• 말소리와 음성과학
• /
• 제15권3호
• /
• pp.59-67
• /
• 2023

본 연구는 연장음의 길이에 따른 비유창성 지각 정도에 대해 각각 등간척도와 직접크기평정을 통한 청지각적 평가를 실시한 후, 두 평가의 결과치가 선형적인 또는 비선형적인 관계를 보이는지를 알아보고자 진행되었다. 이를 통해 연장음의 길이에 따른 비유창성 지각 정도에 대한 적절한 평가 방법을 제안하고자 하였다. 이를 위해 한국어를 모국어로 하는 만 19세 이상 성인 남녀 34명(남: 9명, 여: 25명, 평균연령: 32.9세)이 평가자로 참여였다. 실험참여자는 먼저 한국어 평마찰음 /s/를 원래 길이에서 80 ms씩 연장하여 2,000 ms(i.e., 285 ms, 365 ms., ..., 2,125 ms, 2,205 ms)까지 연장 변조한 총 25개의 자극이 들어 있는 문장을 듣고, 등간척도(1-7점, 1은 '정상', 7은 '심도')로 평가하였다. 이후에 등간척도 평가 결과, '경중도'(4점)에 해당하는 음성샘플을 선정해 이를 기준 평가치(modulus)로 하여 직접크기평정을 실시하였다. 두 평가 결과치에 대한 산포도를 작성한 후, 모형 분석을 통해 두 측정치 간의 관계가 선형적(linear)인지 비선형적(curvilinear)인지 R²값을 통해 조사하였다. 연구 결과, 두 평가 결과치의 관계가 비선형적인 양상을 보이는 것으로 나타났으며 이는 연장음의 길이에 따른 비유창성 정도 평가에 있어 등간척도보다는 직접크기평정이 적절한 평가 방법임을 보여주는 결과이다.

• 한국멀티미디어학회논문지
• /
• 제20권8호
• /
• pp.1248-1257
• /
• 2017

We propose a frequency estimation algorithm of human movements using Kinect. We collect the 3D coordinates of the joints of a human body and then obtain the frequency-domain description of the movements using the discrete Fourier transform (DFT). By choosing the frequency with the biggest magnitude in the selected frequencies of each of human's joint, we obtain the major beat of the human movements. Experimental results show that the proposed algorithm accurately estimates the frequency of human movements. We expect that the proposed algorithm would be applied to many AR and VR applications as a preprocessing.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.43-48
• /
• 2016

Operational applications such as service restoration, voltage control and protection coordination are calculated based on the active and reactive power loading of the sections in the distribution networks. Loadings of the sections are estimated using the voltage and current measured from the automatic switches deployed along the primary feeders. But, due to the characteristics of the potential transformer attached to the switches, accuracy of the voltage magnitude is not acceptable to be used for section loading calculation. This paper proposes a new accurate section loading estimation method through voltage measurement error compensation by calculating voltage drop of the distribution line. In order to establish feasibility of the proposed method, various case studies based on Matlab simulation have been performed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1996년도 창립기념 전력전자학술발표회 논문집
• /
• pp.17-20
• /
• 1996

An adaptive current control scheme of a permanent magnet (PM) synchronous motor with the simultaneous estimation of the magnitude of the flux linkage and stator resistance is proposed. The adaptive parameter estimation is achieved by a model reference adaptive system (MRAS) technique. The adaptive laws are derived by the Popov's hyperstability theory and the positivity concept. The predictive control scheme is employed for the current controller with the estimated parameters. The robustness of the proposed current control scheme is compared with the conventional one through the computer simulations.

