• 대한치과보철학회지
• /
• 제29권1호
• /
• pp.139-165
• /
• 1991

The properties of a investment material can be described by the consistency at the slurry state, the setting time, the compressive strength and the thermal expansion during the casting. In this study the effect of the production parameters which are included the ratio of quartz and cristobalite, the content of binder, the water powder ratio and the content and concentration of additives on the properties of the gypsum-bonded investments has been investigated with help of the consistency test, the vicat needle test, the compressive strength test, the thermal expansion test, x-ray diffraction and DTA thermal differential test. The experimental results showed that the constitution of a investment with W/P ratio of 0.34, 30% of gypsum, 0.8% aluminium sulfate, 2% magnesium sulfate, 0.6% sodium phosphate was adapted for the properties of the KDA Spec. No. 13 type I investment. The important experimental results are summarized as follows. 1. The consistency of the investment decreased with increasing amount of aluminium sulfate and decreasing amount of sodium phosphate. An addition of magnesium sulfate up to 2% an increase of the consistency was shown. But 3% magnesium sulfate in investment showed a decrease of consistency. The consistency did not vary significantly with a variation of the content of gypsum and cristobalite and the W/P ratio. 2. Aluminium sulfata and the magnesium sulfate promoted the hardening and the aluminium phoshpate delayed the hardening. The setting time increased with amount of gypsum. The effect of the matrix on the setting time was insignificant. With the W/P ratio of 0.34 the setting time was 14 min. 3. The compressive strength decreased with the amount of aluminium sulfate up to 0.25% and increased with the amount of aluminium sulfate greater than 3%. The compressive strength decreased as decreasing the amount of magnesium sulfate and gypsum and as increasing the W/P ratio. The effect fo the refractory on the compressive strength was also not significant. With the W/P ratio of 0.34 the compressive strength was $34Kg/mm^2$. 4. The 1st thermal expansion was found at the temperature near $250^{\circ}C$ and the steady state or the contraction stage was found at the temperature between $250^{\circ}C$ and $500^{\circ}C$. After this stage the 2nd thermal expansion took place at the temperature near $500^{\circ}C$. The amount of thermal expansion increased with decreasing the content of magnesium sulfate, aluminium sulfate and gypsum and the W/P ratio. And the amount of thermal expansion increased as the content of sodium phosphate ad cristobalite. With the W/P ratio of 0.34 the amount of total expansion was 1.2%.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권1호
• /
• pp.18-24
• /
• 2016

광물탄산화는 이산화탄소를 칼슘, 마그네슘 등을 함유한 금속산화물과 반응시켜 영구적으로 저장하는 기술이다. 본 연구에서는 직접탄산화 방법으로 이산화탄소를 저장하기 위해 해수와 알칼리성 산업부산물인 제지슬러지소각재(PSA)를 사용하였다. 다양한 실험을 통해 해수와 PSA를 이용한 직접탄산화 반응의 최적 용매의 양(해수와 PSA의 혼합비)과 반응시간을 찾았고, PSA를 이용한 직접탄산화 반응에 해수와 초순수를 각각 용매로 사용했을 때의 이산화탄소 저장량을 비교하였다. 이산화탄소 저장량은 탄산화반응 후 고체증가량과 열중량분석 결과를 이용해서 계산하였다. 실험에 사용한 PSA는 미세하고 67.2%의 칼슘을 포함하였다. $25^{\circ}C$, 1기압에서 해수를 PSA와 혼합하여 이산화탄소를 0.05 L/min 유량으로 주입하는 탄산화반응의 최적 용매의 양과 반응시간은 각각 5 mL/g, 2시간이었다. 해수와 초순수를 용매로 사용해서 PSA와 각각 혼합한 다음 탄산화했을 때, 이산화탄소 저장량은 각각 113, $101kg\;CO^2/(ton\;PSA)$이었다. 해수를 사용하여 탄산화한 고체는 대부분 calcite 형태의 탄산칼슘과 소량의 탄산마그네슘으로 구성되어있었고, 초순수를 사용했을 때의 고체도 calcite 형태의 탄산염임을 확인하였다.

