• 제목/요약/키워드: maglev railway

검색결과 166건 처리시간 0.026초

전자흡인식자기부상차량(電磁吸引式磁氣浮上車輛)의 곡선부주행특성(曲線部走行特性) (Curvature Running Characteristics of Maglev vehicle)

  • 권병일
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1989년도 추계학술대회 논문집 학회본부
    • /
    • pp.58-62
    • /
    • 1989
  • Magnetic levitation railway is being developed as an advanced ground transport system which is high speed and has less environmental pollution. In this paper, the effectiveness of the proposed controller is proved by a vehicle body's curvature running characteristics. We select two types of transition curves for investigation, namely clothoid and sine.

  • PDF

도시형 자기부상열차의 성능시험 및 평가 (Performance Test and Evaluation of the Urban Transit Maglev)

  • 김국진;박계서;김남해;조흥제
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
    • /
    • pp.485-493
    • /
    • 1998
  • The EMS/LIM driven system, called UTM-01 has been under development for LRT type urban transit applications. At the present time, the 1st vehicle of UTM-01 (a two vehicle system) is undergoing various tests on the 1.1km test track at the KIMM premises in Taejon. This paper describes the design, characteristics and test results of the Levitation /Guidance, the Propulsion/Braking System and the Leakage Flux for 1st vehicle of UTM-01.

  • PDF

선형 유도전동기의 병렬 운전 특성 실험 (Parallel Operation Characteristics of Two Linear Induction Motors)

  • 박승찬;김경민
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2005년도 추계학술대회 논문집
    • /
    • pp.44-48
    • /
    • 2005
  • In general, the parallel-connected linear induction motors(LIM) are fed by one VVVF inverter in the magnetically levitated vehicle(MAGLEV) or linear motor subway drives. The air gap length of the parallel-connected linear induction motors operating at a grade or curved sections can be different each other. The air gap difference of the two motors attached to the same module causes unequal phase currents, asymmetic thrust and attraction force generation. In this paper, parellel-connected linear induction motors are operated by one IGBT inverter under the different air gap condition so that the phase current characteristics are examined experimentally.

  • PDF

자기부상열차 시스템의 수명주기비용 모델링에 관한 연구 (A Study on Modeling of Life Cycle Cost for Magnetic Levitation Train)

  • 이윤성;김진오;김형철;장동욱
    • 한국철도학회논문집
    • /
    • 제12권6호
    • /
    • pp.1076-1080
    • /
    • 2009
  • 수명주기비용(Life Cycle Cost, LCC) 분석이란 분석 대상의 수명주기 전 기간에 걸친 총 원가산정을 통하여 해당 시스템을 평가하는 것이다. 철도시스템은 급전, 기계, 전기신호 등의 분야가 결합된 시스템으로 대규모 자본을 효율적으로 이용해야만 하는 문제를 안고 있다. 특히, 자기부상열차 시스템은 고도의 기술력이 필요하며 현재 국내에서 개발 단계에 있는 시스템으로, 비용 관련 연구가 더욱 필요한 실정이다. 따라서 국외의 철도시스템 및 자기부상열차 시스템에 대한 수명주기비용 연구 동향을 바탕으로 하여 국내의 자기부상열차 시스템에 적용할 수 있는 수명주기비용에 관한 모델을 제안하고자 한다.

미국의 자기부상열차 기술개발과 상용화 현황

  • ;한형석
    • 철도저널
    • /
    • 제18권1호
    • /
    • pp.42-49
    • /
    • 2015
  • 이상에서 살펴본 것과 같이 과거 몇 년간 미국 내에서의 자기부상열차 기술개발과 노선건설에 있어서 그렇다할 성과는 없었다. 국가적 차원에서의 대규모 기술개발 자금지원도 없었고 단지 기업이나 주정부로부터의 재원조달이 주였다고 할 수 있다. 다행이 일본이 Washington DC와 Baltimore 노선에 일본의 초전도 자기부상열차 기술과 5조 원의 자금을 투자하겠다고 나서 가시적인 결과가 기대된다. 도시형의 경우 Orlando에서 24km 노선건설을 위한 토지임대협상이 진행 중인데 금년 봄에 결론에 도달할 것으로 알려지고 있다. 그 이외에도 몇 개의 다른 지역에서 노선건설이 추진 중이어서 더 두고 볼 일이다. 연구비 확보에 있어서는 연방정부의 지원이 줄자 전통적인 공공자금에서 민간자본으로 눈을 돌리는 것도 최근의 경향이라고 할 수 있다. 마지막으로 저자가 미국의 기술개발 환경에서 배운 점 중의 하나는 독창적인 기술이 미성숙이라고 하도라도 공개적으로 제안하고 평가를 받으며 사회는 그에 대한 연구비를 지원한다는 것이다. 그 결과 새로운 개념의 자기부상기술의 다수는 미국에서 나오고 있다.

