• 대한수학회지
• /
• 제57권4호
• /
• pp.987-1004
• /
• 2020

Motivated by the traffic flow model with Arrhenius looka-head relaxation dynamics introduced in [25], this paper proposes a traffic flow model with look ahead relaxation-behind intensification by inserting look behind intensification dynamics to the flux. Finite time shock formation conditions in the proposed model with various types of interaction potentials are identified. Several numerical experiments are performed in order to demonstrate the performance of the modified model. It is observed that, comparing to other well-known macroscopic traffic flow models, the model equipped with look ahead relaxation-behind intensification has both enhanced dispersive and smoothing effects.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.181-183
• /
• 2002

The accurate permeability for preform is critical to model and design the impregnation of fluid resin in the composite manufacturing process. In this study, the in-plane and transverse permeability for a woven fabric are predicted numerically through the coupled flow model which combines microscopic with macroscopic flow. The microscopic and macroscopic flow which are flows within the micro-unit and macro-unit cell, respectively, are calculated by using 3-D CVFEM(control volume finite element method). To avoid checker-board pressure field and improve the efficiency on numerical computation, A new interpolation function for velocity is proposed on the basis of analytic solutions. The permeability of plain woven fabric is measured through unidirectional flow experiment and compared with the permeability calculated numerically. Based on the good agreement of the results, the relationships between the permeability and the structures of preform such as the fiber volume fraction and stacking effect can be understood. The reverse and the simple stacking are taken in account. Unlike past literatures, this study is based on more realistic unit cell and the improved prediction of permeability can be achieved. It is observed that in-plane flow is more dominant than transverse flow in the real flow through preform and the stacking effect of multi-layered preform is negligible. Consequently, the proposed coupled flow model can be applied to modeling of real composite materials processing.

• 한국분무공학회지
• /
• 제11권3호
• /
• pp.168-175
• /
• 2006

The static pressure distribution and flow characteristics inside the high-pressure swirl spray were investigated by measuring the static pressure inside the spray and applying the computational fluid dynamics (CFD). The static pressure difference between inner and outer part of spray was measured at different axial locations and operating conditions using a piezo-resislive pressure transducer. To obtain the qualitative value of swirl motion at different operating conditions, the spray impact-pressure at the nozzle exit was measured using a piezo-electric pressure transducer, and the flow angle was measured using a microscopic imaging system. The flow characteristics inside the high pressure swirl spray was simulated by the 1-phase 3-dimensional CFD model. The effect of pressure alternations on spray development was discussed with macroscopic spray images and a mathematical liquid film model. The results showed that the static pressure drop is observed inside the swirl spray as a result of the dragged air motion and the centrifugal force of the air. The recirculation vortex inside the spray was also observed inside the swirl spray as a result of the adverse pressure gradient along the axial locations. The results of analytical liquid film model and macroscopic spray images showed that the static pressure structure is one of the main parameters affecting the swirl spray development.

• 대한교통학회지
• /
• 제14권1호
• /
• pp.101-116
• /
• 1996

Increased attention has been paid in recent years to the need of traffic management for alleviating urban traffic congestion. This paper presents a discrete event modeling and simulation framework for analyzing the traffic flow. Traffic simulation models can be classified as being either microscopic and macroscopic models. The discrete event modeling and simulation technique can be basically employed to describe the macroscopic traffic simulation model. To do this, we have employed the System Entity Structure/Model Base (SES/MB) framework which integrates the dynamic-based formalism of simulation with the symbolic formalism of AI. The SES/MB framework supports to hierarchical, modular discrete event modeling and simulation environment. We also adopt the Symbolic DEVS (Discrete Event System Specification) to developed the automated analysis methodology for generating optimal signal light policy. Several simulation tests will demonstrates the techniques.

