• 제목/요약/키워드: made-to-measure

검색결과 2,070건 처리시간 0.03초

자기유도현상을 이용한 철근 응력측정 (Stress Measurement of Steel Bar Using Magnetoelasticity)

  • 임홍철;조영식
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2006년도 정기 학술대회 논문집
    • /
    • pp.77-81
    • /
    • 2006
  • An attempt has been made to measure existing steel stress using magnetoelasticity. A device has been developed and used for the measurement of magnetism in response to the deformation of a steel bar. The proposed technique can be used for the assessment of existing reinforced concrete structures by the measurements of steel stress embedded inside concrete. A traditional technique requires to break the existing steel bar to measure existing strain. However, the proposed technique is developed to measure the stress without damaging the steel bar. A successful application of magnetoelasticity depends on the establishment of relationship between elastic and magnetic response due to loading. To investigate the correlation between the two, steel bars are loaded in tension under uniaxial loading while the magnetic reading is recorded. Based on the test results, equations are suggested to predict stress for steel bars with different diameters.

  • PDF

On Assessing Inter-observer Agreement Independent of Variables' Measuring Units

  • Um, Yong-Hwan
    • Journal of the Korean Data and Information Science Society
    • /
    • 제17권2호
    • /
    • pp.529-536
    • /
    • 2006
  • Investigators use either Euclidean distance or volume of a simplex defined composed of data points as agreement index to measure chance-corrected agreement among observers for multivariate interval data. The agreement coefficient proposed by Um(2004) is based on a volume of a simplex and does not depend on the variables' measuring units. We consider a comparison of Um(2004)'s agreement coefficient with others based on two unit-free distance measures, Pearson distance and Mahalanobis distance. Comparison among them is made using hypothetical data set.

  • PDF

Ground Truth Measurement System Using RC Helicopter

  • Honda, Yoshiaki;Kajiwara, Koji;Tsutsui, Masanao;Ilzuka, Kazutaka
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.281-284
    • /
    • 1999
  • Ground truth measurement system using RC helicopter is very useful to measure BRDF. The helicopter is operated human operator but it can keep its position by GPS aided hovering system. We developed the measurement system and have done ground truth in Mongolia in the summer of 1999 and have made sure the system can measure BRDF expectedly.

  • PDF

고주파수분센서(FDR)를 활용한 콘크리트 단위수량 평가에 관한 실험적 연구 (An Experimental Study on the Evaluation of Concrete Unit-Water Content Using High Frequency Moisture Sensor (FDR))

  • 이승엽;양현민;이한승
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 가을 학술논문 발표대회
    • /
    • pp.59-60
    • /
    • 2021
  • The unit-water content has a major problem in concrete structures which leads to micro cracks on the concrete during drying time. Thus, the compressive strength and durability of the concrete structures are significantly reduced. Several techniques have been developed to measure the unit-water content in concrete structures such as heating drying, unit volume mass, and capacitance measurements. However, these techniques have problems in during measurement such as longer time, expensive and difficult in analysis of data. Frequency Domain Reflectivity (FDR) is one of the sensors which used to measure the water content. This method has several advantages including easy to measure, inexpensive, and capable of measuring moisture in real time. In this study, an attempt has been made to evaluate the unit-water content in concrete using the FDR sensor and interpret the data with deep learning method.

  • PDF

탐지효과도 및 누적탐지확률 (Measure of Effectiveness for Detection and Cumulative Detection Probability)

  • 조정홍;김재수;임준석;박지성
    • 한국군사과학기술학회지
    • /
    • 제15권5호
    • /
    • pp.601-614
    • /
    • 2012
  • Since the optimized use of sonar systems available for detection is a very practical problem for a given ocean environment, the measure of mission achievability is needed for operating the sonar system efficiently. In this paper, a theory on Measure Of Effectiveness(MOE) for specific mission such as detection is described as the measure of mission achievability, and a recursive Cumulative Detection Probability(CDP) algorithm is found to be most efficient from comparing three CDP algorithms for discrete glimpses search to reduce computation time and memory for complicated scenarios. The three CDPs which are MOE for sonar-maneuver pattern are calculated as time evolves for comparison, based on three different formula depending on the assumptions as follows; dependent or independent glimpses, unimodal or non-unimodal distribution of Probability of Detection(PD) as a function of observation time interval for detection. The proposed CDP algorithm which is made from unimodal formula is verified and applied to OASPP(Optimal Acoustic Search Path Planning) with complicated scenarios.

