• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.6
• /
• pp.381-387
• /
• 2017

Dehydrogenation from the hydrolysis of a sodium borohydride ($NaBH_4$) solution has been of interest owing to its high theoretical hydrogen storage capacity (10.8 wt.％) and potentially safe operation. An experimental study has been performed on the catalytic reaction rate and pressure drop of a $NaBH_4$ solution over both a single microchannel with a hydraulic diameter of $300{\mu}m$ and a staggered array of micro pin fins in the microchannel with hydraulic diameter of $50{\mu}m$. The catalytic reaction rates and pressure drops were obtained under Reynolds numbers from 1 to 60 and solution concentrations from 5 to 20 wt.％. Moreover, reacting flows were visualized using a high-speed camera with a macro zoom lens. As a result, both the amount of hydrogenation and pressure drop are 2.45 times and 1.5 times larger in a pin fin microchannel array than in a single microchannel, respectively.

• Journal of Energy Engineering
• /
• v.12 no.3
• /
• pp.231-240
• /
• 2003

Reactivity of Char-CO$_2$ gasification of five coals for power generation was investigated with PTGA in the temperature range 850∼1000$^{\circ}C$ and the pressure range 0.5∼2.0 MPa. The effect of coal rank, initial char characteristics and pressure on the reaction rate was evaluated for five chars. The reactivity of low lank coal char was better than that of high rank coal char, and this could be explained with the initial pore structure and surface area of char. Meso/macro-pores of char seems to markedly affect char reactivity by way of providing channels for diffusion of reactant gas into the reactive surface area. For the range of tested pressure, the reaction rate is proportional to CO$_2$ partial pressure and the reaction order ranges from 0.4 to 0.7 for five chars. The effect of total pressure on the reaction rate was small, and kinetic parameters, based on the unreacted core model, were obtained for five chars.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.87-95
• /
• 2012

In recent years, laser-arc hybrid welding has begun to be adopted for assembly welding of automotive bodies and parts, because the hybrid welding process can weld lapped steel sheets having a larger gap than is possible with laser welding. In this paper, to predict the twist deformation by the hybrid welding when brackets are welded in B pillar of a passenger car, the residual stress using CAE is analyzed and the deformation result of CAE is compared with the measured deformation. First of all, after modeling heat source as intended to be expressed with laser-arc hybrid welding method, heat source fitting is done with welding conditions and a section of welding part obtained through specimen test. In case of heat source functions, laser used conical source and arc used double ellipsoid source. Through the local model analysis, elements which are located in the center of the model are selected. The elements are called WME(Welding Macro Element). This WME is extruded in the welding lines and welding phenomenon of complex parts is accomplished. The deformation amount after hybrid welding is got through a simulation, the validity of simulation is verified by measuring the panel and comparing with the simulation result.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.6
• /
• pp.91-96
• /
• 2011

In this paper, friction welded joints were constructed to investigate the mechanical properties of welded 15-mm diameter solid bars of Mg alloy (AZ31B). The main friction welding parameters were selected to endure reliable quality welds on the basis of visual examination, tensile tests, impact energy test, Vickers hardness surveys of the bonds in the area and heat affected zone (HAZ), and macrostructure investigations. The study reached the following conclusions. The tensile strength of the friction welded materials (271 MPa) was increased to about 100% of the AZ31B base metal (274 MPa) under the condition of a heating time of 1 s. The metal loss increased lineally with an increase in the heating time. The following optimal friction welding conditions were determined: rotating speed (n) = 2000 rpm, heating pressure (HP) = 35 MPa, upsetting pressure (UP) = 70 MPa, heating time (HT) = 1 s, and upsetting time (UT) = 5 s, for a metal loss (Mo) of 10.2 mm. The hardness distribution of the base metal (BM) showed HV55. All of the BM parts showed levels of hardness that were approximately similar to friction welded materials. The weld interface of the friction welded parts was strongly mixed, which showed a well-combined structure of macro-particles without particle growth or any defects. In addition, an acoustic emission (AE) technique was applied to derive the optimum condition for friction welding the Mg alloy nondestructively. The AE count and energy parameters were useful for evaluating the relationship between the tensile strength and AE parameters based on the friction welding conditions.

• Structural Engineering and Mechanics
• /
• v.76 no.2
• /
• pp.153-162
• /
• 2020

Aiming at the mechanical and structural characteristics of the contact zone composite rock, the shear tests and numerical studies were carried out. The effects of the differences in mechanical properties of different materials and the normal stress on shear properties of contact zone composite samples were analyzed from a macro-meso level. The results show that the composite samples have high shear strength, and the interface of different materials has strong adhesion. The differences in mechanical properties of materials weakens the shear strength and increase the shear brittleness of the sample, while normal stress will inhibit these effect. Under low/high normal stress, the sample show two failure modes, at the meso-damage level: elastic-shearing-frictional sliding and elastic-extrusion wear. This is mainly controlled by the contact and friction state of the material after damage. The secondary failure of undulating structure under normal-shear stress is the nature of extrusion wear, which is positively correlated to the normal stress and the degree of difference in mechanical properties of different materials. The increase of the mechanical difference of the sample will enhance the shear brittleness under lower normal stress and the shear interaction under higher normal stress.