• 대한교통학회지
• /
• 제26권1호
• /
• pp.191-201
• /
• 2008

단속류의 교통시설 운영개선(TSM, Trasportation Systems Management)의 타당성 및 개선효과 분석을 위해 TRANSYT-7F(T7F)와 NETSIM이 많이 사용되고 있으나, T7F는 현실적인 차량군의 압축 분산효과가 미흡하고, NETSIM은 구축시간이 과다하게 소요되고, 용량설정의 어려움 등의 문제를 가지고 있다. 이에 반해, 충격파 모형은 T7F에 비해 차량군의 압축 분산을 더욱 사실적으로 묘사할 수 있으며, NETSIM에 비해서는 분석시간 단축, 적용용이성 등의 장점을 가지고 있어 우수하다. 하지만, 수리적 계산의 어려움으로 인해 비현실적인 교통류관계식(Q-K곡선) 적용, 단순한 차량군 적용 등의 문제점을 지니고 있다. 이러한 충격파이론을 이용한 기존 분석모형의 문제점을 해소하기 위해보다 현실적인 교통류관계식 적용, 새로운 차량군모형 개발, 연장충격파 개념 도입 등 새로운 분석모형을 개발하였으며, 개발모형의 유효성 검증을 위해 다양한 시나리오를 구성하여 T7F와 NETSIM과 비교 평가한 결과 우수한 성능을 보였다.

• 대한교통학회지
• /
• 제27권1호
• /
• pp.27-34
• /
• 2009

도로교통망의 시스템변화에 대한 효과분석의 일환으로 1979년 Herman이 제시한 Two-Fluid Model을 적용하여 거시적인 교통류 변화특성을 분석하였으며, 이를 통해 도로시설의 운영개선 효과를 정량적으로 확인하였다. 본 연구에서는 일반국도 3호선 의정부 전체 구간의 약 8km, 총 31개 신호교차로를 분석 대상으로 하며, TSIS CORSIM 및 Run Time Extension을 이용한 미시적 시뮬레이션 분석으로 현황 및 개선 대안에 대한 개별차량의 주행정보를 추출하였다. Two-Fluid Model의 파라메타 산출결과 현황 대비 신호제어시스템 개선 시 네트워크의 서비스 질을 의미하는 단위거리 당 평균최소통행시간(Tm)은 약 35% 감소하였으며, 네트워크 수요증가에 대한 저항성을 의미하는 파라메타 n은 약 28%의 향상된 결과를 나타내었다. 국도 축을 대상으로 하는 시뮬레이션 기반의 자료 수집으로 인해 제한된 연구결과이나 Two-Fluid Model이 신호 최적화 및 연동형 반감응제어의 적용 등 신호제어시스템 개선에 대한 우수한 거시적 효과평가 지표로 활용되어 질 수 있음을 확인하였다.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.472-480
• /
• 2000

A macroscopic yield criterion for porous solids with pressure-sensitive matrices modeled by Coulomb's yield criterion was obtained by generalizing Gurson's yield criterion with consideration of the hydrostatic yield stresses for a spherical thick-walled shell and by fitting the finite element results of a voided cube. The macroscopic yield criterion is valid for negative mean normal stresses as well as for positive mean normal stresses. From the yield criterion, a plastic potential function for the porous solids was derived either for plastic normality flow or for plastic non-normality flow of pressure- sensitive matrices. In addition, the elastic relation, an evolution equation of the plastic flow stress of the matrices and an evolution equation of the void volume fraction were presented to complete a set of constitutive relations. The set of constitutive relations was implemented into a finite element code ABAQUS to analyze the material behavior of rubber-toughened epoxies. The cavitation and the deformation behavior were analyzed around a crack tip under three-point bending and around notch tips under four-point bending. In the numerical analyses, the cavitation of rubber particles was considered via a stress-controlled nucleation model. The numerical results indicate that a reasonable cavitation zone can be obtained with void nucleation controlled by the macroscopic mean normal stress, and a plastic zone is smaller around a notch tip under compression than under tension. These numerical results agree well with corresponding experimental results on the cavitation and plastic zones.

