rate in the sewer through Infiltration/Inflow(I/I) and CCTV analysis. It also analyzed the correlation between I/I and defective rate of sewer. As the result of this study, (1) Defective items of sewer was found out one item each 12.97m with an average. (2) By regression analysis, I/I has high correlation with defective rate of sewer like that $R^2$ is 0.7806. (3) The first thing in the item with bad influence on the I/I was joint badness and secondary was cross connection.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.376-381
• /
• 2011

In Korea Water Resources Corporation (K-Water) has seen four problems rising in four aspects of property management of approximately 1,300 buildings scattered through put to country. To solve these, ground data for repair and replacement works to be conducted for prevention will be prepared and building maintenance system (hereinafter referred to as PBMS) intended to record related repair and replacement work histories and calculate LCC of the related these items will be developed. PBMS, a web-based system, will be developed for users' convenience and data monitoring in real time. To sum up, PBMS are expected to maximize efficiency in four aspects including the establishment of repair and replacement work plans for prevention, history management, DB for predicting future work to be occurred and enable the determination of priorities by being developing into facility condition assessment systems through the results of analysis of repair and replacement histories and LCC.

• 한국습지학회지
• /
• 제16권4호
• /
• pp.403-411
• /
• 2014

본 논문은 농업용저수지의 수문학적 안전성을 평가하기 위하여 평가 항목 및 지표를 설정하여 제시하였으며, 이를 위하여 전문가 집단을 대상으로 AHP 기법을 통해 평가 항목의 계층화를 통한 상대적인 중요도를 파악하였다. 연구 결과 다음과 같은 결론을 얻었다. 첫째 평가항목의 계층구조는 2계층(상위, 하위)으로 구분하여 상위 평가항목은 6개(제체의 여유고, 여수로의 방류능력, 유지관리 상태, 하류하천 제방의 여유고, 잠재 홍수피해, 홍수량 산정 인자)를 선정하였고, 하위 평가항목 11개를 선정하였다. 둘째, 계층적의사결정법에 의하여 각 항목간 쌍대비교 설문과 일관성 검증을 통해 도출된 6개 상위 평가항목의 중요도는 유지관리 상태(상태평가 등급), 제체(비월류부)의 여유고, 여수로의 방류능력, 잠재 홍수피해, 홍수량 산정 인자, 하류하천 제방의 여유고 순으로 나타났다. 유지관리 상태(안전점검 상태평가 등급)가 농업용저수지 수문학적 안전성에 지배적인 영향을 미치고 있는 것으로 나타났다. 마지막으로 농업용저수지의 수문학적 안전성 확보를 위해서는 단기적 방안으로 신속한 개선이 가능한 안전점검 상태평가 등급의 개선이 유용하며, 장기적으로 여수로 방류능력과 제체의 여유고를 확보하는 방안이 필요할 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.1-4
• /
• 2005

This study is to examine adhesion the characteristics of self adhesive asphalt to minimize of the construction periods and the environmental problems through the performance estimation of materials to reduce waterproof problem and the long durability maintenance of building structures. This study tested the estimation items of self rubberized adhesive asphalt to examine the sheet discovered the most important problem in the construction site and the connection stability in the sheet joint. Besides, this study examined the material characteristics such as tension property, tear property, temperature dependence, heat resistance, adhesion stability and so on. Test results of the separative items satisfied in the reference figure of connection stability and adhesion stability which could confirm adhesion performances and other items also satisfied in the reference.

• International Journal of Reliability and Applications
• /
• 제3권4호
• /
• pp.185-198
• /
• 2002

In the traditional life testing model, it is assumed that a certain number of identical items are tested under identical condition. This is due to statistical rather than practical considerations. The proportional hazards model can be used to develop a realistic approach to determine the performance of an item. That is also capable of modeling the failure rates of accelerated life testing when the covariates are applied stresses. The proportional hazards model is typically applied for a group of items to assess the importance of factors that may influence the reliability of an item. In this paper we considered the interarrival times of an item rather than the time to first failure for grouped items and provided the availability estimation for the determination of maintenance policy and overhaul time. In order to demonstrate the proposed approach, an example is presented.

