• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.15-32
• /
• 1992

The purpose of this study was to detect the effect of the lower body type on the shape of flare skirts. The subjects for the wearing test were 50 female students, who were controlled in their hip and waist shapes. The skirts used for wearing test were six types(three flar angles $\times$ two fabric types). The effect of lower body type on the shape of flare skirts was determind by the hemline trace method and the silhouette photography. The data were then analyzed by the repeated measures of analysis of variance and the SNK multiple range test. The results obtained from this study were as follows : 1) When a flare skirt made with larger flare angle and better drapable fabric was worn, the numeric of the nodes increased as the drop value(hip - waist) increased. When a flare skirt made with smaller flare angle was worn, the width of horizontal sectio of hemline increased as the drop value increased. The hemline uneveness decreased on the sides and back as the drop value increased. When a flare skirt made with worse drapable fabric was worn, the sides angle of the flarskirt increased as the drop value increased. 2) When a flare skirt made with larger flare angle was worn, the numeric of nodes increased as the ratio of dropped hip increased. The wave-height increased and the back variation ratio of wave-height was higher than the front variation ratio of wave-height as the ratio of dropped hip increased. The hemiline uneveness decreased on the back as the ratio of dropped hip increased. When a flare skirt made with larger flare angle was worn, the sides angle of the flare skirt increased as the ratio of dropped hip increased.

• Transactions of Materials Processing
• /
• v.9 no.1
• /
• pp.52-58
• /
• 2000

Hot precision forging with a back pressure was investigated for manufacturing of compressor parts made of Al-Si alloy. Disk-shaped blank made of Al-Si alloy was hot forged, and ribs were formed by loading back pressure on their top. The influence of the back pressure and die temperature on forgeability and properties of parts made of Al-Si alloy were examined. Using the F.E.M. simulation, we found the optimum vallue of back-pressure. The prototypes of scroll parts were forged into the near-net shape and satisfied the required properties.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.809-814
• /
• 1998

Recently many cases that using strengthening method with a steel plate or carbon-fiber sheet in a construction field are increasing. In this reason, it is demanded that developing a plan of preventing delamination of strengthening material. So in this research, for the case of strengthening method of steel plate, it is made use of notch and anchor bolt and for the case of carbon fiber sheet, it is made use of notch, anchor bolt, line anchor and shear strengthening. After all the cases were applied, we made 15 specimen beams. The beams was measured and analyzed about the behavior property of strengthened beams, the ability strengthening method, the relation between load and the shape of failure, the crack load, the yield load, the shape of crack pattern, the increasing rate from yield load and maximum load and the strain of rebar. All the strengthening methods results in almost same value until the yield load, and it wasn't quite different from the theoretical value. But for the case of increasing rate from the yield load and maximum load, comparing with the existing method, the new strengthening methods are proved to be profitable about the safety.

• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.117-126
• /
• 2011

This study investigates the physical properties and manufacturing method of shape memory fabric for emotional garment made by polypropylene. For this purpose, polypropylene(PP) POY and SDY were texturized using low temperature and constant length heat treatment texturing technologies, respectively. The shape memory fabrics made using these texturized PP yarns were woven with two kinds of PET and PTT shape memory yarns on the air-jet loom and the various physical properties of four kinds of shape memory fabrics were measured and discussed. The tenacity and breaking strain of PP texturized yarns treated by low temperature and constant length heat treatment showed high weaving efficiency and the wet thermal shrinkage of PP textured yarns was shown less than 1.5%, dry thermal shrinkage was ranged between 3% and 5%, which means thermal stability compared to the PTT textured yarn with high thermal shrinkage, 5~8%. The shape memory characteristics of PP shape memory fabrics measured by Toray method showed five grade as same value as PTT shape memory fabric. The heat keeping property of the PP shape memory fabric showed 56% higher value than that of PTT shape memory fabric. The water repellency of PP shape memory fabric measured by spray method showed five grade as same value as PTT shape memory fabric treated with water repellent agent. Especially, shape memory properties of PP shape memory fabric measured by 3-D image and camera measurement methods showed similar characteristics to the PTT shape memory fabric.

