• 한국물환경학회지
• /
• 제33권6호
• /
• pp.650-660
• /
• 2017

In this study, pollutant emission characteristics by water damage period analyzed 11 items (water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and flow) with load duration curve, time series load curve and factor analysis for three years (2014-2016). Load duration curve is applied to judge the level of impaired waterbody and estimate impaired level by pollutants such as BOD and T-P in this study depending on variation of stream flow. Water quality standard exceeded the flow of mid-range and low-range by flow condition evaluation using load duration curve. This watershed was influenced by point source more than non-point source. Cumulative excess rate of BOD and T-P kept water quality standard for all seasons (spring, summer, autumn and winter) except BOD 59% in spring. Water quality changes were influenced by pollutants of basic environmental treatment facilities and agricultural areas during spring and summer. Results of factor analysis were classified commonly first factor (BOD, COD, and TOC) and second factor (flow, water temperature and SS). Therefore, effects of artificial pollutants and maintenance water must be controlled seasonally and reduced relative to water damage caused by point pollution sources with effluent standard strengthened in the target watershed.

• 대한지역사회영양학회지
• /
• 제18권2호
• /
• pp.177-186
• /
• 2013

The purpose of this study was to investigate factors associated with Bone Mineral Density (BMD) in Korean postmenopausal women. The data from 2008-2010 Korean National Health and Nutrition Examination Survey (KNHANES) were used for data analysis. Subjects were 2,701 postmenopausal women aged ${\geq}50$ years. BMDs at whole body, total femur, femoral neck, and lumbar spine were measured by Dual-energy X-ray absorptiometry (DXA). Dietary data from 24-hour dietary recall and a food frequency questionnaire containing 63 food items were used. The proportions of osteopenia at total femur, femoral neck, and lumbar spine were 37.4%, 54.5%, and 45.4%, respectively. The proportions of osteoporosis at total femur, femoral neck, and lumbar spine were 6.2%, 25.6%, and 34.3%, respectively. Age, anthropometric index including height, weight, and Body Mass Index (BMI), parathyroid hormone, and physical activity were related to BMD, but the relationships were site specific. Total femur BMD was explained by age, weight, parathyroid hormone and intakes of carbohydrate and fruits. Femoral neck BMD was related to age, weight, parathyroid hormone and intakes of riboflavin and fruits. Lumbar spine BMD was associated with age, weight, milk and dairy products, calcium intake, and exercise. These results indicated that adequate intakes of milk and dairy products, fruits, carbohydrate, calcium, riboflavin and exercise as well as weight maintenance might play an important role in maintaining optimum bone health in Korean postmenopausal women.

• 한국컴퓨터정보학회논문지
• /
• 제13권4호
• /
• pp.273-280
• /
• 2008

본 논문은 국방 인사정보 S/W체계 개발에서 정량적 품질평가를 위한 것이다. ISO/IEC 9126에서 권고하는 국제표준에 입각한 정량적 품질평가방법을 적용한다. 계수적 평가의 6가지 기준을 제안하고 기능성, 신뢰성, 사용, 효율성, 유지보수성, 이식성과 세부 부특성 27항목을 설정하고, 품질 검사표는 S/W 품질을 측정하는 매트릭을 도표로 작성하였다. 국방사업의 특성을 반영한 우선순위에 의한 가중치를 주어 사용자의 목적에 맞는 국방 인사정보 S/W체계의 정량적인 평가방안을 연구하여 제시하였다. 정량적 품질평가적용에서 80%의 만족도와 현업 보직자 8명중 7명이 매우 만족(87.5%)과 1명은 만족(12.5%) 표시하여 신뢰성과 기능성에 대한 사용자의 만족도가 높은 것으로 판정되어 효율적인 국방 S/W사용과 효과를 분석하여 국방력의 향상에 기여하고자 한다.

• 대한안전경영과학회지
• /
• 제17권4호
• /
• pp.373-379
• /
• 2015

Supply units in each command are multi-tiered and each supply unit keeps a supply level independently, which can cause excess stock, leading false reports to the Logistics Command and increasing difficulties in managing user needs. This causes excess assets and the excess then causes deformation in demand. therefore, the supply support systems of our armed forces have become high-cost/low-efficiency and are insufficient to meet the needs of users in combat units. Civilian corporations and the US Department of Defense are downsizing the aforementioned multi-tiered supply systems thus revolutionizing efficient and effective logistics by adopting Supply Chain Management(SCM), and Prime Vendor policies. Prime Vendor policy is a logistics support method that allows users to directly request and receive supply items from suppliers, based on supply contracts between suppliers and central maintenance organizations like KDA. In other words, it is a system that allows for users to make orders to suppliers directly and suppliers to deliver goods to the users directly, cutting out the middle stage, thus allowing an efficient supply. This is a way forward in finance that cuts costs in net supplies and allows an efficient utilization of civilian assets. which is also known to fasten the speed of logistical support and stripping down the logistical structure. therefore, this report will explore Prime Vendor policies adopted in certain number of units for medical supplies that were taken in consideration of improvements in stock management in civilian organizations and the US Army, and aims to apply such policies for repair parts.