• 대한교통학회지
• /
• 제20권3호
• /
• pp.69-82
• /
• 2002

본 연구는 도시고속도로 교통류의 효과적인 관리와 운영상태 평가에 사용되는 거시적 연속교통류 재현 모형의 성능 비교에 관한 연구이다. 연속교통류 재현을 위한 거시적 모형은 크게 단순연속방정식 모형과 가속도방정식 모형의 범주 안에서 여러 모형들이 개발되어져 왔지만, 국내에서는 이 두 모형들에 대한 성능 비교에 관한 연구가 미흡한 실정이다. 따라서, 본 연구는 대표적인 거시적 연속교통류 모형들의 성능평가를 통해서 개개 모형들이 가지고 있는 특징을 알아본 후 대도시 고속도로의 교통류 재현에 이용할 수 있는 모형을 선정한다. 모형의 성능 비교를 위해 거시적 연속교통류 모형 중에서 대표적인 5개 모형(Lax Method Model, Upwind Scheme Model, Hilliges' Model, Papageorgiou's Model, Cell-Transmission Model)을 선택하였으며, Numerical Example과 실측 현장자료를 이용하여 모형들의 성능 비교를 실시하였다. 가상자료를 이용한 분석방법에서는 대체로 모든 모형이 적절한 결과값을 보여주었지만, 단순 연속방정식 모형이 모형의 안정성과 교통상황 재현력 측면에서 볼 때 가속도방정식 모형보다 좀더 안정적인 결과값을 보여주었다. 현장자료를 이용한 분석방법에서는 미국의 Nimitz Freeway의 오전 첨두시 3시간 교통 자료(밀도, 교통량)를 이용하였다. 분석대상구간에 대한 모형성능 평가결과, 단순연속방정식 모형의 결과와 가속도방정식 모형의 결과가 유사하게 나왔으며. 비교적 계산식이 단순한 거시적 연속교통류 모형들도 분석대상구간의 혼잡상황을 어느 정도 잘 재현하고 있음을 보여준다.

• 대한교통학회지
• /
• 제10권3호
• /
• pp.7-20
• /
• 1992

The common cycle time for the linded signals is usually determined for the critical intersecion, just because the cpacity of a signalized intersection depends on the cycle time. This may not be optimal since the interactions between the flow and the spatial structure of the route or the area are disregarded in this case. It is common to separate the total delay incurred at signals into two parts, a deterministic or uniform delay and a stochastic or random delay. The deterministic delays and the stochastic delays on the artery particularly related to signal cycle time. For this purpose a microscopic simulation technique is used to evaluate deterministic delays, and a macroscopic simulation technique based on the principles of Markov chains is used to evaluate stochastic delays with over flow queue. As a result of investigating the relations between deterministic delays and cycle time in the various circumstances of spacing of signals and traffic volume. As for stochastic delays the resalts of comparisons of the macroscopic simulation and Newell's approximation with the microscopic simulation indicate that the former is valid for the degree of saturation less than 0.95 and the latter is for that above 0.95. Newell's argument that the total stochastic delay on an arterial is dominated by that at or caused by critical intersection is certified by the simulation experiments. The comprehensive analyses of the values of optimal cycle time with various conditions lead to a model. The cycle time determined by this model shows to be approximately 70% of that calculated by Webster's.

• 한국도로학회논문집
• /
• 제18권1호
• /
• pp.119-129
• /
• 2016

PURPOSES : The purpose of this study is to develop a methodology for estimating additional carbon emissions due to freeway incidents. METHODS : As our country grows, our highway policy has mainly neglected the environmental and social sectors. However, with the formation of a national green growth keynote and an increase in the number of people interested in environmental and social issues, problems related to social issues, such as traffic accidents and congestion, and environmental issues, such as the impact of air pollution caused by exhaust gases that are emitted from highway vehicles, are beginning to be discussed. Accordingly, studies have been conducted on a variety of environmental aspects in the field of road transport, and for the quantitative calculation of greenhouse gas emissions, using various methods. However, in order to observe the effects of carbon emissions, microscopic simulations must use many difficult variables such as cost, analysis time, and ease of analysis process. In this study, additional greenhouse gas emissions that occur because of highway traffic accidents were classified by type (incident handling time, number of lanes blocked, freeway level of service), and the annual additional emissions based on incidents were calculated. According to the results, congestion length and emissions tend to increase with an increase in incident clearance time, number of occupied lanes, and worsening level of service. Using this data, we analyzed accident data on the Gyeong-bu Expressway (Yang-Jae IC - Osan IC) for a year. RESULTS : Additional greenhouse gas emissions that occur because of highway traffic accidents were classified by type (incident handling time, number of lanes blocked, freeway level of service) and annual additional emissions caused by accidents were calculated. CONCLUSIONS : In this study, a methodology for estimating carbon emissions due to freeway incidents was developed that incorporates macroscopic flow models. The results of the study are organized in the form of a look-Up table that calculates carbon emissions rather easily.