• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.585-588
• /
• 2001

Particle contamination on the data storage disks has been a serious problem for magnetic hard disk drive manufacturers. For high storage optical disks, such as DVD-ROM/RAM or NFR (near field recording) system, particle-induced damages can be also detected because only a few micrometer particles can prevent read/write signal from optical lens. The increasing areal density and smaller bit size accelerates particle induced damages on the optical disk. One of the methods to prevent particle contamination on the optical disk surface is to handle the disk enclosed in a cartridge like a modern DVD-RAM disk. However, even for a perfectly sealed disk drive, particles are found inside the drive. The other method is to improve disk surface characteristics. Particle contamination on the surface can be reduced by proper selection of disk coating materials. [n this paper, particle detachment ratios for CD (compact disk), DVD (digital versatile disk), HD (magnetic hard disk), HD with Jut lubricant, and aluminosilicate substrate HD were investigated. Surface roughness and surface energy of the test disks were compared with the particle detachment ratios. Proper substrate and lubricant characteristics to reduce particle contamination on the disk surface were found.

• 대한의용생체공학회:의공학회지
• /
• 제35권4호
• /
• pp.105-110
• /
• 2014

For the combination of MRI and magnetic particle hyperthermia(MPH), we investigated the relative heating efficiency with respect to the strength of the static magnetic field under which the magnetic nanoparticles are to be heated by RF magnetic field. We performed nanoparticle heating experiments at the fringe field of 3T MRI magnet with applying the RF magnetic field perpendicularly to the static magnetic field. The static field strengths were 0T, 0.1T, 0.2T, and 0.3T. To prevent the coil heat from conducting to the nanoparticle suspension, we cooled the heating solenoid coil with temperature-controlled water with applying heat insulators between the solenoid coil and the nanoparticle container. We observed significant decrease of heat generation, up to 6% at 0.3T(100% at 0T), due to the magnetic saturation of the nanoparticles of 15 nm diameter under the static field. We think MPH is still feasible at low magnetic field lower than 0.3T if stronger RF magnetic field generation is permitted.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.274-279
• /
• 2011

In this study, new abrasives that were composed of iron powder and carbon nanotube (CNT) particle were attempted to be abrasives for magnetic abrasive polishing. Because the CNT particles itself are very small ones with high hardness and magnetic strength, these properties are effective for magnetic abrasive polishing of nonmagnetic materials. As an experimental result for evaluating the machining characteristics in magnetic abrasive polishing, the CNT particles showed better performance than the conventional abrasives such as Fe and CBN powder.

• Journal of Magnetics
• /
• 제9권3호
• /
• pp.83-85
• /
• 2004

Magnetic nanoparticles have been investigated for use as biomedical purposes for several years. For biomedical applications the use of particles that present superparamagnetic behavior at room temperature is preferred [1-4]. To control the magnetic materials by magnetic field is essential locate particle to the suitable destination on feeding by injection. In order to use them properly, the particles should be nano size. However there are many difficulties in applications, because there is lack of identifications in nano magnetic properties. In our studies, structural and magnetic properties of iron oxide nanoparticles were investigated by XRD, VSM, TEM, and Mossbauer spectroscopy. At 13 K, hyperfine fields of ${\gamma}-Fe_2O_3$ were 516 kOe and 490 kOe, that of $Fe_3O_4$ were 517 kOe and 482 kOe. The saturation magnetizations were 21.42 emu/g and 39.42 emu/g. The particle size of powders is 5～19 nm.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권2호
• /
• pp.7-11
• /
• 2020

When rivers and lakes are contaminated with numerous contaminants, usually the contaminants are finally deposited on the sediments of the waterbody. Many clean up technologies have been developed for the contaminated sediments. Among several technologies dredging is one of the best methods because dredging removes all the contaminated sediments from the water and the contaminated sediments can be completely treated with physical and chemical methods. However the most worried phenomenon is suspension of fine particles during the dredging process. The suspended particle can release contaminants into water and resulted in spread of the contaminants and the increase of risk due to the resuspension of the precipitated contaminants such as heavy metals and toxic organic compounds. Therefore the success of the dredging process depends on the prevention of resuspension of fine particles. Advanced dredging processes employ pumping the sediment with water onto a ship and release the turbid water pumped with sediment into waterbody after collection of sediment solids. Before release of the turbid water into lake or river, just a few minutes allowed to precipitate the suspended particle due to the limited area on a dredging ship. However the fine particle cannot be removed by the gravitational settling over a few minutes. Environmental technology such as coagulation and precipitation could be applied for the settling of fine particles. However, the process needs coagulants and big settling tanks. For the quick settling of the fine particles suspended during dredging process magnetic separation has been tested in current study. Magnetic force increased the settling velocity and the increased settling process can reduce the volume of settling tank usually located in a ship for dredging. The magnetic assisted settling also decreased the heavy metal release through the turbid water by precipitating highly contaminated particles with magnetic force.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2007년도 High Temperature Superconductivity Vol.XVII
• /
• pp.8-8
• /
• 2007

