• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.652-659
• /
• 2012

직사각형 슬릿 개구를 갖는 금속 함체에 수직, 수평 편파를 입사하여 차폐 효과를 연구하였다. 직사각형 슬릿개구의 magnetic polarizability와 금속 함체의 공진 모드를 이론적으로 분석하였고, 이를 바탕으로 시뮬레이션 결과와 측정 결과를 비교 분석하였다. 또한, 함체 내부 프로브의 위치에 따른 차폐 효과 의존성도 분석하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.124-125
• /
• 2017

In this study, the shielding effectiveness of the Zn-Al arc thermal metal film coated cement-mortar mixed with copper powder by reflection, absorption, multi-reflection loss in 2.25~2.65 GHz was reviewed. By enhancing the mixing ratio of copper powder, the shielding effectiveness by absorption and multi-reflection loss was increased, but shielding rate(%) based on 80 dB showed below 20%. The Zn-Al arc thermal metal film coated on specimen, the shielding rate increased 3.5 times by reflection loss.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권1호
• /
• pp.40-43
• /
• 2015

Wireless power transfer technology is using the magnetic resonance recently drawing increased attention. It uses the resonance between transmitter and receiver coils to transfer power. Thus, it can improve the transfer distance and efficiency compared with the existing magnetic induction technique. The authors found from the previous study that the application of the superconductor coil to the magnetic resonance wireless power transfer system improved its efficiency. Its application to real life, however, requires the additional study on the effects of adjacent materials. In this study, the two resonance coils made by superconductor coils were used to aluminum and plastic shielding materials was placed between the coils. S-parameters were analyzed according to the position of the shielding material between the transmitter and receiver coils. As a result, the plastic of shielding material had no effect, but the aluminum of shielding material affected the wireless power transfer due to the shielding effectiveness.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1121-1128
• /
• 2011

The HEMP has very short rising time with several tens of kV/m, and very dangerous to almost of the electronics. And the certain level of EMP shielding effectiveness is necessary for mos t of the systems andequipment. In EMP shielding effectiveness, the peak value and the rising time in the system are the most considerable parameters. In order to find out these parameters, we need to estimate the pulse shape in time domain. In this paper, we propose the methods to estimate the penetrated pulse in time domain using measured shielding effectiveness and digital filter modeling technique. The validity of the Digital filter modeling technique is verified by the HFSS.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.81-86
• /
• 2015

This study investigated electromagnetic interference (EMI) shielding effectiveness (SE) of hybrid conductive fabrics. The coaxial transmission line method was used to measure the EMI Shielding effectiveness of the conductive fabrics. We designed and constructed a measuring system, consisting of a network analyzer and a device that serves as a sample holder and at the same time as a transmission medium of incident electromagnetic waves. The measurements of SE were carried out in a frequency range from 100 MHz to 2 GHz. The results of the EMI shielding experiments showed that the maximum electromagnetic shielding effectiveness (EMSE) values of sandwich type C/A/C (carbon fiber sheet/aluminum foil tape/carbon fiber sheet) and C/Ni/C (carbon fiber sheet/magnetic shielding foil/carbon fiber sheet) samples were 55 dB and 113 dB, respectively, at a frequency of 1.9 GHz.

• 한국전자파학회지:전자파기술
• /
• 제2권3호
• /
• pp.17-25
• /
• 1991

자기부상열차 시스템에서의 자속 누설은 주로 부상용 전자석과 리니어 모터, 안내용 전자석으로 부터 발생하 여 intra - system 및 inter - system EMI 현상과 biological effect을 야기할 수 있다. 본 논문에서는 누설 자속의 크기에 영향을 주는 각종 요소들을 고려하여 열차 주위에 분포하는 자기장의 세기를 계산하였으며, 여기서 얻어진 결과를 이용하여 차제 바닥과 측면에 사용되는 구조물의 재질과 위치에 따른 최소 두께를 계산하여 자기장 차폐를 위해 차체 무게가 증대되는 것을 최소로 할 수 있는 방법을 제시하였다. 이 결과를 한국해사기술연구소에서 설계제작한 2인승 자기부상열차 모형에 적용하여 열차 모형 주위의 자속 밀도에 대한 등자위선을 구하고, 이때의 최소 차폐 두께를 제시함으로써 차폐 재료의 무게에 대해 50% 이상의 감량이 가능하였다.

