• 한국주조공학회지
• /
• 제32권6호
• /
• pp.269-275
• /
• 2012

Al-Mg-Si/Al hybrid alloy was prepared by Duo-casting and the mechanical behavior was evaluated based on their microstructure and mechanical properties. The hybrid aluminum alloy included the Al-Mg-Si alloy with fine eutectic structure, pure Al with the columnar and equiaxed crystals, and the macro-interface existing between Al-Mg-Si alloy and pure Al. The growth of columnar grains in pure Al occurred from the macro-interface. The tensile strength, 0.2% proof stress and bending strength of the hybrid aluminum alloy were almost similar to those of pure Al, and the elongation was much higher than the Al-Mg-Si alloy. The fracture of the hybrid alloy took place in pure Al side, indicating that the macro-interface was well bonded and the mechanical behavior strongly depends on the limited deformation in pure Al side.

• 한국전기전자재료학회논문지
• /
• 제26권8호
• /
• pp.582-586
• /
• 2013

In this paper, a simple macro model of n-channel MOSFET with dual workfunction gate (DWFG) structure is proposed. The DWFG MOSFET has higher transconductance and lower drain conductance than conventional MOSFET. Thus analog circuit design using the DWFG MOSFET can improve circuit characteristics. Currently, device models of the DWFG MOSFET are insufficient, so simple series connected two MOSFET model is proposed. In addition, a two stage operational amplifier using the proposed DWFG MOSFET macro model is designed to verify the model.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.385-393
• /
• 2021

Reinforcement corrosion is the main cause of the durability failure of reinforced concrete (RC) structure. In this paper, a three-dimensional (3D) numerical model of macro-cell corrosion is established to reveal the corrosion mechanisms of steel reinforcement in RC structure. Modified Direct Iteration Method (MDIM) is employed to solve the system of partial differential equations for reinforcement corrosion. Through the sensitivity analysis of electrochemical parameters, it is found that the average corrosion current density is more sensitive to the change of cathodic Tafel slope and anodic equilibrium potential, compared with the other electrochemical parameters. Furthermore, both the anode-to-cathode (A/C) ratio and the anodic length have significant influences on the average corrosion current density, especially when A/C ratio is less than 0.5 and anodic length is less than 35 mm. More importantly, it is demonstrated that the corrosion rate of semi-circumferential corrosion is much larger than that of circumferential corrosion for the same A/C ratio value. The simulation results can give a unique insight into understanding the detailed electrochemical corrosion processes of steel reinforcement in RC structure for application in service life prediction of RC structures in actual civil engineer.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.50-55
• /
• 2016

In order to make a highly ordered three-dimensionally macro-porous structure of zirconia ceramics, porogen precursors PMMA beads were prepared by emulsion polymerization using acrylic monomer. The monodisperse PMMA latex beads were closely packed by centrifugation as a porogen template for the infiltration of zirconium acetate solution. The mixed compound of PMMA and zirconium acetate was dried. According to the firing schedule, dry compacts of PMMA and zirconium acetate were calcined at $475^{\circ}C$ to obtain micro-, macro-, and meso- structures of polycrystalline zirconia with monodispersed porosity. Inorganic frameworks composed of $ZrO_2$ were formed and showed a three Dimensionally Ordered Microstructure [3DOM] of $ZrO_2$ ceramics. The obtained $ZrO_2$ skeleton was calcined at $710^{\circ}C$. The 3DOM $ZrO_2$ skeleton showed color tuning in solutions such as deionized [DI] $H_2O$ and/or methanol. The monodispersed crystalline micro-structure with micro/meso porosity was observed by FE-SEM.

• 열처리공학회지
• /
• 제5권2호
• /
• pp.95-102
• /
• 1992

In this study, we tried to describe the quantitative model of TiN film structure which was deposited by PECVD process. The macro-grain growth behavior was studied at the various deposition pressures and times. As a result, It was confirmed that TiN films had the typical Zone 1 structure, and macro-columnar grains were, without reference to the deposition pressure, grown ballistic type by the growth-death competition following the equation, $Y=aX^2$, approximately obtained by regression analysis. Also, the thickness and the crystallization of TiN thin films were increased, the chlorine contents were decreased according to the decreasing of deposition pressure.

• Coupled systems mechanics
• /
• 제8권2호
• /
• pp.111-127
• /
• 2019

In this paper, we present a 2D multi-scale coupling computation procedure for localized failure. When modeling the behavior of a structure by a multi-scale method, the macro-scale is used to describe the homogenized response of the structure, and the micro-scale to describe the details of the behavior on the smaller scale of the material where some inelastic mechanisms, like damage or plasticity, can be defined. The micro-scale mesh is defined for each multi-scale element in a way to fit entirely inside it. The two scales are coupled by imposing the constraint on the displacement field over their interface. An embedded discontinuity is implemented in the macro-scale element to capture the softening behavior happening on the micro-scale. The computation is performed using the operator split solution procedure on both scales.