• 비파괴검사학회지
• /
• 제16권3호
• /
• pp.162-173
• /
• 1996

본 연구는 강편 빌레트의 표면 결함을 검출하기 위한 건식 자분 탐상에 관한 것으로 자분 탐상능을 대상체에 흘리는 자화 전류, 대상체의 온도, 자분의 총 분사량 등에 대하여 평가하였다. 선재 제품의 등급에 따라 필요로 하는 몇 가지 강종을 선택하여 강종별 자기적 특성을 평가하였으며, 이를 입력 자료로 하여 유한 요소법에 의한 자기 해석을 행하였고, 그 결과를 직류 자화 전류에 의한 누설 자속 측정 결과와 비교 분석하였다. 교류 자화 전류에 의한 건식 자분 탐상능을 직류 자화 전류에 의한 탐상능과 비교하여 강종 및 자화 전류의 유형에 따른 자화 전류치를 결정하였다. 직류 자화 전류에 의한 자분 탐상 결과를 유한 요소법에 의한 계산과 비교하였고, 빌레트의 표면과 표면 결함 부위에서 측정한 누설 자속으로 비교 결과를 평가하였다. 각 강편재의 경우 직류 자화 전류에 의한 표면 자장은 그 형상에 의한 영향으로 코너 부위에서는 면 중앙의 표면 자장치에 비해 30% 정도였으며, 교류 자화 전류에 의해서는 그 비율이 70% 정도였다. 교류 자화 전류는 코너로부터 면중앙으로 10mm 되는 영역을 제외하고는 전 면에서 균일한 표면 자장을 발생하였다. 대상체의 온도에 따른 자분의 흡착은 대상체의 온도 $150^{\circ}C$ 까지는 큰 변화가 없으나 자분의 고착에 있어서 $60^{\circ}C$ 이상의 고온재에 대해서는 융착 용매로 메틸렌 크로라이드를 사용하는 것이 부적합하였다. 자분의 총분사량은 자분 탐상능에 상당히 큰 영향을 미침을 확인하였고 이에 대한 정량적 평가를 행하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.288-291
• /
• 2014

MRE(Magneto-rheological Elastomer) is a material which shows reversible and various modulus in magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, Silicon was used as a matrix in order to manufacture MREs. Magnetic reactive powder(MRP), having rapid magnetic reaction, was selected as a magnetic particle to give magnetic field reactive modulus. The mechanical properties of manufactured MREs were measured with the application of magnetic field. The analysis of MR effect was carried out by FFT analyzer with various induced magnetic field. As the addition of CIP and induced magnetic field intensity increased, increment of MR effect was observed.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.153-160
• /
• 2013

고무 혼합물의 가류특성 및 전자석 장치를 이용하여 범용고무를 기지로 하는 이방성 자기유동 고무 복합재료(MRRC)의 제조가 가능하였다. 철 입자(IP) 함유량의 증가에 따라 MRRC의 자기 투과율은 증가하였으며, 불규칙 배향에 비해 2 tesla로 배향시킨 경우가 1.8~2배 높게 나타났다. 2 tesla로 배향한 CNT만 강화한 MRRC의 자기 투과율은 3.7%로 자기장의 영향이 뚜렷이 확인되었다. IP 90 + CNT 5 & 2 tesla 배향의 MRRC는 압축시험 시 0.49 tesla의 자기장 하에서 압축응력이 기지에 비해 2.1배 증가하였다. IP 함유량 증가에 따라 자기유동(MR) 효과는 증가하였으며, IP 90 & 2 tesla 배향의 경우 20.4%의 MR 효과를 보였다. 시험편 제조 시 및 압축시험 시 부여한 자기력 세기가 MRRC의 압축특성에 미치는 영향이 크다고 판단된다.

• 한국재료학회지
• /
• 제12권4호
• /
• pp.264-268
• /
• 2002

Magnetic fluid is a very stable colloid that is attracted by magnetic force as wholly. The magnetic fluids is composed with 10 nm magnetic materials such as magnetite, iron etc., which is dispersed homogeneously in solvent by coating surfactant on their surface. Also this colloid is not separated into magnetic particles and solvent even under magnetic field, centrifugal force, gravity. Due to these properties, the magnetic fluids is used in high vacuum seal, exclusion seal, damper, etc. I would like to introduce the specific properties and applications of the magnetic fluids.