• Journal of Korean Society on Water Environment
• /
• v.33 no.6
• /
• pp.650-660
• /
• 2017

In this study, pollutant emission characteristics by water damage period analyzed 11 items (water temperature, pH, DO, EC, BOD, COD, TOC, SS, T-N, T-P and flow) with load duration curve, time series load curve and factor analysis for three years (2014-2016). Load duration curve is applied to judge the level of impaired waterbody and estimate impaired level by pollutants such as BOD and T-P in this study depending on variation of stream flow. Water quality standard exceeded the flow of mid-range and low-range by flow condition evaluation using load duration curve. This watershed was influenced by point source more than non-point source. Cumulative excess rate of BOD and T-P kept water quality standard for all seasons (spring, summer, autumn and winter) except BOD 59% in spring. Water quality changes were influenced by pollutants of basic environmental treatment facilities and agricultural areas during spring and summer. Results of factor analysis were classified commonly first factor (BOD, COD, and TOC) and second factor (flow, water temperature and SS). Therefore, effects of artificial pollutants and maintenance water must be controlled seasonally and reduced relative to water damage caused by point pollution sources with effluent standard strengthened in the target watershed.

• Korean Journal of Community Nutrition
• /
• v.18 no.2
• /
• pp.177-186
• /
• 2013

The purpose of this study was to investigate factors associated with Bone Mineral Density (BMD) in Korean postmenopausal women. The data from 2008-2010 Korean National Health and Nutrition Examination Survey (KNHANES) were used for data analysis. Subjects were 2,701 postmenopausal women aged ${\geq}50$ years. BMDs at whole body, total femur, femoral neck, and lumbar spine were measured by Dual-energy X-ray absorptiometry (DXA). Dietary data from 24-hour dietary recall and a food frequency questionnaire containing 63 food items were used. The proportions of osteopenia at total femur, femoral neck, and lumbar spine were 37.4%, 54.5%, and 45.4%, respectively. The proportions of osteoporosis at total femur, femoral neck, and lumbar spine were 6.2%, 25.6%, and 34.3%, respectively. Age, anthropometric index including height, weight, and Body Mass Index (BMI), parathyroid hormone, and physical activity were related to BMD, but the relationships were site specific. Total femur BMD was explained by age, weight, parathyroid hormone and intakes of carbohydrate and fruits. Femoral neck BMD was related to age, weight, parathyroid hormone and intakes of riboflavin and fruits. Lumbar spine BMD was associated with age, weight, milk and dairy products, calcium intake, and exercise. These results indicated that adequate intakes of milk and dairy products, fruits, carbohydrate, calcium, riboflavin and exercise as well as weight maintenance might play an important role in maintaining optimum bone health in Korean postmenopausal women.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.273-280
• /
• 2008

This paper is thing for a quantitive quality evaluation in national Defense Human Resource Management Information S/W system development. Apply a quantitive quality evaluation way to be based on an international standard to admonish at ISO/IEC 9126. Proposed 6 basis of count, and set up sub 27 items detailed functionality, reliability, use anger, efficiency, maintenance anger, a transplant result, and inspection of quality table wrote the Matrix measured S/W quality to a chart. Studied a quantitive evaluation plan of a Defense Human Resource Management Information S/W system to see weight by the priority order that reflected a characteristic of a national defense business to a Purpose of a subject user, and Presented. It is 80% in quantitive quality evaluation application satisfied under 8, Very Satisfied 7(87.5%) Satisfied 1(12.5%) of Defense Human Resource Managers and judgment worked as marked so that satisfaction of reliability and a user regarding functionality was high and there will be contribute to an elevation of defense capabilities as analyze efficient national defense S/W use and effect.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.373-379
• /
• 2015

Supply units in each command are multi-tiered and each supply unit keeps a supply level independently, which can cause excess stock, leading false reports to the Logistics Command and increasing difficulties in managing user needs. This causes excess assets and the excess then causes deformation in demand. therefore, the supply support systems of our armed forces have become high-cost/low-efficiency and are insufficient to meet the needs of users in combat units. Civilian corporations and the US Department of Defense are downsizing the aforementioned multi-tiered supply systems thus revolutionizing efficient and effective logistics by adopting Supply Chain Management(SCM), and Prime Vendor policies. Prime Vendor policy is a logistics support method that allows users to directly request and receive supply items from suppliers, based on supply contracts between suppliers and central maintenance organizations like KDA. In other words, it is a system that allows for users to make orders to suppliers directly and suppliers to deliver goods to the users directly, cutting out the middle stage, thus allowing an efficient supply. This is a way forward in finance that cuts costs in net supplies and allows an efficient utilization of civilian assets. which is also known to fasten the speed of logistical support and stripping down the logistical structure. therefore, this report will explore Prime Vendor policies adopted in certain number of units for medical supplies that were taken in consideration of improvements in stock management in civilian organizations and the US Army, and aims to apply such policies for repair parts.