• Journal of the Korean housing association
• /
• v.18 no.1
• /
• pp.113-122
• /
• 2007

Houses in Jeju city are divided into separated types and combination types of household affairs space. Other special types are separated-kitchen type. Separated household affairs space type is mostly built. Separated household affairs space type were sitting room + Gopang separate type and separate sitting room type. Combination household affairs space type made from sitting room, kitchen, Gopang and Chabang(Dinning room) put together as space differentiation, also into classes sitting room + kitchen + Gopang + Chabang type, sitting room + kitchen + Chabang type, sitting room + kitchen + Gopang, sitting room + kitchen type by combination household cares space type. Separated-kitchen type was one of the special type from separated-kitchen type of traditional housing, and type with continuous. Houses in Jeju city were 3 kan type and 4 kan type. 4kan type was mostly built. ㅡ shape is kept as plan shaped of straight shape, and roof shape is showed as ㅡ shape gathering roof. ㅡ shape + part projection type talls part projecting type as happened in Gopang, and Chabang. Roof is gathering roof, and when it is showed ㄱ shape by Gopang, Chabang, and kitchen are projected. ㅡ shape + total projection shape is one of the room become totally projected by Gopang and Chabang, can be happen with small room or kitchen, and roof as gathering roof shaped with ㅡ shape, ㄱ shape, ㄷ shape, unsystematic ㄹ shape, and various shapes.

• Fashion & Textile Research Journal
• /
• v.20 no.2
• /
• pp.219-225
• /
• 2018

The purpose of this study is to make an ideal dummy for adult Maltese with proper investigation of its character and direct measurement of dog body-shape. The results of the study are as follows; First, there were 6 factors to affect the characteristics of Maltese body in the analysis, which are size of body, leg shape, chest shape, leg thickness, body length, length between fore-legs. In the cluster analysis with the 6 factors there were two types of Maltese body. Type 1 has body characteristics with large body, thick leg, and small distance between front legs. Type 2 has average size of all factors including body size, leg thickness, and length between fore-legs. Second, type 2 was selected as a representative one to make a dummy reflected body shape of characteristics because it took 67.71% from entire considered factors and has average value in the measured size. The first dummy pattern was planned by copying the surface area of the representative body shape with the method of surgical tape. A dummy of single body with trunk and legs was made using 30's cotton cloth, polyester inside batting, compressed form PVC and metallic wire on the joint of trunk and legs to support dummy shape. The second pattern was made by correcting size difference of the pattern and adding the pattern of neck covering plate, metal magnetic button was inserted on the center of joint area of trunk and legs to make detachable legs for easy slip on and off the pet's wear.

• Korean Journal of Human Ecology
• /
• v.23 no.6
• /
• pp.1191-1204
• /
• 2014

Even though a Han-bok, or traditional Korean costume, should be inherited since it is invaluable part of our culture, research on Han-bok is scarce. Since the development of a Jeogori pattern, the upper garment of Korean traditional clothes, is done mostly based on the chest size, the design does not completely consider on wearer's body shape. Moreover, unless made by an expert, trial and error is almost always necessary to improve the fit of the clothes. In this research, a Jeogori pattern was suggested that improves the fit based on the shape of the upper back(straight or bent) of a female in her late 20s who often wears a Han-bok and is comfortable when moving. Using a 3D virtual clothing system, the optimum pattern was selected based on the body shape. The final selection was made, and each subjects tried the garment on to evaluate the comfort when moving, along with its appearance, based on a seven point Likert scale. As a result, for a straight body shape, the optimum ease for the front bust width was 2.5cm, and that for the back bust width was 2.0cm. The optimum center back dart was 1.0cm. The optimum Geodae width was 7.6cm, and the optimum back Geodae point was 2.0cm. For the bent body shape, the optimum ease for the front and back bust was 2.0cm. The optimum Geodae width was 8.4cm, and the optimum back Geodae point was 1.5cm. Furthermore, if the Hwajang slope was set at half of the vertical distance between the laterals of the neck and shoulder, a fitted silhouette appeared, which is preferred nowadays. In the appearance evaluation, the final pattern designed in this research received higher scores than the original design(straight; p<.001, bent; p<.05). The results of the evaluation of the comfort when moving also showed higher scores for the final pattern that was designed.