멤브레인식 LNG저장탱크 응력측정법 (The Stress Measurement of Membrane Type LNG Storage Tank)

  • 김영균;홍성호;윤인수;오병택;서흥석
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 춘계학술대회논문집A
    • /
    • pp.138-142
    • /
    • 2000
  • In LNG Tank, it is very important to measure the strain in Membrane by theoretical and experimental stress analysis. In this paper, perform the test about strain gage, thermal sensor and lead wire to make clear the properies. The test results conclude that stress measurement by strain gage must consider the effect of many factors to measure strain acculately. The corrections should be made on apparent strain, lead wire length and Membrane shape. It is also important to measure the temperatures accurately at the strain gage location

  • PDF

농촌 주거지역 쓰레기소각으로 인한 산불화재 개선방안에 관한 연구 (A Study on the Improvement Method of Forest Fire Caused by Waste Incineration at the Farming Residential Area)

  • 이영삼
    • 대한안전경영과학회지
    • /
    • 제18권3호
    • /
    • pp.9-15
    • /
    • 2016
  • Currently the forest area is 6,370,000 hectare (ha) which occupies 63.7% in Korea. The forest has good functions such as production of forest products, conservation of national land, prevention of disasters, etc. However constructing houses near the forest area make bad situation like illegal waste incineration by resident. So research subject is forest fire caused by waste incineration place including facility. And this study was conducted about statistical analysis and research analysis of the 100 waste incineration places including facilities at the country town. Statistical analysis shows that March is 27% which percentage is the highest number of forest fire in 10 years' average. The number of forest fire caused by waste incineration is 45 which is the third highest number in the fire statistic. The distance between waste incineration place including facility and forest area is 30m, 40m and 50m. That 40m (36%) is the most common distance from forest area. The types of waste incineration are ground (62%), the temporary facility made with oil drum can (35%) and other made with steel sheet, concrete, etc. The result of this study is that government and local government must conduct the improvement measure to reduce illegal incineration such as waste pickup area made with rain and wind proof type installed near residence, expenses for waste treatment, enlightenment and training, etc. Also considering their age and income are needed for realistic improvement.

중국 시장 내 한국과 중국 여성복 정장의 맞음새 관련 소비자 만족도 비교 연구 - 북경에 거주하는 성인 여성을 중심으로 - (A Comparative Study on Consumers' Satisfaction Levels Relating to the Fit of Korean and Chinese Women's Suits in the Chinese Market - Focused on Adult Women Residing in the Beijing Area -)

  • 석혜정
    • 대한가정학회지
    • /
    • 제44권6호
    • /
    • pp.121-127
    • /
    • 2006
  • The purpose of this study is to investigate the sin satisfaction and fitness of Chinese women for Korean-made women's suits. The study methodology was questionnaire survey and the subjects were randomly chosen, 20 to 49-year-old female shoppers at department stores in Beijing, China. The data analyses were performed with SPSS 12.0 through descriptive analysis, t-test, and crosstab analysis. The findings were as follows. Chinese women assessed both the fit satisfaction and fit suitability levels of Korean-made women's suits available in China to be higher than that of Chinese-made women's suits. Paticularly, in the tan of slacks showing the lowest suitability level among Chinese-made women's wear, Korean-made women's suits in China had outstandingly high suitability level. In the case of jackets, however, the Korean-made women's suits went through more fixings, on average, than Chinese-made women's suits. In addition, more fixings were done for enlargement than for contraction, which necessitated the measure changes.

영아-어머니간의 애착유형과 그 관련변인 (Patterns of Infant-Mother Attachment and Related Variables)

  • 박응임
    • 아동학회지
    • /
    • 제16권1호
    • /
    • pp.113-131
    • /
    • 1995
  • The objectives of this study were to investigate (1) the relations between infant-mother attachment and maternal sensitivity, maltreatment, stress, and childhood experience, and (2) relations between infant-mother attachment and infant temperament. The subjects of the study were 55 14 to 20 month-old infants (27 boys and 28 girls) and their mothers in Seoul. In order to assess the patterns of infant-mother attachment, each infant-mother dyad was videotaped in the modified Ainsworth's Strange Situation. Each dyad was filmed for 3 minutes in the Questionnaire Situation of Smith and Pederson(Smith, & Pederson, 1988) to assess maternal sensitivity responding to infant's cues. Each mother also was interviewed by using a semi-structured questionnaire made by author to measure maternal maltreatment. Each mother was asked to complete three Likert-type questionnaires, containing Parenting Stress Index (PSI) (Abidin, 1990) to measure the maternal stress, Mother-Father Peer Scale (MFPS) (Epstein, 1983) to measure childhood experience, and Emotionality, Activity, Sociality (EAS) (Buss, & Plomin, 1984) to measure infant's temperament. The statistical procedures used for data analyses were correlation, one-way ANOVA, multiple regression, and Cronbach's ${\alpha}$ coefficient. The results showed that (1) mothers of insecure-avoidant infants maltreated their infants more than mothers of secure infants, and (2) in the multiple regression analysis, maternal maltreatment was predicted by maternal education, maternal stress (parent domain), and maternal childhood experience in relation to her own mother (acceptance vs. rejection).

  • PDF

열특성을 이용한 물체 인식 센서의 구현 (Implementation of recognition sensor using thermal properties of object)

  • 박귀태;임영철;정우남;조경영;조진영
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
    • /
    • pp.438-442
    • /
    • 1988
  • In this paper, we describe a novel robot sensor designed to measure some of the thermal properties of a gripped object. The thermal conductivity of the object can be calculated by the proposed method. And the thermal sensor response enables robot system to discriminate between objects made of different materials.

  • PDF