• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.379-386
• /
• 2003

Statement of problem. Resin cements are widely used in adhesive dentistry specially on all ceramic restorations. It is needed to find out adequate bonding strength between different porcelain surface treatments, commercially available porcelains, and different resin cement systems. Purpose. The purpose of this study was to evaluate shear bond strength of resin cements bonded to porcelains in three different modalities; 5 different porcelain surface treatments, 3 different resin cement systems and 3 different commercially available pressable porcelains. Material and Method. This study consisted of 3 parts. Part I examined the effect of five different surface treatments on the pressable porcelain. Fifty discs (5 mm in diameter and 3 mm in height) of Authentic porcelain were randomly divided into 5 groups (n = 10). The specimens were sanded with 320 grit SiC paper followed by 600 grit SiC paper. The specimens were treated as follow: Group 1-Sandblasting (aluminum oxide) only, Group 2 - sandblasting/ silane, Group 3 - sandblasting/ acid etching/ silane, Group 4 - acid etching only, Group 5 - acid etching/ silane. Part II examined the shear bond strength of 3 different resin cement systems (Duolink, Variolink II, Rely X ARC) on acid etching/ silane treated Authentic pressable porcelain. Part 3 examined the shear bond strength of Duolink resin cement on 3 different pressable porcelains (Authentic, Empress I, Finesse). All cemented specimens were stored in distilled water for 2 hours and tested with Ultradent shear bond strength test jig under Universal Instron machine until fracture. An analysis of variance(ANOVA) test was used to evaluate differences in shear bond strength. Result. The shear bond strength test resulted in the following: (1) Acid etched porcelains recorded greater shear bond strength values to the sandblasted porcelains. (2) Silane treated porcelains recorded greater shear bond strength values to non-silane treated porcelains. (3) There was no significant difference between sandblasting/ acid etching/ silane treated and acid etching/ silane treated porcelains. However those values were much higher than other three groups. (4) The shear bond strength with Variolink II was lower than the value of Duolink or Rely X ARC. (5) The shear bond strength of Finesse was lower than the value of Authentic or Empress I.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.22 no.3
• /
• pp.80-94
• /
• 2009

Objective : The purpose of this clinical research is the investigation of the effects between acupuncture group(control group) and NURIEYE-1 group (experimental group) in myopia Methods : Comparison clinical study was conducted with the randomly arranged 32 patients for acupuncture group(control group) and NURIEYE-1 group(experimental group). For effectiveness evaluation, eye sight test, MQOL and DITI were tested three times with visits for every 4 weeks. With SAS, Statistical analysis was performed by using paired t-test and two sample t-test. Statistical significance was achieved with less than 5% probability (p<0.05). Result : 1. There was no significant effect from the eye sight comparison between the two group. We had improved results in average with MQOL, however, there was no statistical significance. Though there was also no significant result with DITI average comparison between two group, we witnessed significant effect in some part of MQOL. 2. Nevertheless Periodical comparison test showed weak significance with eye sight and DITI, significant effect was found in some part of MQOL. 3. With periodical comparison tests, there were significant effects in eye sight, MQOL and DITI with the experimental groups and control groups, respectively. Conclusion : There was no significant eye sight improvement. However, with acupuncture point stimulation, we think there are some positive effects for the relaxation of excessive stress in eyes.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.11a
• /
• pp.259-262
• /
• 2003

Group technology(GT) is a manufacturing philosophy which identifies and exploits the similarity of parts and processes in design and manufacturing. A specific application of GT is cellular manufacturing. the first step in the preliminary stage of cellular manufacturing system design is cell formation, generally known as a machine-part cell formation(MPCF). This paper presents and tests a grouping gentic algorithm(GGA) for solving the MPCF problem and uses the measurements of e(ficacy. GGA's replacement heuristic used similarity coefficients is presented.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.61
• /
• pp.41-50
• /
• 2000

Cell formation(CF) Is to group parts with similar geometry, function, material and process into part families, and the corresponding machines into machine cells. Cell formation solutions often contain exceptional elements(EEs). Also, the following objective functions - minimizing the total costs of dealing with exceptional elements and maximizing total similarity coefficients between parts - have been used in CF modeling. Thus, multiobjective programming approach can be developed to model cell formation problems with two conflicting objective functions. This paper presents an effective cell formation method with fuzzy multiobjective nonlinear mixed-integer programming simultaneously to form machine cells and to minimize the cost of eliminating EEs.

