• Journal of Power Electronics
• /
• v.14 no.2
• /
• pp.217-225
• /
• 2014

This paper deals with the optimization of the driving techniques for the ZVT synchronous buck converter proposed in [1]. Two new gate drive circuits are proposed to allow this converter to operate by only one control signal as a 12V voltage regulator module (VRM). Voltage-driven method is applied for the synchronous rectifier. In addition, the control signal drives the main and auxiliary switches by one driving circuit. Both of the circuits are supplied by the input voltage. As a result, no supply voltage is required. This approach decreases both the complexity and cost in converter hardware implementation and is suitable for practical applications. In addition, the proposed SR driving scheme can also be used for many high frequency resonant converters and some high frequency discontinuous current mode PWM circuits. The ZVT synchronous buck converter with new gate drive circuits is analyzed and the presented experimental results confirm the theoretical analysis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.5
• /
• pp.359-363
• /
• 2011

To integrate the sensor driver and logic circuits, fabricating down scaled transistors has been main issue. At this research, short channel effects were analyzed after n channel polycrystalline silicon thin film transistor was fabricated at high temperature. As a result, on current, on/off current ratio and transconductance were increased but threshold voltage, electron mobility and s-slope were reduced with a decrease of channel length. When carriers that develop at grain boundary in activated polycrystalline silicon have no gate biased, on current was increased with punch through by drain current. Also, due to BJT effect (parallel bipolar effect) that developed under region of channel by increase of gate voltage on current was rapidly increased.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.8 no.2
• /
• pp.12-21
• /
• 2009

The purpose of this study is to suggest a scheme to provide children safer and more comfortable walking circumstances by survey current walking circumstances of school zone ways. First, to avoid pedestrian roads being interrupted and to expand waiting space near school zone ways, several measures are needed including fixing roads, using schools' unemployed spaces and building additional gateway. Second, pedestrian crossings in front of school gate should be located at least 23.16m away from the left side of the gate. Third, on narrow path which cross main streets, the interval of pedestrian signal should be extended as against of the moment. And traffic calming facilities should be built on accurate position. Fourth, to secure pedestrians' safety and field of view, trees lining streets and any obstacles located within 10m from bus stop sign should be removed. Finally, education system about school zone ways should be improved to help children get used to more complicated roads' conditions.

• Journal of Information Display
• /
• v.10 no.2
• /
• pp.54-61
• /
• 2009

The results of the optimization of the organic passivation process for fabricating thin-film transistors (TFTs) with a high aperture ratio on a seventh-generation glass (2200${\times}$1870 mm) substrate for LCD-TV panels are reported herein. The optimization of the organic passivation process has been verified by checking various factors, including the material properties (e.g., thickness, stain, etching, thermal reflow) and the effects on the TFT operation (e.g., gate/data line delay and display-driving properties). The two main factors influencing the organic passivation process are the optimization of the final thickness of the organic passivation layer, and the gate electrode. In conclusion, the minimum possible final thickness was found to be $2.42{\um}m$ via simulation and pilot testing, using the full-factorial design. The optimization of the organic passivation layer was accomplished by improving its brightness by over 10 cd/$m^2$ (ca. 2% luminance) compared to that of the conventional organic passivation process. The results of this research also help reduce the reddish stain on display panels.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.E
• /
• pp.45-59
• /
• 1992

At downstream part of the hydraulic structures such as spiliway or drainage gate, jet flow can occur by gate opening. If stream bed is not hard or bed protection is not sufficient, scour hole will be formed due to high shear stress of the jet flow. We call this primary scour. Once the scour hole is formed, a vortex occurs in it and this vortex causes additional scour. We call this secondary scour. The primary scour proceeds to downstream together with flow direction but the secondary one proceeds to upstream direction opposite to it. If the secondary one continues and reaches to the hydraulic structure, it can undermine the bottom of hydraulic structure and this will lead to failure of structure itself. Thus, it is necessary to know the physical features of the vortex structure in a scour hole, which is the main mechanism of the secondary scour. This study deals with the characteristics of the vortex structure and its shear stress which causes the secondary scour.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.728-745
• /
• 2021

Carbon nanotube field-effect transistors (CNTFETs) have been widely studied as a promising technology to be included in post-complementary metal-oxide-semiconductor integrated circuits. Despite significant advantages in terms of delay and power dissipation, the fabrication process for CNTFETs is plagued by fault occurrences. Therefore, developing a fast and accurate method for estimating the reliability of CNTFET-based digital circuits was the main goal of this study. In the proposed method, effects related to faults that occur in a gate's transistors are first represented as a probability transfer matrix. Next, the target circuit's graph is traversed in topological order and the reliabilities of the circuit's gates are computed. The accuracy of this method (less than 3% reliability estimation error) was verified through various simulations on the ISCAS 85 benchmark circuits. The proposed method outperforms previous methods in terms of both accuracy and computational complexity.