• 한국광물학회지
• /
• 제19권2호
• /
• pp.111-121
• /
• 2006

금속 조합을 이용하여 배관내벽에 형성된 스케일의 제거 및 억제 가능성과 광물학적 특성을 연구하기 위하여 주사전자현미경, 방안실체현미경, 선회절분석, 스케일 제거실험을 실시하였다. 배관내벽에 생성된 스케일은 대부분 철광물로 구성되어있으며 약간의 Si와 Ca 광물을 포함하고 있다. 배관내벽의 스케일을 제거하는 데 내부 금속을 Mg, 외부금속을 황동으로 실험하였을 때 가장 좋은 효과를 나타낸다.

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.291-297
• /
• 1994

Cordierite powders were prepared by controlled hydrolysis of metal alkoxides with catalysts in water medium without using organic solvents. Water was adjusted to a certain pH by HC1 and NH4OH. $\alpha$-Cordierite powder was prepared from aluminum isopropoxide, tetraethyl orthosilicate and magnesium ethoxide mixed with water adjusted to pH of 3. At water pH of 11, $\alpha$-cordierite, mullite and $\beta$-quartz phases were coexisted. The powders were freeze dried, calcined and then fired at different temperatures. The characteristics of powders were examined by means of DTA, X-ray diffraction, FT-IR, and electron microscopy. It was found that $\alpha$-cordierite could be synthesized at temperature of 120$0^{\circ}C$ from the powders prepared by alkoxides with water medium without organic solvents.

• 한국토양비료학회지
• /
• 제29권2호
• /
• pp.113-123
• /
• 1996

국내산(國內産)과 수입(輸入) 중국산(中國産) 입상(粒狀) 용성인비(熔成燐肥)의 물리화학적 특성을 비교하기 위해 pH의 경시적 변화, 입도분포(粒度分布), 수중 및 토양중 붕괴도(崩壞度), 토양중 경도(硬度), 제품의 화학성분(化學成分) 함량(含量) 분석(分析), 수중 및 토양중 구용성(枸溶性) 인산(燐酸) 용출율(溶出率) 등(等)을 검토한 결과를 요약(要約)하면 다음과 같다. 1. pH의 경시적(傾時的) 변화(變化)는 중문통(中文統)(농암갈색(濃暗褐色) 토양(土壤))이 평대통(坪垈統)(흑색(黑色) 토양(土壤))보다, 수입(輸入) 중국산(中國産) 제품(製品)이 풍농비료 제품 보다, 중문통(中文統)에 용성인비(熔成燐肥)를 다량(多量) 시용(施用)한 것이 소량 시용한 것 보다 pH의 변화(變化)가 컸었다. 2. 국내산(國內産) 용성인비(熔成燐肥)는 수입 중국산 용성인비에 비하여 pH, 석회(石灰), 알카리분 및 가용성(可溶性) 규산함량(珪酸含量)이 낮았으나 인산(燐酸) 전량(全量), 구용성(枸溶性) 인산(燐酸), 고토(苦土)(가용성(可溶性) 구용성(枸溶性)) 및 구용성(枸溶性) 망간은 약간 높거나 서로 비슷하였다. 3. 입도(粒度)의 크기는 수입(輸入) 중국산(中國産) 제품(製品)이 가장 크고 그 다음이 경기화학(京畿化學) 제품(製品)이며 풍농비료(豊農肥料)의 제품(製品)은 비교적 입자가 작았다. 4. 수중(水中) 및 토양중(土壤中) 붕괴도(崩壞度)는 초기(初期)에는 풍농비료 제품과 경기화학 제품이 낮았으나 후기(後期)에는 경기화학 제품>수입 중국산 제품>풍농비료 제품의 순으로 붕괴도가 낮았다. 5. 토양중(土壤中) 경도(硬度)는 경기화학(京畿化學) 제품(製品)이 가장 단단하였고 그 다음이 풍농비료(豊農肥料) 제품(製品)이며 수입(輸入) 중국산(中國産) 제품(製品)은 경도계로 측정할 수 없을 정도로 약하였다. 6. 구용성(枸溶性) 인산(燐酸) 용출율(溶出率)은 초기에는 경기화학(京畿化學) 제품(製品)이 가장 높았고 풍농비료(豊農肥料) 제품(製品)은 가장 낮았으며, 용출 50일에는 3제품(製品) 모두 90% 이상 용출되었고 용출 70일 이후는 제품간(製品間) 차이가 거의 없었다. 7. 토양중(土壤中) 구용성(枸溶性) 인산(燐酸) 용출율(溶出率)은 풍농비료(豊農肥料) 제품(製品)이 가장 높았고 수입(輸入) 중국산(中國産) 제품(製品)이 가장 낮았으며 용출일 100일에도 60%를 넘지 못하였다.

