• Journal of Korea Foundry Society
• /
• v.32 no.6
• /
• pp.269-275
• /
• 2012

Al-Mg-Si/Al hybrid alloy was prepared by Duo-casting and the mechanical behavior was evaluated based on their microstructure and mechanical properties. The hybrid aluminum alloy included the Al-Mg-Si alloy with fine eutectic structure, pure Al with the columnar and equiaxed crystals, and the macro-interface existing between Al-Mg-Si alloy and pure Al. The growth of columnar grains in pure Al occurred from the macro-interface. The tensile strength, 0.2% proof stress and bending strength of the hybrid aluminum alloy were almost similar to those of pure Al, and the elongation was much higher than the Al-Mg-Si alloy. The fracture of the hybrid alloy took place in pure Al side, indicating that the macro-interface was well bonded and the mechanical behavior strongly depends on the limited deformation in pure Al side.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.8
• /
• pp.582-586
• /
• 2013

In this paper, a simple macro model of n-channel MOSFET with dual workfunction gate (DWFG) structure is proposed. The DWFG MOSFET has higher transconductance and lower drain conductance than conventional MOSFET. Thus analog circuit design using the DWFG MOSFET can improve circuit characteristics. Currently, device models of the DWFG MOSFET are insufficient, so simple series connected two MOSFET model is proposed. In addition, a two stage operational amplifier using the proposed DWFG MOSFET macro model is designed to verify the model.

• Computers and Concrete
• /
• v.27 no.4
• /
• pp.385-393
• /
• 2021

Reinforcement corrosion is the main cause of the durability failure of reinforced concrete (RC) structure. In this paper, a three-dimensional (3D) numerical model of macro-cell corrosion is established to reveal the corrosion mechanisms of steel reinforcement in RC structure. Modified Direct Iteration Method (MDIM) is employed to solve the system of partial differential equations for reinforcement corrosion. Through the sensitivity analysis of electrochemical parameters, it is found that the average corrosion current density is more sensitive to the change of cathodic Tafel slope and anodic equilibrium potential, compared with the other electrochemical parameters. Furthermore, both the anode-to-cathode (A/C) ratio and the anodic length have significant influences on the average corrosion current density, especially when A/C ratio is less than 0.5 and anodic length is less than 35 mm. More importantly, it is demonstrated that the corrosion rate of semi-circumferential corrosion is much larger than that of circumferential corrosion for the same A/C ratio value. The simulation results can give a unique insight into understanding the detailed electrochemical corrosion processes of steel reinforcement in RC structure for application in service life prediction of RC structures in actual civil engineer.

• Journal of the Korean Ceramic Society
• /
• v.53 no.1
• /
• pp.50-55
• /
• 2016

In order to make a highly ordered three-dimensionally macro-porous structure of zirconia ceramics, porogen precursors PMMA beads were prepared by emulsion polymerization using acrylic monomer. The monodisperse PMMA latex beads were closely packed by centrifugation as a porogen template for the infiltration of zirconium acetate solution. The mixed compound of PMMA and zirconium acetate was dried. According to the firing schedule, dry compacts of PMMA and zirconium acetate were calcined at $475^{\circ}C$ to obtain micro-, macro-, and meso- structures of polycrystalline zirconia with monodispersed porosity. Inorganic frameworks composed of $ZrO_2$ were formed and showed a three Dimensionally Ordered Microstructure [3DOM] of $ZrO_2$ ceramics. The obtained $ZrO_2$ skeleton was calcined at $710^{\circ}C$. The 3DOM $ZrO_2$ skeleton showed color tuning in solutions such as deionized [DI] $H_2O$ and/or methanol. The monodispersed crystalline micro-structure with micro/meso porosity was observed by FE-SEM.

• Journal of the Korean Society for Heat Treatment
• /
• v.5 no.2
• /
• pp.95-102
• /
• 1992

In this study, we tried to describe the quantitative model of TiN film structure which was deposited by PECVD process. The macro-grain growth behavior was studied at the various deposition pressures and times. As a result, It was confirmed that TiN films had the typical Zone 1 structure, and macro-columnar grains were, without reference to the deposition pressure, grown ballistic type by the growth-death competition following the equation, $Y=aX^2$, approximately obtained by regression analysis. Also, the thickness and the crystallization of TiN thin films were increased, the chlorine contents were decreased according to the decreasing of deposition pressure.

• Coupled systems mechanics
• /
• v.8 no.2
• /
• pp.111-127
• /
• 2019

In this paper, we present a 2D multi-scale coupling computation procedure for localized failure. When modeling the behavior of a structure by a multi-scale method, the macro-scale is used to describe the homogenized response of the structure, and the micro-scale to describe the details of the behavior on the smaller scale of the material where some inelastic mechanisms, like damage or plasticity, can be defined. The micro-scale mesh is defined for each multi-scale element in a way to fit entirely inside it. The two scales are coupled by imposing the constraint on the displacement field over their interface. An embedded discontinuity is implemented in the macro-scale element to capture the softening behavior happening on the micro-scale. The computation is performed using the operator split solution procedure on both scales.