MATLAB에 의한 열차 데이터 전달 특성 해석 (An analysis of data transmission characteristics in railway using MATLAB)

  • 안상권;최귀만;김양모
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1997년도 하계학술대회 논문집 A
    • /
    • pp.367-369
    • /
    • 1997
  • In signal system such as MAGLEV, the transmission channel that has wireless transmission line between on-board and ground-site is susceptible to have interference and may introduce data error on transmission. In this paper, by applying inductive wireless and FSK(frequency shift keying) modulation using widely in railway signal system, we intend to analyze the data transmission characteristics. In this case, noise may have effect on transmission channel. Therefore transmission channel should be lessened the data error from random noise. Considering the transmission medium, the objective of this study is to analyze the transmission characteristics between on-board and ground-site and to obtain transmission performance.

  • PDF

자기부상열차 현수장치용 공기스프링의 설계와 성능 시험 (The design and performance estimation of air springs for the suspension of Maglev)

  • 이재익;우이완;김국진;김영구
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 추계학술대회 논문집
    • /
    • pp.216-221
    • /
    • 2004
  • The performance of secondary suspension is one of the most important characteristics of railway vehicles in the regard of vibration and riding comfort. For this reason, the suspension shall be designed to absorb vibration energy effectively and to avoid the resonance which would be occurred by the vibration of the bogies in driving. The main factor of characteristics of suspension is spring coefficient of air spring, and this paper shows how to achieve the desired coefficient and the results of the tests of new air springs.

  • PDF

MATLAB에 의한 열차 정보전송의 스펙트럼확산 통신방식 적용 특성 해석 (An analysis of data transmission characteristics with spread-spectrum technique in railway using MATLAB)

  • 최귀만;김양모
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 A
    • /
    • pp.465-467
    • /
    • 1999
  • The data transmission system in MAGLEV is required a high quality and high speed for a train safety and reliability driving. In the transmission channel between a vehicle and a ground-site, Gaussian noise is negligible, but impulse noise from the chopper controlled propulsoin unit and the Power supplying device is very severe. The transmission channel must be protected from these noise. In this paper, we propose a DSSS (direct-sequence spread spectrum) modulation as a new data transmission technique in the railway and analyze this data transmission characteristics.

  • PDF

Analysis of the Magnetic Effect on the Tube Infrastructure for a Super Speed Tube Train

  • Lee, Hyung-Woo;Cho, Su-Yeon;Cho, Woo-Yeon;Lee, Ju;Kwon, Hyeok-Bin
    • International Journal of Railway
    • /
    • 제2권4호
    • /
    • pp.170-174
    • /
    • 2009
  • Super speed tube train is introduced to increase the speed of ground transportation. The super speed tube train levitates magnetically and runs in a partial vacuum tube, which can reduce the air resistance significantly. However, the strong magnetic force enough to propel the massive train can affect to the tube infrastructure. In this paper, authors have analyzed the leakage flux patterns and induced eddy current on the tube by using 3-dimensional Finite Element Method. These effects are investigated, especially by varying the materials and diameters of the tube. From the simulation results, the aluminum tube with the diameter of 3[m] is needed to be concerned because the induced eddy current produces joule heat, raises the inside temperature of the tube, and might be able to lead to electro-chemical corrosion on the tube, consequently reduce the durability.

  • PDF

가이드웨이 유연성이 고려된 자기부상열차 부상제어 시뮬레이션 (Levitation Control Simulation of a Maglev Vehicle Considering Guideway Flexibility)

  • 한종부;임재원;김창현;한형석;김성수
    • 한국철도학회논문집
    • /
    • 제18권1호
    • /
    • pp.15-24
    • /
    • 2015
  • 상전도흡인식 자기부상열차는 전자석의 전류를 조정하여 차량과 선로 사이의 간극(공극)을 일정하게 유지한다. 이러한 능동현가장치를 사용하는 자기부상열차에 있어서는 다양한 외란에도 불구하고 부상제어기를 이용한 부상공극을 허용하는 범위 내로 유지하는 것이 핵심기술 중의 하나이다. 특히 차량과 유연한 가이드웨이 사이의 동적상호작용에 의해 발생되는 진동은 저속 및 정지상태에서 부상안정성을 방해하는 중요한 요인으로 작용한다. 본 논문에서는 가이드웨이의 유연성에도 강인한 부상제어기를 개발하기 위하여 차량과 유연 가이드웨이 사이의 연성 동역학 모델을 개발하고, 전자석 및 부상제어기도 포함시키는 통합모델링을 제안하였다. 개발된 통합동역학 모델을 이용하여 가이드웨이의 유연성을 고려한 부상공극 시뮬레이션을 수행하였다.