• 대한화학회지
• /
• 제9권1호
• /
• pp.49-54
• /
• 1965

One of the difficult and time consuming problems in the production of magnesia from sea water is a settling rate of magnesium hydroxide. In this experiments, authors attempted to accelerate its settling rate by addition of various sedimenting agents as C.M.C., Separan and Starch, and sought for optimum calcination temperature for domestic dolomite, as alkali source, mole ratio of dolomite milk to bittern. It is observed through experiments that the small amounts of sedimenting agents, C.M.C., Separan, starch, 20 mg/l, 40 mg/l, 400mg/l, respectively increase the settling rate of magnesium hydroxide by 8 times or more. The following conditions resulted in good yield of magnesium hydroxide from sea water with relatively tolerable calcium oxide contaminated for the magnesium clinker. Calcinating temperature, $1,100{\sim}1,200^{\circ}C$, mole ratio of 10% dolomite milk to magnesium salts in sea water or bittern, 1. 2 : 1.

• 한국물환경학회지
• /
• 제27권4호
• /
• pp.438-444
• /
• 2011

Magnesium is one of the abundant natural resources in the earth crust and seawater, which is directly related to various organisms activities interconnecting with water-rock system. In aqueous system, magnesium is known to predominantly exist in the form of $Mg^{2+}$ ion which is verified in its $E_h-pH$ diagram. When it is at equilibrium in aqueous system, temperature takes an essential role to complete equilibrium states. This study represents the change of the stable region of magnesium ion according to temperature, and how the consequences would affect aquatic organisms. It was revealed that there is a noticeable tendency shrinking the stable region of magnesium ion in a diagram as temperature increases, and as a result, aquatic bio-species presumably have difficulties to absorb the nutrient. Also, it was considered that the water system would be acidified by decreasing alkalinity.

• Asian-Australasian Journal of Animal Sciences
• /
• 제1권1호
• /
• pp.33-41
• /
• 1988

In a study about minerals cycling in grassland agro-ecosystem, investigation on relations among two minerals, potassium(K) and magnesium(Mg), and nitrogen(N) was performed. Four kinds of diets different in K and N levels were fed to four goats with a Latin-square method and $2{\times}2$ factorial design. As the basal diet, press cake silage prepared from Italian ryegrass was used because of its uniformity and comparatively low mineral concentrations. Supplementation of K and N were made using potassium bicarbonate and urea. In the experiment, it was clearly shown that high K concentration in the forage crops is the main reason of the low utilization of Mg in ruminant animals. However, high nitrogen intake resulted in the increase of magnesium retention, urinary potassium excretion, water intake and volume of urine and in the decreases of potassium intake minus urinary potassium excretion. The results of high nitrogen intake seemed to be produced in the following order;increase of urine, increase of water intake, increase of urinary potassium excretion, and decrease of intake minus urinary potassium excretion. The amount of potassium intake minus urinary potassium excretion had significantly close relationships with magnesium utilization and serum magnesium concentration. As a conclusion, higher nitrogen intake by ruminants seemed to be preferable for magnesium utilization through increased water intake and urinary potassium excretion, if the sufficient drinking water could be supplied to ruminants.

• Advances in concrete construction
• /
• 제8권1호
• /
• pp.39-45
• /
• 2019

Durability of strengthened reinforced concrete (RC) beams with CFRP sheets under wetting and drying cycles of magnesium sulfate attack is investigated in this research. Accordingly, 18 RC beams were designed and made where 10 of them were strengthened by CFRP sheets at their tension side. Magnesium sulfate attack and wetting and drying cycles with water and magnesium sulfate solution were considered as exposure conditions. Finally, flexural performance of the beams was measured before and after 5 months of exposure. Results indicated that the bending capacity of the strengthened RC beams was reduced about 10% after 5 months of immersion in the magnesium sulfate solution. Wetting and drying cycles of magnesium sulfate solution reduced the bending capacity of the strengthened RC beams about 7%. Also, flexural capacity reduction of the strengthened RC beams in water and under wetting and drying cycles of water was negligible.

