• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.11-20
• /
• 2001

The paper describes the conceptual design, structural modelling and wind load analysis of tall buildings. The lateral stiffness of the building can be obtained economically through the interaction of core walls with peripheral frame tube and/or bundle of frame tubes and integrated design of the basement. The main structural components should be properly distributed such that the building will deflect mainly in the direction of the applied force without inducing significant response in other directions and twist. The cost effectiveness can be further enhanced through close consultation between architects and engineers at an early stage of conceptual design. Simplified structural modelling of the building and its response in three principal directions due to wind load are included. Effects of the two main structural components on the performances of a 70-story reinforced concrete building in terms of peak drift and maximum acceleration under wind load are discussed.

• Corrosion Science and Technology
• /
• v.12 no.5
• /
• pp.227-232
• /
• 2013

A number of components installed in the secondary system of nuclear power plants are exposed to aging mechanisms such as FAC (Flow-Accelerated Corrosion), Cavitation, Flashing, and LDIE (Liquid Droplet Impingement Erosion). Those aging mechanisms can lead to thinning of the components. In April 2013, one (1) inch small bore piping branched from the main steam line experienced leakage resulting from wall thinning in a 1,000 MWe Korean PWR nuclear power plant. During the normal operation, extracted steam from the main steam line goes to condenser through the small bore piping. The leak occurred in the downstream of an orifice. A control valve with vertical flow path was placed on in front of the orifice. This paper deals with UT (Ultrasonic Test) thickness data, SEM images, and numerical simulation results in order to analyze the extent of damage and the cause of leakage in the small bore piping. As a result, it is concluded that the main cause of the small bore pipe wall thinning is liquid droplet impingement erosion. Moreover, it is observed that the leak occurred at the reattachment point of the vortex flow in the downstream side of the orifice.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.864-870
• /
• 2005

Hydraulic excavators have been popular devices in construction field because of its multi-workings and economic efficiency. The mathematical models of excavators have many nonlinearities because of nonlinear opening characteristics and dead zone of main control valve, oil temperature variation, etc. The objective of this paper is to develop a simulator for hydraulic excavator using AMESim. Components and whole circuit are expressed graphically. Parameters and nonlinear characteristics are inputted in text style. From the simulation results, fixed spring stiffness of MCV can't satisfy accuracy of spool displacement under whole P-Q diagrams. Closed loop type MCV containing proportional gain is proposed in this paper that can reduce displacement error. The ability of closed loop MCV is verified through comparing with normal type MCV using AMESim simulator. The simulator can be used to forecastexcavator behavior when new components, new mechanical attachments, hydraulic circuit changes, and new control algorithm are applied. The simulator could be a kind of development platform for various new excavators.

• YAKHAK HOEJI
• /
• v.49 no.4
• /
• pp.312-316
• /
• 2005

To develop a new natural antibiotics from Koran plant resources for dealing with the current situation regarding the rapid increase in antibiotic-resistant pathogen, the in vitro inhibitory activities of essential oils from the young leaves of Glehnia littoralis (Umbelliferae) as well as its main constituents were evaluated against susceptible and resistant species of Streptococcus pneumoniae. The essential oil fraction of G. littoralis and its main components, $\alpha-and\;\beta-pinene$, exhibited significant inhibitory activities against the antibiotic-susceptible and resistant strains of S. pneumoniae, with MICs (minimum inhibiting concentrations) ranging from 4.0mg/ml to 16mg/ml. No remarkable differences were shown between the susceptible and resistant strains. Moreover, the disk diffusion test disclosed that these inhibitory activities were dose­dependent. Furthermore, data from the checkerboard titer test with FICIs (fractional inhibiting concentration indices) from 0.15 to 0.28 indicated synergisms between norfloxacin and $\alpha-or\;{\beta}-pinene$ in activity against S. pneumoniae KCCM49629 and S. pneumoniae CCARM4059.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2010

Numerical simulation of unsteady flows around helicopters was conducted to investigate the aerodynamic interaction of main rotor and other components such as fuselage and tail rotor. For this purpose, a three-dimensional inviscid flow solver has been developed based on unstructured meshes. An overset mesh technique was used to describe the relative motion between the main rotor, and other components. As the application of the present method, calculations were made for the rotor-fuselage aerodynamic interaction of the ROBIN (ROtor Body INteraction) configuration and for a complete UH-60 helicopter configuration consisted of main rotor, fuselage, and tail rotor. Comparison of the computational results was made with measured time-averaged and instantaneous fuselage surface pressure distributions for the ROBIN configuration and thrust distribution and available experimental data for the UH-60 configuration. It is demonstrated that the present method is efficient and robust for the simulation of complete rotorcraft configurations.

