• Economic and Environmental Geology
• /
• v.32 no.2
• /
• pp.161-167
• /
• 1999

Electric and electromagnetic surveys were conducted to investigate the deep structure of the Ulsan fault in Ipsil area, south of Kyeongju. On this study, especially high-frequency magnetotelluric method of electromagnetic survey in the frequency range of 10~100,000 Hz was mainly employed to study the deep subsurface configuration. High-frequency MT survey was performed at 70 points of spacing 30~50 m, making 3.8 km survey line. As a survey result, a 2-km-depth 2-D cross-section was achieved. It shows vertical and horizontal subsurface variations of resistivity values. Near-surface layer having low resistivity value becomes thicker eastward up to 800m. There is a steep low resistivity zone in the west side of survey line, and there exists two low resistivity zones dipping west in the east side of survey line. Two low resistivity zones are interpreted to be related to major movement pattern of the Ulsan fault. This suggests that major fault lines are developed on both peripheral sides of the broad fault zone.

• Economic and Environmental Geology
• /
• v.33 no.4
• /
• pp.283-293
• /
• 2000

A set of geophysical survey results over an area in Bookil-myun, Chungwon-Gun, Chungcheongbuk-Do is presented; resistivity logging, d.c. sounding, dipole-dipole resistivity, and controlled-source magnetotelluric (CSMT) surveys. These surveys were chosen in this research for the estimation of the basement depth and the delineation of the hydrogeologic structure over the survey area. The results provide an optimal input to a hydrogeologic modeling analysis using the strategies built in GIS software. A total of 14 lines of dipole-dipole resistivity surveys, 25 stations of d.c. sounding and 6 stations of CSMT sounding were performed. In addition 10 boreholes were chosen for resistivity logging to correlate the logs to the surface data. A quantitative information on the hydrogeologic structure over the area is provided by synthesizing the results from various geophysical data and attribute layers are constructed by utilizing a GIS software Arc/ Info. The constructed layers match well to the hydrogeologic structures, which were outlined from the drilling data. The methodology tested and adopted in this study would be useful for providing a more reliable input to the hydrogeologic model setup.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2007.06a
• /
• pp.273-278
• /
• 2007

2-D MT surveys at the Century mine in Australia have been performed with very far remote reference in Esashi, Japan as well as Gregory Downs, which are roughly 6400 km and 80 km apart from the field site, respectively. Long period pulsations observed in this survey generally showed dominant $H_x$ polarization than $H_y$; $H_x$ component is more than 3 times stronger than $H_y$ component. Polarity reversal in magnetic field pointing east ($H_y$ component) has also been observed in long period pulsations, while $H_x$ component remain coherent between the hemispheres. Though $H_x$ component shows relatively good coherency than $H_y$ component between the hemispheres at frequencies lower than 0.01 Hz, it seems rather too far to be used as a remote reference for ordinary MT frequency band.

• Journal of the Korean earth science society
• /
• v.28 no.1
• /
• pp.64-74
• /
• 2007

The marine seismic prospecting using a research vessel in the shallow sea near the coastal area has certain limits according to the water depth and survey environment. Also, for the electrical resistivity survey at seashore area, one may need a specially designed high-voltage source to penetrate the very conductive surface layer. Therefore, we have conducted a feasibility study on the application of magnetotelluric method (MT), a passive geophysical method, on investigating of shallow marine environment geology. Our study involves both theoretical modeling and field survey at the tidal flat area which represent the very shallow marine environment. We have applied the audio-frequency magnetotelluric (AMT) method to the intertidal deposits of Gunhung Bay, west coast of Korea, and analysed the field data both qualitatively and quantitatively to investigate the morphology and sedimentary stratigraphy of the tidal flat. The inversion of AMT data well reveals the upper sedimentary layer of Holocene intertidal sediments having a range of 13-20 m thickness and the erosional patterns at the unconformable contact boundary. However, the AMT inversion results tend to overestimate the depth of basement (30-50 m) when compared with the seismic section (27-33 m). Since MT responses are not significantly sensitive to the resistivity of middle layer or the depth of basement, the AMT inversion result for basement may have to be adjusted using the comparison with other geophysical information like seismic section or logging data if possible. But, the AMT method can be an effective alternative choice for investigating the seashore area to get important basic informations such as the depositional environment of the tidal flat, sea-water intrusion and the basement structure near the sea shore.

• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.318-325
• /
• 2008

Assigning an exact boundary condition is of great importance in three-dimensional (3D) magnetotelluric (MT) modeling, in which no source is considered in a computing domain. This paper presents a 3D MT modeling algorithm utilizing a Dirichlet condition for a 2D host. To compute boundary values for a model with a 2D host, we need to conduct additional 2D MT modeling. The 2D modeling consists of transverse magnetic and electric modes, which are determined from the relationship between the polarization of plane wave and the strike direction of the 2D structure. Since the 3D MT modeling algorithm solves Maxwell's equations for electric fields using the finite difference method with a staggered grid that defines electric fields along cell edges, electric fields are calculated at the same place in the 2D modeling. The algorithm developed in this study can produce reliable MT responses for a 3D model with a 2D host.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.121.2-121.2
• /
• 2010

제주도는 지질학적으로 제4기에 형성된 화산섬으로 지금까지 고온의 지열징후는 보고된 바 없으나, 남한에서 가장 최근까지 화산활동이 있었던 것으로 기록되어 있어 화산활동과 관련된 심부 지열자원 부존 가능성은 아직 열려있다고 할 수 있다. 본 연구에서는 제주도에서 지열부존 가능성을 타진하고 제주도 심부 지질구조 파악을 목적으로 2차원 및 3차원 자기지전류 (MT) 탐사를 수행하였다. 탐사는 중산간지역에서 한라산을 중심으로 동, 서, 남, 북의 4방향 4측선과 제주 서부지역에 남북방향의 1측선을의 총 5개 측선에 대해 수행하였으며, 이에 대한 MT 탐사자료의 2차원 및 3차원 역산을 통하여 한라산 하부 및 주변의 심부 지질구조를 파악하고자 하였다. 역산 해석 결과는 천부 구조는 기존 시추조사 결과 밝혀진 층서구조의 형태를 잘 나타내어 획득된 자료의 신뢰도가 높음을 지시하였다. 즉, 제주도 최 상부를 피복하고 있는 현무암 등의 화산암류는 고비저항(수백 ohm-m)으로, 그 하부의 해성 미고결퇴적층(U층 및 서귀포층)은 저비저항으로, 그리고 최하부의 응회암이나 화강암으로 구성된 기반암은 1,000 ohm-m 이상의 고비저항 층으로 잘 구분되어 나타났다. 특히, 제주도에서 특징적으로 해수면 하부 수십 ~ 수백 m에 존재하는 것으로 알려진 미고결퇴적층이 10 ohm-m 내외로 측선 전반에 걸쳐 나타났다. 이는 기존의 시추결과에서 미고결 퇴적층이 제주도 전역에 걸쳐 해수면 하부 100 m 내외의 심도에서 관찰되는 것과 일치하는 결과이다. 기반암 하부에서는 특징적으로 모든 측선의 중앙부에서 저비저항 이상대가 영상화되었으며 이는 2차원 역산과 3차원 역산해석에서 공통적으로 나타났다. 특히, 3차원 해석에서는 이러한 저비저항 이상대가 한라산 정상에서 서북쪽 부근에 나타나는데 이는 과거의 화산활동과 관련된 지질학적인 구조에 의한 영향일 가능성과 측선의 양단과 중앙에서 주변 바다의 영향이 다르게 나타나기 때문일 가능성으로 볼 수 있다. 즉, 전자는 심부에 발단된 각각의 파쇄대가 모든 측선의 중앙부에서 교차하거나 이를 통한 한라산의 생성과정과 연관된 지질학적인 구조일 가능성을 의미한다. 만약 한라산을 형성한 화성활동의 영향이 아직 지하 심부에 남아있다면 지열수의 부존 혹은 마그마의 통로가 되었을 단층의 영향으로 한라산 하부에 저비저항 이상대로 나타날 가능성이 높다. 그러나 후자에 의한 가능성도 배제할 수는 없으므로 향후 주변바다에 대한 영향을 고려한 3차원 역산해석이나 심부시추 등을 통한 상세한 지질조사 등 추가적인 연구가 이루어져야 할 것으로 판단된다.

• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.230-242
• /
• 2020

We performed a magnetotelluric (MT) survey to delineate the geological structures below the depth of 20 km in the Gyeongju area where an earthquake with a magnitude of 5.8 occurred in September 2016. The measured MT data were severely distorted by electrical noise caused by subways, power lines, factories, houses, and farmlands, and by vehicle noise from passing trains and large trucks. Using machine-learning methods, we classified the MT time series data obtained near the railway and highway into two groups according to the inclusion of traffic noise. We applied three schemes, stochastic gradient descent, support vector machine, and random forest, to the time series data for the highspeed train noise. We formulated three datasets, Hx, Hy, and Hx & Hy, for the time series data of the large truck noise and applied the random forest method to each dataset. To evaluate the effect of removing the traffic noise, we compared the time series data, amplitude spectra, and apparent resistivity curves before and after removing the traffic noise from the time series data. We also examined the frequency range affected by traffic noise and whether artifact noise occurred during the traffic noise removal process as a result of the residual difference.

• Geophysics and Geophysical Exploration
• /
• v.14 no.2
• /
• pp.164-175
• /
• 2011

Using natural electromagnetic (EM) fields at low frequencies, magnetotelluric (MT) surveys can investigate conductivity structures of the deep subsurface and thus are used to explore geothermal energy resources and investigate proper sites for not only geological $CO_2$ sequestration but also enhanced geothermal system (EGS). Moreover, marine MT data can be used for better interpretation of marine controlled-source EM data. In the interpretation of MT data, MT modeling schemes are important. This study improves a three dimensional (3D) MT modeling algorithm which uses edge finite elements. The algorithm computes magnetic fields by solving an integral form of Faraday's law of induction based on a finite difference (FD) strategy. However, the FD strategy limits the algorithm in computing vertical magnetic fields for a topographic model. The improved algorithm solves the differential form of Faraday's law of induction by making derivatives of electric fields, which are represented as a sum of basis functions multiplied by corresponding weightings. In numerical tests, vertical magnetic fields for topographic models using the improved algorithm overcome the limitation of the old algorithm. This study recomputes induction vectors and tippers for a 3D hill and valley model which were used for computation of the responses using the old algorithm.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.602-612
• /
• 2011

Jeju Island, a volcanic island located in South Korea, has been one of the main targets of geophysical and/or geological studies because of its tectonic importance related to the volcanism and tectonic link to the southern part of the Korean Peninsula. Recently, as a number of broad-band magnetotelluric (MT) measurements were made, we have examined the deep part of the island. In such an insular setting, it is not easy to properly recover the deep structures such as the lower crust and the upper crust using MT data, because their low-frequency components are strongly affected by the surrounding sea of the island. In this study, we apply the sea-effect correction to the existing MT data collected at a total of 102 sites in Jeju Island. The sea-effect correction makes remarkable changes in the observed MT data at frequencies below 1 Hz, clearly indicating the existence of a conductive lower crust. The 2-D inversion results for both Jeju Southern Line (JSL) and Jeju Northern Line (JNL) show that the transition zone separating the resistive upper crust and conductive lower crust exists at a depth of 20 km on average.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.136-147
• /
• 2004

In this study, the characteristics of magnetotelluric (MT) responses due to a three-dimensional (3-D) body are analyzed with 3-D numerical modeling. The first model for the analysis consists of a single isolated conductive body embedded in a resistive homogeneous half-space. The second model has an additional conductive overburden while the other conditions remain the same as the first one. The analysis of apparent resistivities shows well that the 3-D effects are dominant over some frequency range for the first model. Two mechanisms, current channeling and induction, for secondary electric fields due to the conductive body are analyzed at various frequencies: at high frequencies induction is more dominant than channeling, while at low frequencies channeling is more dominant than induction. Tippers have a strong relation to the position of anomalous body and the real and imaginary parts of induction vector also indicate the position of anomalous body. off-line conductive anomaly sometimes causes severe problem in 2-D interpretation. In such case, induction vector analysis can give information on the existence and location of the anomalous body. Each parameter of the second model shows similar responses as those of the first model. The only difference is that the magnitude of all parameters is decreased and that the domain showing the 3-D effects becomes narrower. As shown in this study, the analysis of 3-D effects provides a useful and effective means to understand the 3-D subsurface structure and to interpret MT survey data.