• Journal of Korean Society of Archives and Records Management
• /
• v.8 no.2
• /
• pp.89-104
• /
• 2008

The final goal of the macro appraisal model of Canada is that the figure of society of the day is made by the record. The goal is that we evaluate the meaning documentary have in the social structure of the day to produce records. The organization to be affected much the society is recognized as the organism, 'Government' and the function analysis of the government is emphasized in order to be the documentation. Therefore, it is essential in the macro appraisal model that OPI, the department to carry out the very important function is identified. Also the research of governance about interaction of country and citizen is studied. Based on these studies, the macro appraisal theory is made and it can be macro appraisal methodology that these theory is verified through records. the government of Canada have operated macro appraisal model reflected the figure of the society since 1990's, on adapting the change of the record production of modern. This model of Canada is systemized concretely and the government of Australia introduced the model benchmarking the Canada's. The England and the Holland is bringing up the result of the project introduced the macro appraisal method. Therefore the macro appraisal is the method and the theory noticed globally in the field of appraisal of modern. Throughout the analysis of the macro appraisal system of Canada, how to select the record reflected the figure of the society is proposed, and concrete practice is also present, and concrete practice is also present. Also the improvement method of the appraisal system in Korea is considered.

• Journal of Families and Better Life
• /
• v.26 no.1
• /
• pp.51-67
• /
• 2008

The study analyzes divorce rates in Korea and makes suggestions for the future research of divorce rates. Based on the data from Korea Statistical Information System (KOSIS) of the National Statistics Organization, trends for divorce rates change and the relations between divorce rates and macro environmental factors are analyzed. Macro environmental factors include socioeconomic factors such as, Korean War, Vietnam War, oil shock, IMP economic crisis and gross national income (GNI), whereas demographical factors include population structure, rates of female labor participation, and geographical location. The principle characteristics of divorce rates are as follows: 1) the Crude divorce rates (CDR) and the number of divorced had been increased from 1970 to 2004, then the trend changed to a decrease; 2) the slope of the change were the highest during 1998 to 2004 after the IMP economic crisis. The relations between socioeconomic factors are as follows: 1) during the war there was a small increase of CDR for a short period of time; 2) the economic crisis of the nation tend to increase the CDR, while the IMP economic crisis had a strong impact on an increase of CDR because of the interaction effect among the population structure, women's sex role changes as well as the level of standard of living. The increase in CDR from 1990 to 2000 can be explained partly by the population of baby Boomers passing through their marriage and divorce process. The number of population residing in the rural area and the middle class households, and the mobility of population also had an impact on the divorce rates changes. The recommendations for the future research were as follows: 1) the need to develop new divorce statistics that are based on a marriage cohort or a birth cohort because family behavior is a mixture of personal, social and political responses, and because CDR is not an accurate measure of divorce rate since it was influenced by population structure; 2) the need to include micro personal factors as well as macro social factors in a model to find an interaction effect between those variables.

• Journal of Environmental Science International
• /
• v.18 no.5
• /
• pp.561-567
• /
• 2009

The distribution of benthic macroinvertebrates of Shinbulsan wetland was investigated. This study was focused on the degree of recovery of habitat by comparing the community structure of benthic macro invertebrates of zone D to that of zone A, intact habitat. The zone D was destructed due to the construction of a golf club and the survey was performed in zone A and zone D of Shinbulsan wetland. The seasonal survey was performed in April, July and September from 2006 to 2007. From the sampling, 2 phyla, 3 classes, 9 orders, 31 families, 69 species and 1155 individuals of benthic macroinvertebrates were collected. From zone A, 2 phyla, 3 classes, 9 orders, 23 families, 54 species and 678 individuals were identified. From zone D, 2 phyla, 3 classes, 9 orders, 23 families, 43 species and 477 individuals were identified. Species diversity and species richness were higher in zone A than in zone D. The recovery of zone D was inefficient as humidity of soil was not enough to live macroinvertebrates. Also, an endangered species of macroinvertebrates, Nannophya pygmaea was found during this investigation.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.502-507
• /
• 2019

Macro-porous carbon foams are fabricated using cured spherical phenolic resin particles as a matrix and furfuryl alcohol as a binder through a simple casting molding. Different sizes of the phenolic resin particles from 100-450 ㎛ are used to control the pore size and structure. Ethylene glycol is additionally added as a pore-forming agent and oxalic acid is used as an initiator for polymerization of furfuryl alcohol. The polymerization is performed in two steps; at 80℃ and 200℃ in an ambient atmosphere. The carbonization of the cured body is performed under Nitrogen gas flow (0.8 L/min) at 800℃ for 1 h. Shrinkage rate and residual carbon content are measured by size and weight change after carbonization. The pore structures are observed by both electron and optical microscope and compared with the porosity results achieved by the Archimedes method. The porosity is similar regardless of the size of the phenolic resin particles. On the other hand, the pore size increases in proportion to the phenol resin size, which indicates that the pore structure can be controlled by changing the raw material particle size.