• 동아시아식생활학회지
• /
• 제19권3호
• /
• pp.316-326
• /
• 2009

Recently, local foods have drawn significant attention due to their intrinsic merits. Such foods not only have commercial potential, but also cultural value. Therefore, local foods must be well-maintained and fostered, and a comprehensive plan to develop them must be devised. In this aspect, various factors such as dietary attitudes, perceptions and concerns affecting their development should be considered. The present study was designed to investigate via survey the dietary attitudes, perceptions and concerns towards local foods among married women in Jeollabuk-do. The number of subjects was 434. According to the results, the highest frequency for consuming local foods was '1~3 times/month' for all ages. For the number of local foods subjects had ever tried, '7~8' was the highest overall with 36.8%, followed by '5~6', '3~4', '9~10', and '0~2' with 27.4%, 17.9%, 10.3% and 7.6%, respectively. However, there was a statistically significant difference according to age. The higher the person’s age, the higher the number of local foods they had tried. A similar pattern was shown in the number of local foods subjects had ever cooked. For those in their 20s and 30s, the highest number was '0~2', with 70.8% and 53.0%, respectively, while for those in their 40s the highest number was '3~4' with 38.5%, and for those above 50s it was '5~6' with 31.4%. Most of the subjects realized the need to advance the development of local foods. There were differences among the subjects for certain aspects concerning progression and development, opinions on the major drawbacks of local food development items served more often at home, and different views by age on taste modifications according to modern concepts. From this study, it can be concluded that the utilization of local foods increases with age, and the view that local food development should be based on the recovery and/or maintenance of original tastes becomes more prevalent with age.

• 한국CDE학회논문집
• /
• 제13권2호
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.

• 한국수자원학회논문집
• /
• 제53권spc1호
• /
• pp.797-811
• /
• 2020

경제수준의 증대로 인해 국민 삶의 질 제고에 대한 요구가 높아지는 상황에서, 하천의 주민 친화적 이용 및 관리에 대한 필요성이 커지고 있다. 본 연구에서는 일반주민이 체감할 수 있는 하천의 다면적 기능에 대한 성과를 측정하는 지표를 개발하고자 하였으며, 특히 주민들의 주관적 만족도를 측정할 수 있는 지표개발을 주요 목표로 하였다. 관련 선행 연구 및 사례분석을 바탕으로 하천의 치수, 이수, 환경, 친수 기능을 포괄하는 지표체계 초안을 구축하였으며, 설문조사와 PCA추출법, VARIMAX 회전법을 채택한 요인분석법을 통해 3개 영역, 6개 세부영역, 24개 평가항목으로 구성된 성과지표 체계를 도출하였다. 또한 개발한 지표를 대전 내 국가 및 지방하천에 적용하여 비교분석을 통한 시사점을 제시하였다.

• 한국건설관리학회논문집
• /
• 제13권5호
• /
• pp.35-44
• /
• 2012

건축물 유지관리 단계에서의 안전점검 및 정밀안전진단은 1, 2종 시설물에만 국한되어 있으나 중소규모 건축물이 전체 건축물의 99.4%를 차지할 정도로 많다는 점을 고려할 때, 중소규모 건축물의 안전진단은 반드시 필요하다. 이 연구에서는 현행 안전점검 및 정밀안전진단 체계의 문제점을 고찰하고, 중소규모 건축물에 적용할 수 있는 안전진단 모델을 개발하였다. 현행 평가방식을 고찰하고 설문조사를 통해 기존 상태평가 항목을 중소규모 건축물에 적합하게 조정하였다. 안전진단 모델 개발에 퍼지이론이 적용되었으며, 평가를 용이하게 하기 위해 웹기반 프로그램을 개발하였다. 이 연구의 결과를 실무에 적용한다면 1, 2종 이외의 중소규모 건축물도 안전점검 및 정밀안전진단을 효율적으로 수행할 수 있을 것이다.

• 디지털콘텐츠학회 논문지
• /
• 제15권1호
• /
• pp.101-112
• /
• 2014

특정 표준에 대한 사전 지식 없이 콘텐트를 저작할 수 있는 템플릿 기반의 이러닝 저작 도구가 활발히 개발되고 있다. 그러나 일반적인 웹 기반 HTML 저작도구에서 템플릿을 사용하기 위해서는 중요한 극복 사항이 있다. 콘텐트 내부에 템플릿이 삽입 되거나, 이를 편집 과정 중에 사용자의 의도치 않은 입력으로 템플릿 구조가 변형이 될 수 있다. 이것은 제한된 스키마를 준수해야하는 표준 콘텐트 저작에 있어서 큰 위험 요소가 된다. 본 논문은 위지윅 기반의 HTML 저작 도구에 삽입되는 템플릿 자원을 사용자가 임의로 변형하는 것을 막을 수 있는 효과적인 유지 기법을 제안한다. 우리는 웹 기반 오픈 소스에디터인 tinyMCE에 IMS-QTI 표준 문항을 생성할 수 있는 템플릿 플러그인을 추가하였다. 그리고 사용자의 의도치 않은 입력 행위에 대응하여 템플릿의 구조가 지속적으로 유지 가능하게 하는 tinyMCE용 플러그인 모듈을 구현하였다. 제안하는 기법은 tinyMCE 이외에도 다양한 오픈 소스 기반의 편집 도구에 적용 가능하다는 장점이 있다.

• 설비공학논문집
• /
• 제24권9호
• /
• pp.657-662
• /
• 2012

The cogeneration system can operate at efficiencies greater than those achieved when heat and power are produced in separate. The optimal system can be determined by selecting the auxiliary system combined with cogeneration system. In the present study, economic investigation has been conducted with the cogeneration electric heat pump(EHP) system and the cogeneration absorption chiller(AC) system to install in a school dormitory. To analyze life cycle cost(LCC), cost items such as initial investment costs, annual energy costs and maintenance costs of each system have been considered. The initial investment cost is referred to the basis of estimated costs, and annual energy costs such as the electric power and gas consumption are based on the data in a school dormitory. LCC is evaluated with the present worth method. Considering investigated results, the initial investment cost of the cogeneration EHP system is more profitable about 24% than that of the cogeneration AC system. The energy cost of the cogeneration EHP system is more profitable about 8% than the cogeneration AC system. The LCC shows that the cogeneration EHP system is the most effective system in the school dormitory.