• 한국항공우주학회지
• /
• 제31권8호
• /
• pp.107-114
• /
• 2003

본 연구에서는 터빈 전효율의 불확도에 영향을 미치는 측정변수들의 불확도에 대한 영향을 실험의 결과로부터 분석하였다. 실험에 사용된 터빈은 축류형 3차원 단단터빈으로써 평균반경에서 반동도가 0.373이며 상온저압 상태에서 실험이 수행되었다. 입구전압력과 출구전압력에 의하여 발생되는 불확도는 전효율의 불확도에 전파되는 영향이 상당히 크게 나타나므로 상온저압시험에서는 높은 정밀도를 갖는 압력계를 사용하여야 한다. 측전변수의 불확도가 효율의 불확도에 차지하는 영향은 토오크에 의하여 발생되는 불확도가 가장 크게 나타났으며 회전수의 불확도가 가장 적었다. 토오크의 불확도 영향은 회전수의 증가에 따라 증가하는 경향이 있다. 전압력의 경우는 출그측에서의 불확도가 입구측에 비하여 영향력이 크게 나타났다.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2004년도 추계 종합학술대회 논문집
• /
• pp.333-338
• /
• 2004

오늘날 공공기관이나 은행 등 각종 범죄 예방 및 보안을 요하는 곳에서는 손쉽게 감시카메라를 발견할 수 있다. 이런 감시용 카메라는 각종 범죄를 예방하고 범죄사건을 해결하는데 결정적인 단서를 제공해 주는 중요한 역할을 한다. 하지만 멀리 떨어져 있는 사람을 촬영하였을 경우, 그 사람이 누구인지 확인하기 위해서는 원영상을 확대하여야만 하는데 영상을 확대하는 기법은 단순히 영상을 키우는 것이 중요한 것이 아니라 원영상과 가깝게 양질로 확대복원하는 것이 중요하다. 이처럼 영상의 확대복원을 위해서 보간법을 사용하는데 지금까지 나와 있는 보간법으로는 확대 배율이 크면 클수록 식별이 불가능할 정도로 영상품질이 많이 떨어지게 된다. 따라서 본 논문에서는 MPEG-4 SNHC FBA 그룹에서 표준화한 FDP(Face Definition Parameter)를 이용하여 얼굴영상의 얼굴윤곽을 벡터화하여 복원하므로써 기존의 보간법으로 복원된 영상보다도 더 좋은 품질로 복원할 수 있는 새로운 알고리즘을 제안한다.

• Wind and Structures
• /
• 제25권1호
• /
• pp.1-24
• /
• 2017

This paper presents a 1:25 multi-freedom aero-elastic model for a high lighting pole at the Zhoushan stadium. To validate the similarity characteristics of the model, a free vibration test was performed before the formal test. Beat phenomenon was found and eliminated by synthesis of vibration in the X and Y directions, and the damping ratio of the model was identified by the free decay method. The dynamic characteristics of the model were examined and compared with the real structure; the similarity results were favorable. From the test results, the major along-wind dynamic response was the first vibration component. The along-wind wind vibration coefficient was calculated by the China code and Eurocode. When the peak factor equaled 3.5, the coefficient calculated by the China code was close to the experimental result while Eurocode had a slight overestimation of the coefficient. The wind vibration coefficient during typhoon flow was analyzed, and a magnification factor was suggested in typhoon-prone areas. By analyzing the power spectrum of the dynamic cross-wind base shear force, it was found that a second-order vortex-excited resonance existed. The cross-wind response in the test was smaller than Eurocode estimation. The aerodynamic damping ratio was calculated by random decrement technique and the results showed that aerodynamic damping ratios were mostly positive at the design wind speed, which means that the wind-induced galloping phenomenon is predicted not to occur at design wind speeds.

• Journal of Microbiology and Biotechnology
• /
• 제28권11호
• /
• pp.1865-1875
• /
• 2018

Enhanced application of solid-state fermentation (SSF) in industrial production and the influence of SSF of Rhizopus K1 on glucoamylase productivity were analyzed using the flat band method. A growth model was implemented through SSF of Rhizopus K1 in this experiment, and spectrophotometric method was used to determine glucoamylase activity. Results showed that in bran and potato culture medium with 70% moisture in a loose state, ${\mu}$ of mycelium reached to $0.15h^{-1}$ after 45 h of culture in a thermostatic water bath incubator at $30^{\circ}C$. Under a low-magnification microscope, mycelial cells appeared uniform, bulky with numerous branches, and were not easily ruptured. The generated glucoamylase activity reached to 55 U/g (dry basis). This study has good utilization value for glucoamylase production by Rhizopus in SSF.

• 한국안광학회지
• /
• 제14권4호
• /
• pp.39-44
• /
• 2009

목적: 홍채학에 사용되는 소형 홍채 촬영용 광학계 설계. 방법: 소형 홍채 촬영용 광학계를 설계하기 위해 Sigma 2000 광학 설계 프로그램을 사용하였다. 결과: 마이크로 액츄에이터를 오토 포커싱에 사용하는 CCD에 적합한 홍채 촬영용 광학계를 설계하였는데, TCL이 30 mm이고, 배율이 -0.65배, 첫 번째 렌즈에서 마지막 렌즈까지의 거리가 약 8.0 mm, 경통 최대 구경 11 mm, 스톱의 유효구경이 약 1 mm인 특성을 가지는 광학계가 되었다. 또한 분해선폭은 30% MTF 값 기준으로 92 lps/mm인 특성을 보여준다. 결론: TCL이 30 mm이고, 첫 번째 렌즈에서 마지막 렌즈 까지의 거리가 약 8.0 mm, 경통 최대 구경 11 mm이고, MTF 30% 기준에서 분해능 선폭이 $5.4{\mu}m$에 이르는 광학계를 설계하여 홍채 촬영용 광학계를 소형화 할 수 있었다.