• 한국군사과학기술학회지
• /
• 제15권3호
• /
• pp.315-321
• /
• 2012

In the study, corrosion characteristics of AZ31 magnesium alloy under various environments exposed during machining(immersion in cutting oil, 5 % cutting oil aqueous solution and distilled water & contact with dissimilar metals, SPC4 and A5052-H32) were investigated. A corrosion test was performed AZ31 magnesium alloy was immersed in each electrolyte solution after contacting with each dissimilar metals, and the results were observed by an electron microscope. In immersion tests, corrosion of AZ31 magnesium alloy showed to be in the sequence of distilled water> 5 % cutting oil aqueous solution> cutting oil> air, and in the test of contact with dissimilar metals, corrosion showed to be in the sequence of SPC4> A5052-H32> AZ31. It can be concluded that to prevent corrosion during machining, AZ31 magnesium alloy must prevent contacting water and use magnesium alloy for raw material of Jig & Fixture.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.446-451
• /
• 2018

In this study, different formulations of magnesium oxide and various modifiers (phosphoric acid, ferrous sulfate, pure acrylic emulsion, silicone acrylic emulsion, glass fiber, and polypropylene fiber) were used to prepare magnesium oxychloride cement composites. The compressive strength of the magnesium oxychloride cement was tested, and the softening coefficients of the composites after soaking in water were also calculated. The results showed that a magnesium oxychloride cement sample could not be coagulated when the MgO activity was 24.3%, but the coagulation effect of the magnesium oxide cement sample was excellent when the MgO activity was 69.5%. While pure acrylic emulsion, silicon-acrylic emulsion, and glass fiber showed insignificant modification effects on the magnesium oxychloride cement, ferrous sulfate heptahydrate, phosphoric acid, and polypropylene fiber could effectively improve its water resistance and compressive strength. When the phosphoric acid, ferrous sulfate heptahydrate, and polypropylene fiber contents were 0.47%, 0.73%, and 0.25%, respectively, the softening coefficient of a composite soaked in water reached 0.93 after 7 days, and the compressive strength reached 64.3 MPa.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.236-237
• /
• 2014

Recently, it changes to the frame construction in the wall type structure for the life span improvement of the apartment house of our country. The execution of the light panel increased while the execution of the frame construction increased. Therefore, the density and absorption ratio of the magnesium oxide matrix according to the wood flour amount of addition ratio property try to be analyze for the lightweight of the surface material of the light panel. The test result, the density has been declined as the addition ratio increase of the wood flour. In the case of the water absorption ratio, water absorption ratio has been increased as addition ratio increase of wood flour. However, wood flour addition ratio 15% determined the most appropriate when considering the density and water absorption ratio.

• 한국세라믹학회지
• /
• 제23권3호
• /
• pp.94-98
• /
• 1986

Infrared has been used in determination of water in magnesium metaphosphate glasses. The method consisted of measuring the weight loss and the variation in absorption coefficient at 3, 200$cm^{-1}$. The molar absorptivity of water in magnesium metaphophate glasses was found to 76.9ι$mol^{-1} cm^{-1}$ Using the value for $\varepsilon$, A and Δ$\upsilon$H of the hydroxyl band in the spectra of magnesium metaphosphate. The molar absorptivity of the hydroxyl absorption band at 3, 3130-2, $925cm^{-1}$ in the spectra of MgO.$P_2O_5$ system glasses could be computed. And a variation of molar absorptivity against the MgO/P2O5 ratio has not been shown regulation.

• 접착 및 계면
• /
• 제9권2호
• /
• pp.24-31
• /
• 2008

본 연구에서는 EVA 에멀젼에 내수성 및 기계적 특성을 향상시키기 위하여 금속 이온 가교제인 calcium hydroxide 및 magnesium carbonate를 사용하여 이온성 가교결합을 도입하였다. EVA 에멀젼 필름의 가교밀도, 열적특성, 표면자유에너지 그리고 인장강도, 파단신율 및 인열강도 특성을 고찰하였다. 금속 이온 가교제 양이 증가함에 따라 EVA 에멀젼의 가교밀도는 증가하였고, 이에 내수성과 $T_g$ 값도 증가하였다. 그러나 EVA 에멀젼 필름의 표면에너지 및 기계적 특성들은 다소 다른 거동을 보였다. Calcium hydroxide 0.4% 그리고 magnesium carbonate 0.5%를 첨가한 경우가 EVA 에멀젼에 강한 이온성 가교결합이 형성되어 가장 높은 표면 자유에너지 값과 인장강도 및 인열강도를 보였다. 그러므로 본 연구에서 calcium hydroxide 및 magnesium carbonate와 같은 금속 이온 가교제가 EVA 에멀젼의 내수성과 기계적 물성을 향상시킴을 확인하였다.

• 한국세라믹학회지
• /
• 제23권5호
• /
• pp.75-80
• /
• 1986

The mechanical properties were measured for magnesium phosphate glasses containing small amounts of water. The decrease in hardness with increasing water content was resulted from a looser chain structure caused by water. The fracture of these glasses was changed from brittle fracture to plastic deformation as a results of the increased viscous flow with increasing water contents. The extent of any viscous flow or deformation initiating from the crack tips in these glasses could be considered as quite small.