• The Korean Journal of Food And Nutrition
• /
• v.3 no.2
• /
• pp.149-160
• /
• 1990

The soybean $\beta$-amylase ($\alpha$-1, 4-glucan maltohydrolase, EC 3.2.1.2) is composed of seven isozymes(I', I, II, III, IV, V and VI), and isozyme II and IV are the main components among these. The Purification of $\beta$-amylase isozymes from soybean whey were performed by ammonium sulfate fractionation, CM-Sephadex C-50 column chromatography, DEAE-Sephadex chromatography and Gel filtration. The resulted purity of $\beta$-amylase was throughly confirmed by electrophoresis, and then determined its isoelectric point and molecular weight. The results obtained were as follows, 1. Five active fractions of soybean p-amylase were derived on CM-Sephadex C-50 column chromatography. 2. Seven active bands of p-amylase isozymes were detected by isoelectric focusing gel electrophoresis, and their isoelectric points(I' to VI) were 5.07, 5.15, 5.25, 5.40, 5.55, 5.70 and 5.93, respectively. 3. Isozyme II and IV were main components of soybean $\beta$-amylase. 4. The molecular weights of both isozyme II and IV were determined to be 56,000 daltons by the result of SDS polyacrylamide gel electrophoresis. 5. Km values of main isozyme II & IV for amylopectin were determined to be 2.25 mg/ml, which suggest the same function of each isozyme.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.1
• /
• pp.85-93
• /
• 2019

Oil seals are most essential parts in mechanical lubrication system to maintain the close gaps between stationary and high rotating components, and to help prevent oil leakages. Oil seals also can prevent harmful contaminants entering from outside to machinery, especially in severe environments. Therefore, the oil seals have an important performance in the machinery components. The performance of the oil seals are influenced by the design variables such as amount of interference gap between the main lip and shaft, the angle of main lip at air and oil sides and the distance between the garter spring and main lip. In the present study, a finite element analysis was performed to evaluate the oil seal performance with the considerations of number of oil seal dust lips and angle of the lip at oil side with the different design variables. As a result from the FEM analysis, the stress and contact pressure distributions was derived, based on this, performance of the sealing and durability were determined.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2018.05a
• /
• pp.245-246
• /
• 2018

• Biomolecules & Therapeutics
• /
• v.9 no.1
• /
• pp.51-54
• /
• 2001

Bufonis Venenum is a toad venom and its main components are bufadienolides, namely resibufogenin, bufalin and cinobufagin. The desensitizing effect of Bufonis Venenum is useful for the treatment of the premature ejaculation in Chinese medicine. But, minor components of Bufonis Venenum cause problems such as topical burring, pain, and erectile dysfunction. To clarify and eliminate the components responsible for these side effects, we prepared two extracts of Bufonis Venenum with either 70% ethanol or ethylacetate and tested their pharmacological effects. The extract of Bufonis Venenum with 70% ethanol produced pain response in rat hind paw, and exhibited contraction of rabbit corpus cavernosal muscle in vitro. On the other hand, the ethylacetate extract did not cause pain and smooth muscle contraction. The desensitizing effect of the ethylacetate extract was similar to that of the 70% ethanol extract. In conclusion, these results show that the extract of Bufonis Venenum with ethylacetate does not have the components causing side effects and deserve further study for therapeutic potential in premature ejaculation in men.

• Journal of Information Technology Applications and Management
• /
• v.11 no.4
• /
• pp.133-145
• /
• 2004

The two main purposes of this paper are to 1) investigate critical components of university information systems for information resources management, 2) develop a comprehensive framework model of university information systems for e-Business Era. Through a literature review and by employing group decision making techniques with managers of K University, critical components for developing university information systems were identified. The critical components of university information systems are 1) academic affaires. 2) general administration. (3) research administration. (4) information services. (5) management support, (6) cyber education. (7) knowledge management, (8) e-library. (9) mobile service. and (10) IT infrastructures. In the second stage. by employing IT experts in K University and other institutes. a comprehensive framework of university information systems for e-Business era was developed. The comprehensive framework shows that major components for university information resources management are (1) information infrastructure. (2) common operating environments. (3) applications/information services. The results of this study expect to help managers. who are in charge of university information systems. plan to develop information systems based on the framework proposed in this paper.