• IE interfaces
• /
• v.6 no.1
• /
• pp.31-45
• /
• 1993

Setup planning for machining processes is a part of fixture planning which is also a part of process planning. A setup of a part is defined as a group of features which are machined while the part is fixtured in one single fixture. Setup planning includes a number of tasks such as the selection of setup, sequence of setups and datum frame for each setup. Setup planning is an important function in fixture planning which must be able to support and to clamp a workpiece to prevent deflections caused by machining and clamping loads. This paper presents setup planning system using expert system approach(SPES) for prismatic parts which can be machined on vertical milling machine. SPES consists of preprocessing module and main processing module. Preprocessing module executes the conversion of feature data to frame type data and the determination of setups, and main processing module executes the determination of datum frame of each setup and sequance of setups. Preprocessing module is coded by C language and main processing module is a rule-based expert system using EXSYS pro. The performance of SPES is evaluated through case studies and the results show successful work except for operation sequence of machining holes. This is due to the limited rules for machining holes.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.143-151
• /
• 1996

The concept of cellular manufacturing is to decompose a manufacturing system into subsystems, which are easier to manage than the entire manufacturing system. The objective of cellular manufacturing is to group parts with similar processing requirements into part families and machines into cells which meet the processing needs of part families assigned to them. This paper presents a methodology for cell formation based on genetic algorithm which produces improved cell formation in terms of total moves, which is a weighted sum of both intercell moves and intracell moves. A sample problem is solved for two, three and four cells with an approach based on genetic algorithms.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.2
• /
• pp.23-34
• /
• 1993

Although there are numerous studies that address the problem of optimal machine grouping and part family classification for cellular manufacturing, little research has been reported that studies the conditions where cellular manufacturing is appropriate. This paper, in order to evaluate and compare the job shop with the GT cellular shop, the performance of those shops were simulated by using SIMAN. We tested the effect of independent variables including changes of product demands, intercell flow level, group setup time, processing time variability, variety of material handling systems, and job properties (ratio of processing time and material handling time). And also performance measures (dependent variables), such as machine utilization, mean flow time, average waiting time, and throughput rate, are discussed. Job shop model and GT cellular shop written in SIMAN simulation language were used in this study. These systems have sixteen machines which are aggregated as five machine stations using the macro feature of SIMAN. The results of this research help to better understand the effect of production factors on the performance of cellular manufacturing systems and to identify some of the necessary conditions required to make these systems perform better than traditional job shops. Therefore, this research represents one more step towards the characterization of shops which may benefit from cellular manufacturing.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.10
• /
• pp.11-21
• /
• 2018

In this paper we propose a novel log template discovery algorithm which achieves high quality of discovered log templates through iterative log filtering technique. Log templates are the static string pattern of logs that are used to produce actual logs by inserting variable values during runtime. Identifying individual logs into their template category correctly enables us to conduct automated analysis using state-of-the-art machine learning techniques. Our technique looks at the group of logs column-wise and filters the logs that have the value of the highest proportion. We repeat this process per each column until we are left with highly homogeneous set of logs that most likely belong to the same log template category. Then, we determine which column is the static part and which is the variable part by vertically comparing all the logs in the group. This process repeats until we have discovered all the templates from given logs. Also, during this process we discover the custom patterns such as ID formats that are unique to the application. This information helps us quickly identify such strings in the logs as variable parts thereby further increasing the accuracy of the discovered log templates. Existing solutions suffer from log templates being too general or too specific because of the inability to detect custom patterns. Through extensive evaluations we have learned that our proposed method achieves 2 to 20 times better accuracy.

• Journal of Technologic Dentistry
• /
• v.29 no.2
• /
• pp.79-85
• /
• 2007

In this study, We tried to find out the fracture strength of zirconia coping all ceramic crown and collarless porcelain fused gold alloy crown as the compared group. Each of the collarless porcelain fused gold crown and zirconia all ceramic crown has been produced specimen 10 each. And after pasting them on the steel jig, it had load given at porcelain incisal edge by 130$^{\circ}$ and measured fracture strength by Universal Testing Machine and then We have results from that. 1. The average value of fracture strength suggested 950.49 N at collarless porcelain fused gold alloy crown, 656.81 N at zirconia coping all ceramic crown. 2. Fractured pattern showed that the whole of labial part was exposed in collarless porcelain fused gold crown, but porcelain of margin part did not show fracture in advance. In the practice, the concern that collarless might cause fracture strength to be weaken does not matter, we concluded zirconia all ceramic crown made fracture that only a part of labial porcelain was fractured. The combination of zirconia all ceramic crown and turned out to be excellent.

• Journal of Welding and Joining
• /
• v.32 no.4
• /
• pp.39-45
• /
• 2014

Today, the development of digitized information media and info-communications are bringing many changes. Due to the development of IT thechnology, we can learn wherever, whenever, regardless of time and place. Machine drawing subject is a very important in mechanical engineering course, but it's studyed only basic theory in a short period, average 1~2weeks. So that, students think that the mechanical drawing is of minor importance. Such ideas make them difficult to impove sense of space in isometric drawing and drawing skill. Therefore, in this paper, augmented reality-based contents through the system, Mechanical Drawing of education to meet the effectiveness and satisfaction, student learning can be spontaneously it was construct self-system. And, Theoretical part of the Mechanical Drawing is proposed ensure more efficient and easier training. In this paper, we were test operation for user effectualness of proposed service at Korea Polytechnics Colleges a industrial facilities management in Daegu. Target user are 66 students, and The students were divided into experimental group and comparison group. Experimental results, experimental group was able to do systematically experience many Projection Drawing and Pictorial Drawing in short schooltime. And, The test operation results showed that have the possibility to meet education effectiveness and user satisfaction in this augmented reality-based contents system.