• 콘크리트학회논문집
• /
• 제22권2호
• /
• pp.219-228
• /
• 2010

하수도, 오 폐수, 토양 속, 지하수 및 해수 등의 환경에 건설되는 콘크리트 구조물은 산 및 황산염에 노출되어 있다. 이 같은 산 및 황산염 침투로 포틀랜드 시멘트 중의 수화생성물과 산 및 황산염 이온이 반응하여 팽창 수화물을 생성함으로써 콘크리트에 팽창 및 균열을 발생시켜, 결국 콘크리트 매트릭스에 손상을 일으킨다. 따라서 이 연구의 목적은 콘크리트의 황산 및 황산염 침투 저항성에 미치는 광물질 혼화재의 영향을 평가하여, 황산 및 황산염 침투에 대한 고저항성 콘크리트를 제시하는 것이다. 이를 위하여 광물질 혼화재의 형태 및 비율을 변화시킨 OPC, 2성분계 및 3성분계의 3가지 종류의 시멘트를 사용하여 물-결합재비 32% 및 43%인 콘크리트를 제조하였다. 제작된 콘크리트 시편은 민물, 5% 황산, 10% 황산나트륨 및 10% 황산마그네슘 용액에 재령 28, 56, 91, 182 및 365일 동안 각각 침지시켰다. 콘크리트의 황산 및 황산염 침투 저항성을 평가하기 위하여 외관변화 관찰과 압축강도 비 및 질량 변화율을 측정하였다. 그 결과, 광물질 혼화재를 혼입한 콘크리트의 황산 및 황산나트륨 침투에 대한 저항성은 OPC 콘크리트 경우 보다 훨씬 우수한 것으로 나타났으나, 황산마그네슘의 경우 비결합재질의 규산마그네슘수화물(M-S-H)의 형성으로 광물질 혼화재를 혼입한 콘크리트가 OPC 콘크리트보다 불리한 것으로 나타났다.

• 한국환경보건학회지
• /
• 제14권1호
• /
• pp.33-38
• /
• 1988

Natural mineral water is generally quite different from ordinary drinking water due to its original nature and various properties. The complexity of natural mineral water requires, therefore, not only to identify its nature and proper characteristics, but also to classify them by a reasonable scientific basis of comparison. The study was concentrated on a possible classification technique to natural mineral waters by their constitutions and physico-ehemical properties. The classification was carried out by the computation of such numerical parameters as ionic equivalent percentage, electrolytic conductance or mobility, ionic molecular weight, molecular concentration, equivalent conductivity and degree of ionization in consideration of the determinative criteria as follows -particular single element or molecule -major components of natural waters as bicarbonate, sulphate, chloride,caloride, calcium, magnesium, and sodium -moleculat concentration related to blood osmotic pressure -water temperature at emergence from spring -contents of free carbon dioxide (CO2) -pH value of water -total dissolved solids or salts (NaCl) The results obtained proved out to be clearly distinguhhable from ordinary drinking water as far as concern natural mineral water as an example on the subject -simple water -bicarbonate-predominating water -cold spring -carbonated-non gaseous water -weak alkaline water -non saline water Putting these various results together, the sample turned out to be a kind of natural mineral water that can be used as a drinking water if microbiologically safe.