• Journal of the East Asian Society of Dietary Life
• /
• v.19 no.3
• /
• pp.316-326
• /
• 2009

Recently, local foods have drawn significant attention due to their intrinsic merits. Such foods not only have commercial potential, but also cultural value. Therefore, local foods must be well-maintained and fostered, and a comprehensive plan to develop them must be devised. In this aspect, various factors such as dietary attitudes, perceptions and concerns affecting their development should be considered. The present study was designed to investigate via survey the dietary attitudes, perceptions and concerns towards local foods among married women in Jeollabuk-do. The number of subjects was 434. According to the results, the highest frequency for consuming local foods was '1~3 times/month' for all ages. For the number of local foods subjects had ever tried, '7~8' was the highest overall with 36.8%, followed by '5~6', '3~4', '9~10', and '0~2' with 27.4%, 17.9%, 10.3% and 7.6%, respectively. However, there was a statistically significant difference according to age. The higher the person’s age, the higher the number of local foods they had tried. A similar pattern was shown in the number of local foods subjects had ever cooked. For those in their 20s and 30s, the highest number was '0~2', with 70.8% and 53.0%, respectively, while for those in their 40s the highest number was '3~4' with 38.5%, and for those above 50s it was '5~6' with 31.4%. Most of the subjects realized the need to advance the development of local foods. There were differences among the subjects for certain aspects concerning progression and development, opinions on the major drawbacks of local food development items served more often at home, and different views by age on taste modifications according to modern concepts. From this study, it can be concluded that the utilization of local foods increases with age, and the view that local food development should be based on the recovery and/or maintenance of original tastes becomes more prevalent with age.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.2
• /
• pp.139-152
• /
• 2008

In order to survive worldwide competition, today's industries are experiencing strong pressure to introduce higher quality products with lower cost and shorter lead-time. Therefore, the role of design in the process of product development is increasing in significance. In this research, two methods for improving the design capability are proposed: construction of design environment and design automation using 3D CAD system. The designers and design process are the core of product design using 3D CAD system. In order to maximize the design performance, construction of the design environment including selection of a suitable system, designer training for best use of the system, establishment of an efficient design process, and stabilization of the environment are required. A method is suggested to construct design environment by systematizing the contents of the projects and consulting experiences carried out for various categories of business such as electronic devices, motorcycles, electricity parts, sanitary wares, injection molds, and die casing molds. Design automation helps reduce tedious and time-consuming jobs, simplify complicated and error-prone modeling and drawing works to shorten the lead time and improve the product quality. To develop a design automation system, understanding the process and the related knowledge on design are very important before implementing the system using API provided by 3D CAD system. In this research, an eight-step procedure is proposed for the development of a design automation system. These eight steps are analysis of needs, determination of specification, verification of specification using 3D CAD system, inspection of related API functions, programming, field test, application in practice, and maintenance. A case study in which five design automation systems in the design of turbine generators using the proposed method is introduced in detail. These systems play important roles in the generation of various output items including 3D models, drafts, material information, and NC data. The case study shows how effectively the design time is reduced and the quality improved using those systems.

• Journal of Korea Water Resources Association
• /
• v.53 no.spc1
• /
• pp.797-811
• /
• 2020

With the increasing demand for improving the quality of life of the people, the need for resident-friendly use and management of rivers is increasing. This study develops an indicator that can measure the performance of the multi-faceted function of the river that the general population can appraise, and in particular, the subjective satisfaction of residents. Based on related prior studies and case analysis, a draft indicator system covering maintenance of river facilities for flood control, water use, environment protection, and water-friendly use functions was established. Through a factor analysis adopting PCA extraction method and VARIMAX rotation method and survey, a performance indicator system consisting of three areas, six detailed areas, and 24 items is drawn. Also, the developed indicators are applied to national and local rivers in Daejeon to suggest implications through comparative analysis.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.5
• /
• pp.35-44
• /
• 2012

In the current maintenance system of building, safety inspection and precise safety diagnosis have been applied only for Type 1 and 2 buildings. Considering the fact that middle and small-size buildings take up 99.4% of total buildings, it is necessary to implement safety diagnosis for the buildings to make long lasting buildings. This study suggested improvement methods for adjusting the existing evaluation items to middle and small-size buildings by reviewing the current diagnosis system and a survey. Based on the methods, an improved model, which modified the existing diagnosis model, was developed by applying fuzzy theory. If the improved model of this study is applied on site, the buildings except Type 1 and 2 could be maintained constantly. In the future studies, it is necessary to implement the developed model practically, to strengthen the feasibility of the model.

• Journal of Digital Contents Society
• /
• v.15 no.1
• /
• pp.101-112
• /
• 2014

Existing tools using in the standard e-learning contents authoring were used a method to provide users contents template produced in advance. In order to use resources of the template in a common web-based authoring tool, there is problem to overcome. If the resource of template is inserted within the contents on the authoring tool, the deformation of the template by the user's input that may occur during the edit process cannot be controlled. In this paper, we propose an effective maintenance method to prevent deformation of the resource of template inserted into any WYSIWYG-based HTML authoring tool by user's discretion. We added a template plug-in that can create the IMS-QTI standard resource in tynyMCE the web-based open source editor of representative examples. And the plug-in for tinyMCE was realized as a module of directly respond to the action of limited user input. So, in response to the action of user's input, the structure of the template can be sustained possibly.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.9
• /
• pp.657-662
• /
• 2012

The cogeneration system can operate at efficiencies greater than those achieved when heat and power are produced in separate. The optimal system can be determined by selecting the auxiliary system combined with cogeneration system. In the present study, economic investigation has been conducted with the cogeneration electric heat pump(EHP) system and the cogeneration absorption chiller(AC) system to install in a school dormitory. To analyze life cycle cost(LCC), cost items such as initial investment costs, annual energy costs and maintenance costs of each system have been considered. The initial investment cost is referred to the basis of estimated costs, and annual energy costs such as the electric power and gas consumption are based on the data in a school dormitory. LCC is evaluated with the present worth method. Considering investigated results, the initial investment cost of the cogeneration EHP system is more profitable about 24% than that of the cogeneration AC system. The energy cost of the cogeneration EHP system is more profitable about 8% than the cogeneration AC system. The LCC shows that the cogeneration EHP system is the most effective system in the school dormitory.