• 전자공학회논문지S
• /
• 제34S권2호
• /
• pp.33-42
• /
• 1997

In this paper, a video coding method in wavelet transformed multi-resolution image using variable block sized motion estimation and multi-codebook is proposed. In the propoed method, the accuracy of motion estimation is increased by using variable block matching algorithm based on edge type of blocks which estimation is increased by using variable block matching algoritm based on edge type of blocks which is classified accoridng to the magnitude of wavelet coefficients in vertical subband and horizontal subband of the highest layer. Also, we increased the flexibility of bit allocation and decreased vector quantization error for motion compensated error transmission by using importance of each subband. Some experimental results confirm that he proposed mothod has fine reconstructed images without blocking effect at low bit rate, and especially reconstructs edges well to which human eyes are sensitive.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2292-2297
• /
• 2010

To improve the performances of Sawyer motors and to regulate yaw rotation, various feedback control methods have been developed. Almost all of these methods require information on the position, velocity or full state of the motor. Therefore, in this paper, a nonlinear observer is designed to estimate the full state of the four forcers in a Sawyer motor. The proposed method estimates the full state using only positional feedback. Generally, Sawyer motors are operated within a yaw magnitude of several degrees; outside of this range, Sawyer motors step out. Therefore, this observer design assumes that the yaw is within ${\pm}90^\b{o}$. The convergence of the estimation error is proven using the Lyapunov method. The proposed observer guarantees that the estimation error globally exponentially converges to zero for all arbitrary initial conditions. Furthermore, since the proposed observer does not require any transformation, it may result in a reduction in the commutation delay. The simulation results show the performance of the proposed observer.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.68-71
• /
• 2002

A research on accident loss calculation for polyol process without safety management activities, and safety cost estimation using process risk assessment has been implemented. In order to estimate a magnitude of loss, accident scenarios were made by combining result made from HAZOP Study method with accident possibility analysis results implemented with FTA. Also effect assessment was implement for accident consequence of each scenario. And minimum possible loss cost has been calculated when safety investment do or not. Result from cost-benefit analysis was shown as approximately \335 billion(=USS44,000 billion), as cost after subtracting safety management cost from minimum possible loss cost.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.630-635
• /
• 2002

This work is concerned with the damage size estimation by using propagating bending wave signals in a beam. For the accurate estimation, we apply the continuous wavelet transforms to the incident waves and the reflected waves from a small damage in a long cylindrical beam. In particular, we propose to use the ratio of the magnitude of the incident and reflected waves along the ridges in the wavelet-transformed time-frequency plane. This technique is applied to the signals measured by non-contact magnetostrictive sensors. Experimental results indicate that the present method using the magnetostrictive sensor can be quite effective for accurate damage size estimation with simple measurements.

• 전기학회논문지
• /
• 제64권1호
• /
• pp.149-158
• /
• 2015

This paper proposes a subband filtering technique to the MUSIC and the ESPRIT algorithm for estimating the magnitude and frequency of the harmonics of power signal. In proposed method, the input power signal is decomposed to the odd harmonics and the even harmonics respectively by the filter bank system. The amplitude and the frequency estimation of the decomposed harmonics are carried out using the MUSIC and the ESPRIT method. Subband filtering can reduce the autocorrelation matrix size of input data, and spectrum leakage between adjacent harmonics. Therefore, this subband technique has advantage in computational cost and estimation accuracy compared to fullband MUSIC and ESPRIT. To demonstrate the performance of the method, computer simulations are performed to the synthesized input signal, and experiment results are compared in subband and fullband cases.

• 동력기계공학회지
• /
• 제5권4호
• /
• pp.61-66
• /
• 2001

Electro-Rheological(ER) fluids undergo a phase-change when subjected to an external electric field, and this phase-change typically manifests itself as a many-order-of magnitude change in the rheological behavior. This paper presents experimental results on material properties for an ER fluids of arabic gum components subjected to electrical fatigues. As a first step, ER fluids are made of arabic gum 25% of particle weight-concentration. Following the construction of test mechanism for estimated durability of ER fluid, the dynamic yield stress, shear stress and current density of the ER fluids are experimentally distilled as a function of DC electric field. The durability estimation of operated ER fluids are distilled and compared with those of unused ER fluids. In addition, the surface roughness of the employed electrode for copper and aluminum are evaluated as a function of the number of the electric-field cycles.