• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.67-75
• /
• 2005

For th aim of lightweight microwave absorbers, conductive and magnetic microspheres are fabricated by plating of Co films on hollow ceramic microspheres of low density. Metal plating was carried out in a two-step electroless plating process (pre-treatment of activation and plating). Uniform coating of the film with about $2{\~}3{\cal}um$ thickness was identified by SEM. High-frequency magnetic and microwave absorbing properties were determined in the rubber composites containing the Co-coated microspheres. Due to conductive and ferromagnetic behavior of the Co thin films, high dielectric constant and magnetic loss can be obtained in the microwave frequencies. Due to those electromagnetic properties, high absorption rate (25 dB) and thin matching thickness ($2.0{\~}2.5{\cal}mm$) are predicted in the composite layers containing the metal-coated microspheres of low density (about 0.84 g/cc) for the electromagnetic radiation in microwave frequencies.

• Journal of the Korean Magnetic Resonance Society
• /
• v.6 no.1
• /
• pp.69-77
• /
• 2002

During the screening of material which has the antimicrobial activity against aminoglycoside-resistant bacteria, A new material $\varepsilon$-(L-$\beta$-Iysine) polypeptide from a culture medium of Streptomyces sp.(DWGS2) was isolated, and the structure and the physicochemical properties of the new material were elucidated. The new material was separated by column chromatography of the culture medium using Dowex1$\times$2, Silica gel, and Sephadex LH20 etc. The chemical structure and molecular weight were determined with the data of various NMR experiments, MALDI mass, and ESI mass experiments. The antimicrobial activity of $\varepsilon$-(L-$\beta$-Iysine) polypeptide is not only better than equal to the activity of known aminoglycoside type of antibiotics(MIC=3.125 - 6.25ug/mL) but also effective against aminoglycoside-resistant bacteria and fungi. If the mechanism of antimicrobial activity against aminoglycoside- resistant bacteria is figured out, the $\varepsilon$-(L-$\beta$-Iysine) polypeptide can be utilized for the treatment of diseases caused by aminoglycoside-resistant bacteria.

• Journal of the Korean Magnetic Resonance Society
• /
• v.11 no.2
• /
• pp.129-137
• /
• 2007

During the screening of material which has the antimicrobial activity against aminoglycoside-resistant bacteria, A new material ${\varepsilon}-(L-{\beta}-lysine)$ polypeptide from a culture medium of Streptomyces sp.(DWGS2) was isolated, and the structure and the physicochemical properties of the new material were elucidated. The new material was separated by column chromatography of the culture medium using Dowex $1{\times}2$, Silica gel, and Sephadex LH20 etc. The structure and molecular weight were determined with the data of NMR, MALDI mass, and ESI mass experiments. And the monomer obtained by hydrolysis of the new material with 6N-HCI was identified as a $L-{\beta}-lysine(T_2)$, which is a tail of bleomycin. As tail-region analogy, $T_2({\beta}-lysine$ derivatives from streptomyces) interactions with a self-complementary oligonucleotides, $d(CGCTTCGAAGCG)_2$, was investigated by NMR.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.5
• /
• pp.767-772
• /
• 2012

Generally, abrasive fluid jet polishing system has been used for polishing of complex shape or freeform surface which has steep local slopes. In the system, abrasive fluid jet is injected through a nozzle at high pressure; however, it is inevitable to lose its coherence as the jet exits a nozzle. This problem causes incorrect polishing results because of unstable and unpredictable workpiece material removal at the impact zone. In order to solve this problem, MR fluid jet polishing method has been developed using a mixture of abrasive and MR fluid which can maintain highly collimated and coherent jet by applied magnetic field. Thus, in this study, an injection nozzle and an electromagnetic module, most important parts in the MR polishing system, were designed and verified by magnetic field and flow analysis. As the results of experiments, it can be confirmed that stable fluid jets for polishing were generated since smooth W-shapes and uniform spot size were observed regardless of standoff distance changes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.1-1
• /
• 2011

We developed a new generalized synthetic procedure, called as "heat-up process," to produce uniform-sized nanocrystals of many transition metals and oxides without a size selection process. We were able to synthesize uniform magnetite nanocrystals as much as 1 kilogram-scale from the thermolysis of Fe-oleate complex. Clever combination of different nanoscale materials will lead to the development of multifunctional nano-biomedical platforms for simultaneous targeted delivery, fast diagnosis, and efficient therapy. In this presentation, I would like to present some of our group's recent results on the designed fabrication of multifunctional nanostructured materials based on uniform-sized magnetite nanoparticles and their medical applications. Uniform ultrasmall iron oxide nanoparticles of <3 nm were synthesized by thermal decomposition of iron-oleate complex in the presence of oleyl alcohol. These ultrasmall iron oxide nanoparticles exhibited good T1 contrast effect. In in vivo T1 weighted blood pool magnetic resonance imaging (MRI), iron oxide nanoparticles showed longer circulation time than commercial gadolinium complex, enabling high resolution imaging. We used 80 nm-sized ferrimagnetic iron oxide nanocrystals for T2 MRI contrast agent for tracking transplanted pancreatic islet cells and single-cell MR imaging. We reported on the fabrication of monodisperse magnetite nanoparticles immobilized with uniform pore-sized mesoporous silica spheres for simultaneous MRI, fluorescence imaging, and drug delivery. We synthesized hollow magnetite nanocapsules and used them for both the MRI contrast agent and magnetic guided drug delivery vehicle.