• Journal of the Ergonomics Society of Korea
• /
• v.10 no.2
• /
• pp.31-42
• /
• 1991

To understand the shape of the neck in a view of garment planning, principal component analysis has been appliedto the measurement of the neck. The neck surface development and the cross sections of the neck have been observed. The materials consist of the body mearsurements, the neck surface developments and the cross sec- tions of the necks of a total of 108 korean woman students. The difference between the right side and the left side of the neck has not been reconginiged. But the differenece among the height of the front neck point, that of the side neck point and that of the back neck point has been recognized. 2. The initial 41 items have been found having variety and duplication. So two criteria have been made to solve those problems and the selection of 34 items have been made by each criterion. 3. 43 and 34 items have been compared by means of accumulative ratios of contribution and of clearness within the meaning of principal component. As a result, 34 measurement items have been further anylysis. 4. As a result of principal component analysis on the 34 items, the four principal components have been found obtaines and inter-preted. The four principal components are 1) the thick of the neck, 2) the front neck-line on the waist basic pattern, basic pattern, 3) the shape of the neck surface development, and 4) the back neck-line on the waist basic pattern. 5. According to the graphic informations concerning these principal components, the meaning of these four principal components has been grasped on the visual. As a result, there is a large individual difference in the shape of neck.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.3
• /
• pp.1-9
• /
• 2001

The purpose of this article is to study the design and construction of Anap pond with a comparative study of ancient palace ponds in Korea, China and Japan. Anap pond was excavated in 1975-6 and is the oldest orignal pond to be found among Koran garden sites. Anap pond was made just before Shilla drove out Tang, after Shilla ruined Paekjae and Koguryo with the Tang army. This was a time Shilla enjoyed a multi-cultural situation due to interaction with Paekjae and Koguryo refugees, as well as information provided by the ambassadors sent to Tang who were well aquainted with Tang culture. Anap pond shows the influence of not only the indigenous mountain-god myth, but also the theoretical background common among Korea, China and Japan. But it also depicts the special form of space inbued with the exquisite aesthetic taste of Shilla people, which started with Anap pond hardened in Gaen temple, and which bloomed in Sukgulam. Scenery structure analysis gives a supposition of the center building on the western coatland, and sequential analysis gives the feeling of being at sea, analysised by root square shape analysis, equal ratio square shape and golden section, sow we can see the planned space organization by speculated planning. Thus, Anap pond is a garden of Shilla in which the cultural exchange has been inculturated and made our own, and the special aesthetic taste embodied.

• Geomechanics and Engineering
• /
• v.33 no.1
• /
• pp.91-99
• /
• 2023

To test the effect of various pile tip shape series of model scale loading tests were carried out on test piles with special pile tips. Special pile tips were made using the 3D printer and were attached to the bottom end of the test pile for loading tests. The pile tips were made to have 30°, 45°, 60° inclined tips, as well as a rounded tip. The main objective of the test was to observe the effect of various pile tip shapes on settlement and penetrability of the pile. Moreover, a numerical model simulating the pile loading test carried out in this study was established and verified based on the loading test results. From this, the stress concentration around the pile tip was investigated. This will allow us to analyze the decrease of stress concentration around the pile tip which is the main cause of the pile tip damage during pile installation. However, modifying the pile tip shape will eventually increase the settlement of the pile. By estimating the degree of increase in pile settlement, the viability and the efficiency of the pile shape modification was judged. In addition, case studies on the effect of different pile tip shape and ground conditions on pile settlement and stress dispersion was conducted.