• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.6
• /
• pp.524-530
• /
• 2008

The spin valve tunneling magnetoresistance (SV-TMR) sensor performance is analyzed using Stoner-Wohlfarth model for the detection of eddy current signals in nondestructive testing applications. The SV-TMR response in terms of the applied AC magnetic field dominantly generates the second harmonic amplitude in hard axis direction. The second harmonic eddy current signal detection using SV-TMR sensor shows higher performance than that of the coil sensor at lower frequencies. The SV-TMR sensor with high sensitivity gives a good solution to improve the low frequency performance in comparison with the inductive coil sensors. Therefore, the low frequency eddy current techniques based on SV-TMR sensors are specially useful in the detection of hidden defects, and it can be applied to detect the deeply embedded flaws or discontinuities in the conductive materials.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2588-2590
• /
• 2005

This paper presents an three dimension attitude of inertial navigation system(INS) for managing a transporter in shipyard by using low-cost inertial sensors. The GPS(Global Positioning System) shade field prevents from receiving information of position through GPS satellites, GIS(Geographic Information System) in shipyard, therefore TNS system plays an important part. This system is composed of tiny low-cost gyroscopes, accelerometers and a magnetic compass, and 3-dimension position is estimated by an indirect Kalman filter using the outputs of these inertial sensors.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.5
• /
• pp.394-401
• /
• 2004

This paper presents a study on the analysis of impact responses taking into account sensor dynamics. The contact force between impacting bodies is modelled by using Hertz force-displacement law and linear damping function. Since the real impact force and acceleration at the contact surface of two colliding bodies are measured indirectly by the sensors, the measured outputs can be a little different from the real impact responses. Therefore, in this study, the importance of consideration of sensor dynamics in the impact problems of two colliding bodies is emphasized. In order to verify the appropriateness of the proposed contact force model, the drop type impact test using two kinds of sensors is carried out. Through the numerical analysis and experiment, the effect of sensor dynamics and characteristics on the contact force model is investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.365-370
• /
• 2001

The purpose of this work is to suggest a new non-contact measurement method applicable to the diagnosis of rotating shafts. Longitudinal elastic waves propagating along the shafts are measured by magnetostrictive sensors that make use of the coupling phenomena between strains and magnetic induction in ferromagnetic shafts. These sensors have been successfully applied in pipes and others, but it appears that the present application of them to rotating shafts is made here for the first time. Several isssues appearing in the present application are carefully investigated and several experimental results are presented to address the usefulness of the present method.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.277-280
• /
• 2008

In this work, the development of the diagnosis algorithm is carried out for identifying health and faulted conditions in three-phase induction motors. The algorithm consists of feature calculation, feature extraction, and feature classification procedures in sequence. Signals for this algorithm are acquired by current and flux sensors simultaneously, the latter is to measure the change of magnetic flux at the air-gap, This work proposes the efficient diagnosis method for induction motors by developing the powerful algorithm. The calculated features show a good linearity according to faults severities. Moreover. the final results show a good classification rate on motor conditions.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.328-330
• /
• 2007

This paper deals with the estimation method on the initial pole position of a z-axis permanent magnet linear synchronous motor(PMLSM) without magnetic pole sensors such as Hall sensors. The proposed method takes account of the z-axis conditions such as the gravitational force and also the load conditions. The algorithm consists of two steps. The first step is to estimate the initial q-axis approximately by monitoring the movements at predefined different test q-axes. The second step is to estimate the real q-axis as accurately as possible based on the results at three different test q-axes. Experimental results on the z-axis PMLSM show good estimation characteristics of the proposed method.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.393-401
• /
• 2009

This paper describes development of a new displacement sensor for intelligent suspension system in which the damping force has been controlled by MR fluid. Most of the current vehicle height sensors have been installed at external place of the damper and connected to that by mechanical linkages so far. The developed sensor has a new mechanism which detects movement of the sensor rod same as connecting rod in the suspension damper by using a GMR Sensor and converts it to the relative displacement from an initial position.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.163-164
• /
• 2007

In this study, we developed intelligent spacer built in the internal type UHF PD sensors. 3-Dimensional electro-magnetic simulations were performed to analyze electric-field distribution of the single-phase GIS and three-phase GIS. After considering the spacer's specification, Sensor structures were designed and analyzed using the 3-D EM Simulator. As a result of the simulation the internal type UHF PD sensors were built in. Performance of the sensor built into real scale GIS spacer was measured in terms of return loss and detected Max voltage. And we identified a character of the intelligent spacer by using 5pC partial discharge ceil.

• Journal of information and communication convergence engineering
• /
• v.4 no.3
• /
• pp.114-117
• /
• 2006

In this paper, we fabricated the EM wave absorber for 94 GHz radar sensors using Permalloy of magnetic material with chlorinated polyethylene (CPE), and S-parameter was measured. The complex relative permittivity and permeability are calculated by the measured data. Absorption abilities are simulated according to different thickness of the EM wave absorbers, and the EM wave absorber was manufactured based on the simulated design. Simulated and measured results agree very well. As a result, we developed the EM wave absorber with the thickness of 1.15 mm which has an absorption ability of 18 dB at 94 GHz.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.123-134
• /
• 2005

This research aims at developing a new method which can replace the existing method. known as the quality factor(Q factor) method by an L-R-C test for use in the performance test of inductive loop detectors(ILD) being installed and maintained. In this study, a sensor to detect a magnetic field in terms of frequency and intensity, a method to collect field data, the method of analysis, and the method of diagnosis were developed. An automatic diagnosis system which was developed to overcome those drawbacks has the following features : First, field data is collected automatically by a test vehicle equipped with magnetic field sensors that is running can be said to along the roadway and. thus, the new system completely overcome the roadway and, thus, the new system can be said to completely overcome the inefficiency of the existing method second, since the magnetic fold generated from the ILD is the final output of the whole system of ILD, the existing problem has been solved. third. since each of the detection area by height is collected by the magnetic sensors installed by height. a basic for the identification of the vehicle types to be detectable and the setting of adjustment factors has been made. For the automatic diagnosis system developed during in this study, a reliability test was carried out by comparing vehicle times of ILD installed ideally.