• The Journal of the Korea Contents Association
• /
• v.13 no.6
• /
• pp.20-29
• /
• 2013

The compression of video data is intended for real-time transmission of band-limited channels. Compressed video bit-streams are very sensitive to transmission error. If we lose packets or receive them with errors during transmission, not only the current frame will be corrupted, but also the error will propagate to succeeding frames due to the spatio-temporal predictive coding structure of sequences. Error detection and concealment is a good approach to reduce the bad influence on the reconstructed visual quality. To increase concealment efficiency, we need to get some more accurate error detection algorithm. In this paper, We hide specific data into the motion vector difference of each macro-block, which is obtained from the procedure of inter prediction mode in H.264/AVC. Then, the location of errors can be detected easily by checking transmitted specific data in decoder. We verified that the proposed algorithm generates good performances in PSNR and subjective visual quality through the computer simulation by H.324M mobile simulation tool.

• Korean Journal of Materials Research
• /
• v.13 no.7
• /
• pp.429-435
• /
• 2003

In this study the new creep test using miniaturized specimen(10${\times}$10${\times}$0.5 ㎣) was performed to evaluate the creep characteristics for degraded materials of 2.25Cr-1Mo steel. For this creep test, the artificially aged materials for 330 hrs and 1820hrs at $630^{\circ}C$ were used. The test temperatures applied for the creep deformation of miniaturized specimens was X$630^{\circ}C$ and the applied loads were between 45 kg∼80 kg. After creep test, macro- and microscopic observation were conducted by the scanning electron microscope(SEM). The creep curves depended definitely on applied load and microstructure and showed the three stages of creep behavior like uniaxial tensile creep curves. The load exponents of virgin, 330 hrs and 1820 hrs materials based on creep rate showed 14.8, 9.5 and 8.3 at $550^{\circ}C$ respectively, The 1820 hrs material showed the lowest load exponent and this behavior was also observed in the case of load exponent based on creep rupture time. In contrast to virgin material which exhibited fined dimple fractography, a lot of carbides like net structure and voids were observed on the fractography of degraded materials.

• Composites Research
• /
• v.29 no.5
• /
• pp.315-320
• /
• 2016

Conventionally, composite aircraft structures are fabricated within autoclave at high pressure. However, autoclave process has several disadvantages including high curing costs and limitation of part size. Recently, out-of-autoclave (OoA) processes have been investigated in many studies to replace conventional autoclave process. A newly developed OoA prepreg, using conventional ovens, can significantly reduce the curing costs and produce autoclave-quality parts. Nevertheless, manufacture of void-free complex shape structure using OoA process presents significant challenges because of the low consolidation pressure. In this study, integrated skin-spar-rib composite part was fabricated using OoA prepreg. And cross-sectional macro- and micro-graphs of the part were examined in order to assess the possibility of replacing conventional autoclave process.

• Korean journal of food and cookery science
• /
• v.30 no.2
• /
• pp.153-160
• /
• 2014

The purpose of this study was to develop a rice education program and rice cooking practice for university students majoring in foodservice and nutrition. To achieve this purpose, 2 rounds of delphi survey was used by convenience sampling including total of 27 experts in the food and nutrition industry. Below are the findings. First, both the importance and suitability for macro-theme of theory education were in the following order: 'nutrition and health of rice', 'characteristics of rice in food science', 'history and culture of rice' and 'the consumption of rice. Second, the history and culture of rice(traditional culture related to rice, and the origin & history of rice), nutrition and health of rice(main nutritive components and efficacy of rice and prevention of disease), characteristics of rice as food(processed-products of rice and storage, the structure of rice), and the consumption of rice(current status of rice production and consumption) were found to be suitable for the micro-theme of theory education. Third, the education theme for rice cooking practice was determined. Barley sprout song-pyeon and beet song-pyeon were chosen for rice cake. For bread, coconut & walnut muffin, tofu & bean muffin, citron bread, red bean & sweet persimmon pound cake, and sweet potato bread were selected. Dong-rae-pa-jeon, Kimch-jeon-byeong, fried sweet potato fried shrimp were developed for the main dishes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.11-18
• /
• 2016

Product liability (PL), which began enforcement in 2002, refers to the legal responsibility of the manufacturers or sellers (wholesales or retailers) for the property damage or bodily harm caused by their product. With a strong enforcement of the Product Liability (PL) Act, companies are required to structure and operate a response system to defend or prevent product accidents efficiently, but small and medium enterprises (SMEs) are unable to respond more aggressively due to limitation of management resources. In this manner, it is important to develop response strategies for SMEs to efficiently cope with the PL Act. In this paper, the PEST (Political, Economic, Social, and Technological) analysis is performed to reveal the impact of the PL Act on SMEs in macro-economic point of view. To formulate SME's PL response strategy, SWOT analysis is performed to categorize each factors from PEST analysis and AHP is applied to identify the intensities of SWOT factors. The prioritized SWOT factor, results of PEST-SWOT-AHP analysis, are used to formulate SME's PL response strategies. The study results are briefly summarized as follows. To reduce product defects, it is necessary for SMEs to formulate PL response strategies for each phase of the product life cycle by continuously collecting and analyzing PL cases in the same industry or for similar products. In addition, SMEs should invest more technological effort to ensure product safety. Further, SMEs should spread PL awareness to all staff members by training internal PL experts. Moreover, a SME should enroll in PL insurance and spread this information to its customers so that they become aware that the company is proactively conforming to the PL law.