• Journal of the Korean housing association
• /
• v.19 no.2
• /
• pp.105-114
• /
• 2008

This study is conducted to investigate the organization of Cheongunri in Cheong-song, as well as the characteristics of folk houses. In this study, 82 folk houses, including the villages, are surveyed; among them, 15 houses are intensively analyzed in terms of the structure of plane and the arrangement of space. The focus of study is on discovering an internal order system of villages and tracing a relationship between the characteristics of houses and the environmental factors. According to the results of the study, an Intrinsic order in Cheongunri is found to be related to the mountain axis, the road system, and the flow axis; and the form of folk houses is also found to be influenced by this order. The major characteristics of folk houses can be summarized as follows: (1) Most of the houses face east along the mountain axis, whereas houses influenced by the flow axis tend to face south. (2) The side of houses tend to be open to the outside, showing external directionality. This characteristic seems to be closely related to the direction of the main gate in a house site. (3) The layout of the main quarters and the annex quarters is found to be related to the direction of the main gate in a house site. Especially, the characteristics of courtyard are found to be affected by the annex quarters. From the above results, it can be concluded that villages have an intrinsic order depending on the geographic characteristics of a surrounding natural environment, and folk houses have also changed accordingly.

• Journal of Korean Society of Rural Planning
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2008

The main entrance is even disappeared nowadays when the component type is changed, because it loses the actual function. On the other hand, the type of main entrance is changed variously depended on the materials for house and method of construction. Eleven points in the Chungyang-Gun where the environment of rural villages is well maintained was choosed researched to make data. These data of visual component elements were analysed by using the SPSS 12.0 Windows. Cluster Analysis and Factor Analysis was performed to analyze the different types of main entrance in the rural villages. From the above research, we could conclude below results. Research result, The whole quality of the farming village gate with fine feeling and constant temperature characteristic order appeared with the fact that preference quality is highest, in afterwords was analyzed. Also the research which sees led and the result which appears from the landscape quality analysis which the residential gates are general and type by landscape quality analysis the result which appears with the comparative analysis overcomes the limit which the residential gates are general and type by landscape quality analysis the result which appears with the comparative analysis overcomes the limit which the abstractive landscape image has. Like this research result judges currently the research which is meaning which provides a planning standards and the guideline which the governmental department and the rural village improvement enterprising public opinion rural village residential enterprise which is propelling from oneself are detailed. Specially about landscape quality of the residential gate that presents a type classification and preference quality from the actual condition where the research is insufficient the hereafter rural village improvement enterprise specially, sees with the fact that will be the possibility of affecting is meaning to residential section the succeeding researches actively, there being could be advanced, wishes.

• Journal of architectural history
• /
• v.30 no.6
• /
• pp.71-80
• /
• 2021

This study tries to shed light on character and architectural features of the 2nd construction of Bunhwangsa temple in the mid-8th century. The site of Bunhwangsa Temple is divided into upper and lower areas based on retaining walls running from northwest to southeast, and the main area of the temple centered on Geumdang(the main hall) is located in the upper area. Space composition of the lower area including Wonji(a garden pond) and Gangdang(a lecture hall), is noteworthy in that Bunhwangsa Temple was constructed in a deviating way from rigorous constructional disciplines and used their space efficiently. The Geumdang in the 2nd construction was the largest worship hall with 7×6 bays. The hall was designed to divide its space into two ; the core space was surrounded by outer space. Each gap between columns in the hall was narrowed from center to outer. The main construction of the Geumdang was built as a stable structure with lead-to corridors. This was a much-advanced style than Geumdang at Hwangnyongsa Temple. The Gangdang is presumed to be a large building site as a typical Gangdang style in the Silla era. It was built in the late 9th century and was located in the northern part of the retaining walls. The composition of the middle gate and southern corridors were in double and long corridor style and they were located in front of the 2nd construction. This style coincided in the form of the architectural style of the Hwangnongsa Temple. The 2nd construction of the Bunhwangsa Temple was smaller than the Hwangnongsa Temple. However, it was a prestigious architecture.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1789-1796
• /
• 2012

In this paper, a new high-efficiency CMOS bridge rectifier for driving RFID tag chips is designed and analyzed. The input stage of the proposed rectifier is designed as a cascade structure connected with two NMOSs for reducing the gate capacitance by circuitry method, which is the main path of the leakage current that is increased when the operating frequency is increased. This gate capacitance reduction technique using the cascade input stage for reducing the gate leakage current is presented theoretically. The output characteristics of the proposed rectifier are derived analytically using its high frequency small-signal equivalent circuit. For the general load resistance of $50K{\Omega}$, the proposed rectifier shows better power conversion efficiencies of 28.9% for 915MHz UHF (for ISO 18000 -6) and 15.3% for 2.45GHz microwave (for ISO 18000-4) than those of 26.3% and 26.8% for 915MHz, and 13.2% and 12.6% for 2.45GHz of compared other two existing rectifiers. Therefore, the proposed rectifier may be used as a general purpose rectifier to drive tag chips for various RFID systems.