• 한국인터넷방송통신학회논문지
• /
• 제19권2호
• /
• pp.59-65
• /
• 2019

노이즈 소스의 근거리장에 저전도율 차폐막이 놓여있을 때 차폐막 두께에 따른 EMI 차폐효과를 분석하였다. 노이즈 소스로는 광대역 특성을 갖는 나선형 안테나를 이용하였으며, 저전도율 차폐 재료로는 그래파이트를 선정하였다. 나선형 안테나 두 개를 만들어 두 안테나 사이의 투과계수를 분석하였고, 송수신 안테나 사이의 거리는 5 cm와 10 cm인 두 경우에 대해 수행하였다. 차폐막의 두께는 1 um에서 200 um까지 변화시켰다. 주파수는 100 MHz에서 6 GHz까지 변화시켜 최대 70 dB의 SE(Shielding Effectiveness)를 얻었다. 본 시뮬레이션에서는 차폐막 재료인 그래파이트의 특성상 전기적 차폐(electronic shielding)를 이용하였다. 이 결과를 바탕으로 향후 자기 차폐를 구현하여 차폐 성능을 향상시킬 수 있는 방법을 연구할 예정이다.

• Macromolecular Research
• /
• 제10권6호
• /
• pp.345-358
• /
• 2002

The electrical conductivity during vulcanization process was measured as a function of time for the system of TiC loaded styrene-butadiene rubber (SBR) composites. The phenomenon of negative and positive temperature coefficients of conductivity and its conduction mechanism were also studied for the SBR polymeric composites. The current-voltage characteristics of the polymeric composites were non-linear in high voltage and showed a switching effect. The effects of temperature on the thermal conductivity and effective dielectric constant were measured. The measured parameters were found to be dependent on TiC concentration. The electromagnetic wave shielding (EMS) of the SBR-TiC polymeric composite was also examined. The SBR filled with TiC could be expected to be promising novel smart polymeric composites for self-electrical heating, temperature sensor, time delay switching, and electro-magnetic wave shielding effectiveness.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.770-775
• /
• 2014

According to ICNIRP guidelines for limiting exposure to time-varying electric, magnetic and electromagnetic fields up to 300GHz, magnetic flux density which range from 3Hz to 150kHz are regulated to lower than $6.25{\mu}T$. In order to comply with its standard, OLEV(On-Line Electric Vehicle) have been designed considering EMF(Electro-Magnetic Field) reduction. However, if a current flowing in power line would be bigger for increasing power transfer efficiency, the established shield system no longer acts their role properly. In this paper, therefore, FCCL(Flexible Copper Clad Laminate) is applied to power line and pick-up devices to solve the problems. Though, the FCCL is normally utilized to insulator on circuit board, because of its high heat resistance characteristic, flexibility and thin properties, it makes effectiveness in the shielding device as well. 4 types of FCCL shielding structure are introduced to power line and pick-up devices. From the results, the FCCL which are placed in proposed positions shows maximum EMF reduction compared to the established shielding structure. Henceforth, if OLEV is applied FCCL shielding structure in practice, it will not only be more safe but also step forward to commercialization near future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.551-552
• /
• 2011

In this study new evaluation method of eddy currents in conductive shielding sheets are introduced. This method is based on the magnetic flux linkage in rectangular cells. According to this method the allocated amount of memory and the calculation time can be reduced. In this method calculation of magnetic field in any space can be performed by summing contributions of source currents and eddy currents in conductive shielding sheets. This method is applicable to the design of magnetic field-shield.