• 한국안광학회지
• /
• 제13권1호
• /
• pp.65-69
• /
• 2008

목적: Doublet 반사경을 이용한 조준사격용 도트 사이트 장치의 개발. 방법: Sigma 2000 광학 설계 프로그램으로 Singlet 반사경과 Doublet 반사경을 설계하여 비교 검토하였다. 결과: 유한광선수차 분석에서 기존 Singlet 반사경을 사용한 도트 사이트 장치에 비해 시차(parallax)가 제거된 유효 시야가 3.3배 확대되는 성능을 보인다. Doublet 반사경을 사용하는 경우 광학계의 중심 두께가 기존 Singlet 반사경을 사용한 경우보다 2배 이상 두꺼워지기 때문에 목표점이 관측자의 망막에 결상할 때 Singlet 반사경의 경우와 같이 제1면과 제3면의 곡률반경을 동일하게 할 경우에는 배율 변화가 나타난다. 이를 극복하기 위해 Doublet 반사경인 경우에는 어포칼 조건을 만족하는 것이 필요하다. 결론: 기존의 Singlet 반사경의 방식보다 시차(parallax)가 제거된 유효 시야가 3.3배 확대되는 성능을 가지는 Doublet 반사경을 이용한 조준사격용 도트 사이트 장치를 개발하였다.

• 대한한방부인과학회지
• /
• 제19권3호
• /
• pp.121-134
• /
• 2006

Purpose : Cuscuta chinensis Lam. is utilized extensively as important medicines for threatened abortion habitual abortion. However, objective data related to an embryo is not existed until now. Therefore, this study is focused to find out stability of Cuscuta chinensis Lam. about an embryo during pregnancy based on data related to stability of nerve cell and antioxydative effect by using neural cell line, PC 12 cell. Methods : Experimentation concerns cytotoxic effects and antioxydative effect through methods such as MTT ssay, western botting after abstracting an undiluted solution from domestic Cuscuta chinensis Lam. Results : 1. As a result of experimentation on MTT assay according to each magnification from Cuscuta chinensis Lam. extraction solution with different abstraction methods, cytotoxic effect is not observed to all extract except an undiluted solution which is abstracted from MeOH stiring. Also, an undiluted solution in stiring with MeOH could not confirm whether come from Cuscuta chinensis Lam. or not. 2. As a result of revelation of Bax and GSK-3${\beta}$ which is responsive to the first stage from general stress in order to observe antioxydative effects of Cuscuta chinensis Lam. revelation of Bax by Cuscuta chinensis Lam. appeared to decrease. Conclusion : Cytotoxic effects with Cuscuta chinensis Lam. about PC12 cell is not discovered and it assume that it would be anti apoptotic effect by ROS as Bax and GSK-3${\beta}$ inviable effect. In the future, this study could be used as basic data for additional research on Cuscuta chinensis Lam. and effect and stability of complicated prescriptions for keeping pregnancy.

• 한국물환경학회지
• /
• 제25권5호
• /
• pp.720-726
• /
• 2009

We investigated the most effective pre-treatment processes and LC/MS/MS condition for microcystins analysis. With a step-by-step pre-treatment, efficiencies of several established methods were compared. At the level of cell burst, sonication method was found to be the most efficient. As a mycrocystins first extraction solvent, 5% acetic acid showed the highest efficiency. An isolation and recovery rate of mycrocystins of ODS Sep-Pak $C_{18}$ cartridge was higher than HLB SPE cartridge. As a final elution solvent from cartridge, 100% MeOH had a better efficiency than others. Using a LC/MS/MS, effective analytical methods were established. C18 reverse column was used and gradient elution was performed with using acetonitrile, 0.1% formic acid as a mobile phase. We analysed to 0.8 mL/min flow rate fit to the $5{\mu}m$ particle size column and $55^{\circ}C$ housing temperature. The validity of established analytical method was evaluated that MDL as average $0.050{\pm}0.014{\mu}g/L$ and LOQ as average $0.160{\pm}0.045{\mu}g/L$ had a good sensitivity over 40 magnification rather than $2{\mu}g/L$ detection limit of HPLC.

• Journal of Acupuncture Research
• /
• 제22권6호
• /
• pp.135-140
• /
• 2005

Objectives : There have been several studies about the quality of acupuncture needle tip recently. We have investigated the condition of the tip of the acupuncture needles in the last studies. In the former studies, we discovered the metallic scuff, lumps and irregularities of the acupuncture needle tips under the microscope. But, no information was available on those foreign materials' identity. Methods : We have selected 200 needles of 1000 pieces from several companies by randomized methods. And we observed the tip of the 6 needles selected finally at ${\times}1000\;or\;{\times}3000$ magnification and analyzed the components of the metallic scuff, lumps and irregularities of the needle tips with a SEM-EDX analyser. Results : We found that the identity of the metallic scuff, lumps and irregularities of the needle tips were metallic materials and silicon. For example, A point was composed of Fe(69.78%), Cr(17.71%), Ni(8.11%), Zn(2.04%), Si(1.23%), Mn(1.12%), and B point was composed of Si(66.40%), Fe(26.76%), Cr(6.84%). Conclusion : The results of this study confirm that there is a real possibility of the remaining of metallic materials and silicon in body of patient, after acupuncture treatment. Therefore, it is necessary to intensify our efforts to make needles of good quality and to concentrate on manufacturing process of acupuncture needles completely to be free from danger in acupuncture treatment.