• 한국산업보건학회지
• /
• 제7권2호
• /
• pp.209-222
• /
• 1997

Authors surveyed the ground water near the waste disposed from a fiberglass production factory to confirm the presence of glassfiber in the water and to determine the effect of sampling conditions and storage on the recovery of fibrous materials in the ground water. Sample was collected at every 4 hours for 48 hours consecutively. After finishing the 48 hours sample, water sampling was done from each tap after repeated turning on and off the water for 30 seconds at each time. Sample was collected in the two 1.5 liter polyethylene bottle after vigorously shaking the bottle with the same water several times with the flowing tap water. At each paired sample, one bottle was stored stand still at room temperature, and the other sample was filtered immediately after sampling. Water was filtered on the Mixed Cellulose Ester filter with negative pressure. Each sample was divided into upper and lower layer. The other bottle was stored at room temperature standstill for 7 days and filtered in the same fashion as the other pair of sample did. Each MCE filter was divided into 4 pieces and one piece was treated with acetone to make it transparent. Each prepared sample was observed by two researchers under the light and polarizing microscopy, scanning electron microscopy and energy dispersive X-ra microanalysis. Fibers were classified by the morphology and polarizing pattern under the polarizing microscope, and count was done. 1. There was a significant fluctuation in number of the fibers, but there was no specific demonstrable pattern. 2. Non-polarizing fibers frequently disappeared after 7 days's storage. But cluster of fibers were found at the wall of the same container by scratching technique. 3. Polarizing fibers were usually found in between the filter and the manicure pasted area. Possible explanations for this phenomenon will be that either these fibers are very light or have electronic polarity. Hence, these fibers are not able to be attached on the surface of slide glass. 4. Under the scanning electron microscopic examination, the fibers which are not refractive under the light microscopy were identified as glassfiber. Other fibers which is refractive under the polarizing microscopy were identified as magnesium silicate fibers. It is strongly suggested that development of standardized method of sample collection and measurement of fibrous material in the water is needed.

• 한국어병학회지
• /
• 제34권2호
• /
• pp.225-231
• /
• 2021

In biofloc culture for olive flounder, Paralichthys olivaceus, the possibility of antibiotics treatment was investigated against edwardsiellosis. After inducing edwardsiellosis by immersion in Edwardsiella tarda 1.2 × 10⁵/mL suspension, the survival trends on various biofloc water management and some physiological changes were observed. For biofloc water management, six types of water treatments were carried out, which were no exchange without antibiotics as negative control, the exchange to stored biofloc water, the exchange to stored biofloc water with 20% flow-through, the exchange to fresh biofloc water, half fresh biofloc water and half sea water, and the complete flow-through. There was no significant physicochemical change on water qualities in any type. The exchange to fresh biofloc water was shown the highest survival ratio as 72.3%, and in case of stored biofloc water with 20% flow-through, the survival ratio was also significantly high as 62%. Plasma glucose, cholesterol, total protein, calcium, and magnesium were analyzed as physiological index. Mostly, there was no significant change, but plasma cholesterol showed an initial decrease in low survival group, and an initial increase with high survival group. Consequently, antibiotic treatment against a bacterial disease during biofloc culture is possible as long as the biofloc water management follow along properly.

• 대한화장품학회지
• /
• 제25권4호
• /
• pp.65-74
• /
• 1999

We have studied the stability of W/O high internal phase emulsions(HIPE) containing water, cetyl dimethicone copolyol and oils varying magnesium sulfate in the range 0 to 0.5 wt% and oil polarities, respectively. The rheological consistency was mainly destroyed by the coalescence of the deformed water droplets. The greater the increase of complex modulus was, the less coalescence occurred and the more consistent the concentrated emulsions were. The increasing pattern of complex modulus versus volume fraction has been explained with the resistance to coalescence of the deformed interfacial film of water droplets in concentrated W/O emulsion. The stability is dependent on: (i) the choice of the oil is important, the requirements coincide with the requirements for the formation of the rigid liquid crystalline phases; and (ii) addition of salts the aqueous phase opposes the instability due to coalescence. Increasing the salt concentration increases the refractive index of the aqueous phase. It lowers the difference in the refractive index between the oil and aqueous phases. This decreases the attraction between the water domains, thus increasing the stability.