• Journal of the Korean Magnetic Resonance Society
• /
• v.6 no.2
• /
• pp.84-88
• /
• 2002

Dating and dosimetry using electron spin resonance (ESR) in 20th Century developed at both Yamaguchi University and Osaka University have been reviewed with emphasis on new prospects and strategies in 21th century. Natural radiation have been generating radicals that accumulated in archaeological and geological materials. ESR detects these radicals and the ESR signal intensity is proportional to the radiation dose and therefore the age. The assessment of the total dose of natural radiation and the annual dose rate give their ESR ages. The ESR dating of stalactites and stalagmites ant Akiyoshi cave in Yamaguchi prefecture in 1975 was extended to anthropological dating using bones and tooth enamel excavated in Greek Petralona cave. Fossils of shells and corals gave the ages of marine terraces and sea-level changes. Quartz grains gave the ages of geothermal alteration and fault movements. Future ESR dating of ices at outer planets anf their satellite are also investigated as basic studies for ices od $H_2O,\;CO_2,\;SO_2$ as well as terrestrial hydrates in laboratory. Atomic bomb radiation dosimetry at Hiroshima and Nagasaki using ESR lead to the dosimetry of personnel, Chemobyl and JCO criticality accidents. Monitoring of radiation dose with sensitive materials with tissue equivalence are being developed. finally a new scanning ESR imaging apparatus (a near field microwave microscope) developed in our laboratory gave ESR images of Radicals from fossils to Si-CVD and diamond films as summarized in my book in 2002.

• Journal of Applied Biological Chemistry
• /
• v.53 no.2
• /
• pp.77-81
• /
• 2010

The seed of cowpea (Vigna sinensis K.) was extracted with 80% aqueous methanol (MeOH). And the concentrated extract was partitioned with ethyl acetate (EtOAc), n-butanol (n-BuOH) and $H_2O$, successively. The repeated silica gel and octadecyl silica gel (ODS) column chromatographic separations for the EtOAc and n-BuOH fractions led to isolation of four sterols. And the chemical structures of the compounds were determined as a mixture of stigmasterol and $\beta$-sitosterol with the ratio of 4 to 3 (1), 7-ketositosterol (2), and stigmasterol 3-O-$\beta$D-glucopyranoside (3) from the interpretation of spectroscopic data including nuclear magnetic resonance (NMR) spectrum metric, mass (MS) spectrum metric and infrared (IR) spectroscope. This study reports the first isolation of $\beta$-sitosterol, 7-ketositosterol, and stigmasterol 3-O-$\beta$-D-glucopyranoside from the seed of Vigna sinensis K. In addition, compound 2, 7-ketositosterol, is rarely occurred in natural source including plant.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.103-103
• /
• 2003

대기나 물에 용해된 여러 가지 유해한 유기물을 분해하기 위한 방안으로서 다양한 광촉매 재료를 이용하려는 시도가 진행되고 있다. 하지만 광촉매 반응은, 현탁액 내에서 submicrometer 크기를 갖는 반도체재료에서 발생하므로 처리된 폐수로부터 촉매를 제거해야 하는 정제공정 (downstream process)이 필요하며, 이는 경제적인 측면에서 큰 경비를 요구하게 된다. 이를 해결 하기 위하여, 가장 우수한 광촉매 재료로 평가받는 TiO$_2$를 glass beads, sands, silica gel등의 물질에 고정시키거나, TiO$_2$를 자성 입자에 코팅시킨 형태인, 자성 광촉매입자를 응용하려는 연구가 최근 활발하게 진행되고 있다. 따라서 본 연구에서는 광촉매의 고정화와 재활용 효율을 향상시키기 위하여 TiO$_2$ 나노입자를 y-Fe$_2$O$_3$ 나노입자의 표면에 코팅하여 나노입자의 큰 비표면적을 활용하고 미세구조를 제어하여 입자간의 고정특성과 자기적 특성의 제어기술을 확립하고자 하였다.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3274-3280
• /
• 2011

Monodispersed porous NiO and $Co_3O_4$ microcapsules with a hollow core were synthesized using SBA-16 silica sol and PS as a hard template. The porous hollow microcapsules were characterized by XRD, TEM and $N_2$ adsorption/desorption analysis. After $H_2$ reduction of metal oxide microspheres, they were conducted as an active catalyst in the reduction of chiral butylronitrile and cyanobenzene. The mesoporous metals having a hollow structure showed a higher activity than a nonporous metal powder and an impregnated metal on the carbon support.

• Journal of the Korean Chemical Society
• /
• v.32 no.2
• /
• pp.149-155
• /
• 1988

Pentasil zeolites, including ZSM-5, ZSM-8, ZSM-11 and silicalites, were synthesized using various organic cations. Synthesis run was carried out in a Parr pressure reactor of $2{\ell}$ capacity and a self-constructed reactor with a magnetic stirring system. The reactant materials used are colloidal silica (Snowtex), sodium aluminate, sodium chloride, TEA, TPA, TBA, Choline and water. The composition of starting materials and the reaction temperature were found to be important factors for the synthesis of uniform pentasil zeolites.