• 대한간호학회지
• /
• 제28권3호
• /
• pp.602-615
• /
• 1998

The purpose of this descriptive study was to identify the homecare needs of the discharged patient with cancer as perceived by nurses caring hospitalized cancer patients. At two hospitals in Gyeongnam, 74 nurses responded to an open-ended questionnaire consisting of four need categories : 1) educational & informational need, 2) physical need, 3) emotional need, 4) social need. Respondents were asked to list above ten needs of cancer patient in each category. Two researchers analyzed the data by content analysis method. The findings are summarized as follows : 1) A total of 1,417 need items were generated by nurses. The largest number of needs were in the educational & informational need category(475 items, 36.3%). Physical(414 items, 31.6%), emotional (237 items, 18.1%) need were the second, third largest, and social(184 items, 14.0%) need made up the smallest category. 2) In the educational & informational need category, there were seven subcategories of prognosis, diet & exercise, medication & pain, wound care, folk remedy, personal hygiene, comfort. The need items related to prognosis of cancer accounted for almost a half(48.2%) of the total. 3) In the physical need category, there were ten subcategories of personal hygiene, skin & tissue, nutrition, side effect on treatment, exercise, pain, elimination, equipment, comfort & safety, others. The largest number of needs were in subcategory of the personal hygiene(82 items, 19.8%). 4) In the emotional need category, there were four subcategories of emotional support related to disease, emotional support related to routine life, spiritual support, maintenance of relationship with nurse & doctor. The largest number of needs were in subcatgory of the emotional support related to disease(96 items, 40.5%). 5) In the social need category, there were five subcategories of support for social life, household management, legal support, the use of volunteer service, financial support. The largest number of needs were in support for social life subcategory(58 items, 31.5%).

• 복식문화연구
• /
• 제17권3호
• /
• pp.484-498
• /
• 2009

The purpose of this study is to explore the applicability of QFD to product development of clothes by empirically applying it to development of a specific clothes, middle and elderly women’s formal knitwear. The voices of customers(VOCs) for formal knitwear was collected through in-depth interviews with 25 customers, shop masters, and designers. Also, questionnaires of which respondents were 230 customers were used to rank the importance of the items of VOC. A QFD team of 10 knitwear experts implemented the task of translating VOCs into design attributes and measuring the values of the relationships between VOCs and design attributes. Importance ranking of the items of design attributes was obtained based on Lyman's method. The results of this study were as follows. First, the customer requirements for formal knitwear were classified into five dimensions, that is, symbolism, aesthetic, fitness, usefulness, and maintenance. Second, the descending order of the necessity of improving the quality was maintenance, aesthetic, fitness, usefulness, and symbolism. Third, three-staged design attributes were obtained as a result of translating of VOCs into design attributes. Lastly, the descending order of the importance of design attributes was "sorts of yarn", "sorts of color jacquard", "color", "tone", "ease", etc.

• 한국주거학회논문집
• /
• 제24권3호
• /
• pp.73-83
• /
• 2013

The aim of this paper is to examine the determinants of residential satisfaction and attachment according to the urban multi-family dwelling types. On the basis of the surveys, the factor analysis and regression are employed as the empirical analysis on residential satisfaction and attachment in Daegu metropolitan city. The major findings are as follows; First, as for post-occupancy evaluation of residential environment of building and outside, the residents of complex type of multi-family housing satisfied with most of items more than studio type except the location, amenity facilities around building and utilities fee. Second, about the Residential Satisfaction and Attachment by types, the residents of complex type of multi-family housing satisfied with most of items more than studio type too. Third, the determinants in residential Satisfaction of complex types are 'welfare and amenity facilities factor', 'maintenance factor' and 'location factor'. On the other hand, the determinants in residents of studio type are 'inexpensive rent fee factor', 'welfare and amenity facilities factor' and 'maintenance factor'. Going forward, this research will help us better understand residential satisfaction from the point of residents and find new ways to improve resident satisfaction and attachment.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.14-22
• /
• 2021

A plan for the development of reliability-based ROK amphibious assault vehicles is proposed. By analyzing the development case of the U.S. EFV, considerations for the successful development of the next-generation Korea Forces amphibious assault vehicle are presented. If the vehicle reliability can be improved to the level of the fourth highest priority electric unit for power units, suspensions, decelerators, and body groups, which have the highest priority among fault frequency items, a system level MTBF of 36.4%↑ can be achieved, and the operational availability can be increased by 3.5%↑. The next-generation amphibious assault vehicles must fulfill certain operating and performance requirements, the underlying systems must be built, and sequencing of the hybrid engine and the modular concept should be considered. Along with big-data- and machine-learning-based failure prediction, machine maintenance based on augmented reality/virtual reality and remote maintenance should be used to improve the ability to maintain combat readiness and reduce lifecycle costs.