• 한국기록관리학회지
• /
• 제8권2호
• /
• pp.89-104
• /
• 2008

캐나다 거시평가제도의 궁극적인 목표는 당대의 사회상을 기록을 통해 형성시키는 것이라 할 수 있다. 즉, 기록물이 생산되는 그 시대의 사회구조 속에서 기록물이 갖게 되는 의미를 평가하는데 목적이 있다. 이렇게 사회에 가장 큰 영향을 주고받는 조직체는 '정부'라는 유기체로 파악하고, 이를 문서화하기 위해서는 정부의 기능분석을 강조한다. 따라서 거시평가 제도는 기능분석을 통해서 가장 중요한 기능을 수행하는 부서인 OPI를 식별하는 것이 핵심이다. 또한 국가와 시민과의 상호작용에 대한 거버넌스 연구를 진행한다. 이러한 연구를 바탕으로 비로소 거시평가 가설이 형성되고, 기록을 통해서 이를 검증하는 단계가 거시평가의 방법론이라고 할 수 있다. 본 논문은 현대 평가의 주류를 이루고 있는 거시평가 방법론에 주목하여, 캐나다에서 실제로 실행되고 있는 거시평가의 제도분석을 목적으로 한다. 이를 위해서 캐나다 국립기록청에서 발행한 정부기록처분프로그램 관련 문건과 논문을 분석함으로서, 실제로 평가가 이루어지는 구체적인 과정을 살펴보고자 한다. 또한 한국의 평가 제도를 분석하여 문제점을 밝히고, 캐나다의 평가제도에서 벤치마킹할 수 있는 부분을 도출하였다.

• 가정과삶의질연구
• /
• 제26권1호
• /
• pp.51-67
• /
• 2008

The study analyzes divorce rates in Korea and makes suggestions for the future research of divorce rates. Based on the data from Korea Statistical Information System (KOSIS) of the National Statistics Organization, trends for divorce rates change and the relations between divorce rates and macro environmental factors are analyzed. Macro environmental factors include socioeconomic factors such as, Korean War, Vietnam War, oil shock, IMP economic crisis and gross national income (GNI), whereas demographical factors include population structure, rates of female labor participation, and geographical location. The principle characteristics of divorce rates are as follows: 1) the Crude divorce rates (CDR) and the number of divorced had been increased from 1970 to 2004, then the trend changed to a decrease; 2) the slope of the change were the highest during 1998 to 2004 after the IMP economic crisis. The relations between socioeconomic factors are as follows: 1) during the war there was a small increase of CDR for a short period of time; 2) the economic crisis of the nation tend to increase the CDR, while the IMP economic crisis had a strong impact on an increase of CDR because of the interaction effect among the population structure, women's sex role changes as well as the level of standard of living. The increase in CDR from 1990 to 2000 can be explained partly by the population of baby Boomers passing through their marriage and divorce process. The number of population residing in the rural area and the middle class households, and the mobility of population also had an impact on the divorce rates changes. The recommendations for the future research were as follows: 1) the need to develop new divorce statistics that are based on a marriage cohort or a birth cohort because family behavior is a mixture of personal, social and political responses, and because CDR is not an accurate measure of divorce rate since it was influenced by population structure; 2) the need to include micro personal factors as well as macro social factors in a model to find an interaction effect between those variables.

• 한국환경과학회지
• /
• 제18권5호
• /
• pp.561-567
• /
• 2009

The distribution of benthic macroinvertebrates of Shinbulsan wetland was investigated. This study was focused on the degree of recovery of habitat by comparing the community structure of benthic macro invertebrates of zone D to that of zone A, intact habitat. The zone D was destructed due to the construction of a golf club and the survey was performed in zone A and zone D of Shinbulsan wetland. The seasonal survey was performed in April, July and September from 2006 to 2007. From the sampling, 2 phyla, 3 classes, 9 orders, 31 families, 69 species and 1155 individuals of benthic macroinvertebrates were collected. From zone A, 2 phyla, 3 classes, 9 orders, 23 families, 54 species and 678 individuals were identified. From zone D, 2 phyla, 3 classes, 9 orders, 23 families, 43 species and 477 individuals were identified. Species diversity and species richness were higher in zone A than in zone D. The recovery of zone D was inefficient as humidity of soil was not enough to live macroinvertebrates. Also, an endangered species of macroinvertebrates, Nannophya pygmaea was found during this investigation.

• 한국분말재료학회지
• /
• 제26권6호
• /
• pp.502-507
• /
• 2019

Macro-porous carbon foams are fabricated using cured spherical phenolic resin particles as a matrix and furfuryl alcohol as a binder through a simple casting molding. Different sizes of the phenolic resin particles from 100-450 ㎛ are used to control the pore size and structure. Ethylene glycol is additionally added as a pore-forming agent and oxalic acid is used as an initiator for polymerization of furfuryl alcohol. The polymerization is performed in two steps; at 80℃ and 200℃ in an ambient atmosphere. The carbonization of the cured body is performed under Nitrogen gas flow (0.8 L/min) at 800℃ for 1 h. Shrinkage rate and residual carbon content are measured by size and weight change after carbonization. The pore structures are observed by both electron and optical microscope and compared with the porosity results achieved by the Archimedes method. The porosity is similar regardless of the size of the phenolic resin particles. On the other hand, the pore size increases in proportion to the phenol resin size, which indicates that the pore structure can be controlled by changing the raw material particle size.