• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.250-250
• /
• 2011

Pulsed DC magnetron sputter 진공 웹코팅 연속증착기를 사용하여 PET 또는 PEN 기판 위에 Al2O3 가스 배리어 박막을 형성 하였다. 주사전자현미경 측정으로 표면을 분석하였고, PERMATRAN-W3/33을 사용하여 투습률 값을 결정하였다. PEN과 PET 기판위의 가스 배리어 막 모두 O2 분압이 증가 할수록 투습률이 증가하였다. O2 분압이 증가함에 따라 결정립들 사이에 크랙이 발생하여 투습률값에 영향을 미치는 것을 확인하였다. PET 보다 PEN 기판위에 증착막이 더 O2분압이 증가할수록 크랙이 증가하였다. PET 위에 SiO2, SiOC 및 SiON 박막을 증착하여 SiO2는 두께에 따른 변화를 SiOC와 SiON는 부분압의 변화에 따른 투습률값과 투과도값을 측정하였다. SiO2 박막 두께가 500 nm일 때 최소의 투습률인 6.63 g/m2/day를 얻었고, SiO2 박막 두께가 $1{\mu}m$ 일 때 투습률값이 9.46 g/m2/day로 증가하였다. 투과도값은 두께가 증가할수록 감소하는 것을 보였다. 이러한 결과는 투습률값이 두께 변화에 따른 영향보다 표면의 결정립들의 영향에 더 민감함을 알 수 있었다. 부분압이 $6.6{\times}10^{-4}Torr$일 때 SiOC와 SiON의 최소의 투습률이 각각 7.85 g/m2/day 이고 8.1 g/m2/day 이며 SiOC 박막의 투습률 보다 작았다.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.159-164
• /
• 2007

Thin films of platinum were deposited on a $Al_{2}O_{3}/ONO(SiO_{2}-Si_{3}N_{4}-SiO_{2})/Si$-substrate with an 2-inch Pt(99.99 %) target at room temperature for 20, 30 and 60 min by DC magnetron sputtering, respectively X-ray diffract meter (XRD) was used to analyze the crystallanity of the thin films and field emission scanning electron microscopy (FE-SEM) was employed for the investigation on crystal growth. The densification and the grain growth of the sputtered films have a considerable effect on sputtering time and annealing temperatures. The resistance of the Pt thin films was decreased with increasing deposition time and sintering temperature. Pt micro heater thin film deposited for 60 min by DC magnetron sputtering on an $Al_{2}O_{3}$/ONO-Si substrate and annealed at $600^{\circ}C$ for 1 h in air is found to be a most suitable micro heater with a generation capacity of $350^{\circ}C$ temperature and 645 mW power at 5.0 V input voltage. Adherence of Pt thin film and $Al_{2}O_{3}$ substrate was also found excellent. This characteristic is in good agreement with the uniform densification and good crystallanity of the Pt film. Efforts are on progress to find the parameters further reduce the power consumption and the results will be presented as soon as possible.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.9
• /
• pp.798-807
• /
• 2002

ZnO thin films on Si wafer were deposited by RF magnetron reactive sputter with various RF power, chamber pressure, argon/oxygen gas ratios ana substrate temperatures. Crystallinities, surface morphologies, and electrical properties of the films were investigated by XRD, AFM, RBS, and electrometer(keithley 617). ZnO films showed a strong c-axis preferred orientation. Surface roughness and resistivity were changed by the argon/oxygen gas ratio. The minimum surface roughness of 12${\AA}$ and maximum resistivity of $10^8\Omega cm$ were achieved at Ar/O$O_2$=0/100.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1572-1573
• /
• 2007

RF magnetron 스퍼터에서 스퍼터링시 타겟 온도와 기판 온도가 증가함에 따라 chamber내부의 압력이 달라져 동일한 순도의 박막을 얻기가 힘들다. 본 연구에서는 gas량을 조절하는 MFC의 출력 전압을 PID 제어 시스템을 설계하여 기준전압(원하는 진공도에 해당하는 전압 값)과 진공게이지에서 출력되는 전압을 비교하여 MFC의 출력 전압을 증가 또는 감소시킴으로써 gas량을 일정하게 하여 chamber 내부의 압력이 일정하게 유지되도록 하였다.

• Journal of the Korean institute of surface engineering
• /
• v.25 no.5
• /
• pp.223-233
• /
• 1992

(Ti, Al)N films were deposited on 304 stainless steel by D.C. magnetron sputtering using Al target and Ti plate. The properties of (Ti, Al)N films such as composition, microhardness, grain size, crystal structure were investigated. The chemical composition of (Ti, Al)N films was similar to the sputter area ratio of titanium to aluminum target by means of EDS and AES survey. The higher bias voltage to substrate and the smaller input of N2 gas showedthe increased microhardness and the finer grain size of the films. The results obtained from this study show, it is belived, that the (Ti, Al)N film by D.C.magne-tron sputtering is promising in the wear resistance use.

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.661-668
• /
• 2002

A study was made to examine the electrical, compositional, structural and morphological properties of Ag thin films deposited by DC magnetron sputtering in $O_2$ atmosphere with deposition temperature from room temperature to 15$0^{\circ}C$ using in-line sputter system. The Ag films deposited at temperature above $100^{\circ}C$ in oxygen atmosphere gave a similar specific resistivity to and even lower oxygen content than those deposited using pure Ar sputter gas The Ag films deposited with pure Ar gas was mainly composed of crystallites with [111] preferred orientation, while, for those deposited in oxygen atmosphere, more than 50% of the volume was composed of crystallites with [100] orientation. The difference in the micro structure did not cause any difference in the specific resistivity of Ag films. The results showed that the transparent conducting oxide films and the Ag films could be processed sequentially in the same deposition chamber with careful control of deposition temperature, which might result in a cost reduction for constructing the large scale in-line deposition system.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.10a
• /
• pp.34.2-34.2
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2006.05a
• /
• pp.23.1-23.1
• /
• 2006

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.15-19
• /
• 2003

In This paper, we developed 1.96 GHz air gap type FBAR BPF using ZnO as piezoelectric sputtered by RF magnetron at room temperature. FBAR BPF was fabricated by sputtering bottom electrode (Al), ZnO as piezoelectric and top electrode (Mo) on Si wafer one by one with RF magnetron sputter, then Si was dry etched to make an air hole. XRD test result of fabricated FBAR BPF showed that ZnO crystal was well pre-oriented as (002) and sigma value of XRC was 1.018. IL(Insertion loss) showed excellent result as 1 dB.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.1-6
• /
• 2012

In this study, a high performance rotary magnet type magnetron source for roll-to-roll sputter system has been developed. We analyzed the density of magnetic field as a function of size variation of the magnet which are in the center and edge of the target. The target efficiency showed the best result when the width of center magnet, the width of edge magnet, the angle of edge magnet, and the rotation angle of Yoke are 20mm, 10mm, $56^{\circ}$, and $16^{\circ}$, respectively. On the basis of the results of magnet array, Roll-to Roll magnetron source was fabricated and tested. The uniformity of the film thickness and that of the sheet resistance was ${\pm}1.62%$ and ${\pm}4.13%$, and the resistivity was $2.79{\times}10^{-3}W{\cdot}cm$.