• Journal of Preventive Medicine and Public Health
• /
• v.21 no.2 s.24
• /
• pp.271-283
• /
• 1988

A Fourier transform infrared spectrophotometric method was described for the determination of quartz, mica(sericite) and feldspar(potassium feldspar) in respirable dust in Taebaek area. The results were as follows; 1) The concentration of minerals were determined from the intensity of absorption peak of quartz at $799cm^{-1}$, sericite at $539cm^{-1}$, and potassium feldspar at $648cm^{-1}$ respectively. 2) The precision(C. V. %) for the quartz determination was $7.70{\pm}2.68%$ from 10 to $200{\mu}g$ of quartz. 3) The precision for the sericite determination was $16.34{\pm}6.82%$ from 30 to $500{\mu}g$ of serictite. 4) The precision for the potassium feldspar determination was $5.28{\pm}1.74%$ from 30 to $500{\mu}g$ of potassium feldspar. 5) The concentration of respirable dust in Taebaek area was $4.90{\pm}3.29mg/m^3$ (0.4-93.7%), percent quartz was $1.80{\pm}4.14%$ (0.01-20.56%), percent sericite was $11.37{\pm}6.43%$ (0.00-29.69%), percent potassium feldspar was 8.15% (n=7, 3.41-19.70%). 6) The difference of respirable coal dust, quartz, and sericite concentrations in drilling, coal cutting, hauling and seperating was significant respectively (p<0.05).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.255-256
• /
• 2006

The electrical properties of viologen ($VC_8SH$) were studied in terms of the tunneling current characteristics using self-assembling techniques and ultra high vacuum scanning tunneling microscopy (UHV-STM). We fabricated the Au substrate were deposited by thermal evaporation system($420^{\circ}C$). Self-assembled monolayers (SAMs) were prepared on Au(111), which had been thermally deposited onto freshly cleaved, heated mica. The Au substrate was exposed to a 1 mM/L solution of Octanethiol in ethanol for 24 h to form a monolayer. After through rinsing the sample, it was exposed to a 0.1 mM/L solution of $VC_8SH$ in ethanol for 30 min. We measurement of the morphology on the single viologen molecule. The current-voltage (I-V) properties were measured at arbitary configured points on the surface of the sample by using a STS.

• Advances in Traditional Medicine
• /
• v.7 no.4
• /
• pp.441-443
• /
• 2007

A preliminary in vitro acid neutralizing capacity test of twelve traditional Ayurvedic antacids were performed in this study. Five traditional preparations of ash of conch shell, ash of oyster, ash of pearl, limestone, and ash of cowrie showed high acid neutralizing capacity similar to standard antacid combination of $Al(OH)_3\;and\;Mg(OH)_2$. Among these the ash of conch shell found the highest acid neutralizing capacity. The ash of tamarind and ash of Achyranthus aspera showed moderate acid neutralizing capacity. The acid neutralizing capacity of red ochre; ash of iron; mixture of niter, alum and ammonium chloride; saltpeter; and ash of mica found below the USP 23 limit.

• Electrical & Electronic Materials
• /
• v.1 no.2
• /
• pp.115-125
• /
• 1988

지금까지 발전기 전동기 및 전력용 변합기와 같은 중전기에 사용되고 있는 복합절연재료인 유리섬유 강화프라스틱은 단가가 높고, 기계적 특성이 비등방성이며 기게적 응력이나 서어비스 중에 계면보이드의 발생으로 문제성이 제기되어 왔다. 이러한 결점을 해소하기 위하여 플레이크상의 필라에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 대표적인 플레이크상 재료인 마이카를 이용하여 현재 대형 발전기나 전동기의 고정자 권선 절연용으로 연구 개발되고 있는 마이카 페이프/에폭시 복합재료를 제작한 후, 이 재료의 전기적 및 기계적 특성과 최적 제작조건 등에 실험적으로 고찰하였다. 특히 아미노 실란 게면 결합제를 필라에 적용하여 시료의 전기적 및 기계적 특성에 미치는 효과를 검토하였다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.116-119
• /
• 2003

$Ni_2$MnGa films, deposited on mica and glass substrates, were studied by ferromagnetic resonance (FMR) technology. The temperature-dependent resonance field was measured and a martensitic phase transformation (MT) was found between 310 and 340 K, exhibiting an abnormality on the curve. The easy axis is found to be in the film plane. The line width increases as a whole with decreasing temperature, which is discussed in terms of the motional narrowing mechanism. The resonance field was also measured as a function of orientation and the results were fitted, exhibiting a good consistence.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.127-142
• /
• 2000

The charged cluster model states that chemical vapor deposition (CVD) begins with gas phase nucleation of charged clusters followed by cluster deposition on a substrate surface to form a thin film. A two-chambered CVD system, separated by a 1-mm orifice, was used to study gold deposition by thermal evaporation in order to determine if the CCM applies in this case. At a filament temperature of 1523 and 1773 K, the presence of nano-meter sized gold clusters was found to be positive and the cluster size and size distribution increased with increasing temperature. Small clusters were found to be amorphous and they combined with clusters already deposited on a substrate surface to form larger amorphous clusters on the surface. This work revealed that gold thin films deposited on a mica surface are the result of the sticking of 4-10 nm clusters. The topography of these films was similar to those reported previously under similar conditions.

• The Journal of Engineering Geology
• /
• v.18 no.2
• /
• pp.159-166
• /
• 2008

We have a question about the changing possibility of orientation of discontinuities through the depth of under-ground. To know this, the data from Honam coalfield composed of shale, sandstone and coal and Suwon area which crops out mica schist, were analyzed the discontinuities measured by BIPS and Televiewer. In Honam coalfield the orientations of joints are changed at 30-40 m depth of underground and in Suwon area they are changed around 20 m depth. To compared the results from Honanam coalfield and Suwon area, there are different rock type and geologic structure. However, the attitude of the discontinuities are changing at 20-30 m depth of underground.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.91-92
• /
• 2006

The electrical properties of viologen derivatives were studied in terms of the tunneling current characteristics on the length of the viologen derivatives using self-assembling techniques and ultra high vacuum scanning tunneling microscopy (UHV-STM). We fabricated the Au substrate were deposited by thermal evaporation system ($420^{\circ}C$. Self-assembled monolayers (SAMs) were prepared on Au (111), which had been thermally deposited onto freshly cleaved, heated mica. The Au substrate was exposed to a 1 mM solution of viologen derivatives in ethanol for 24 hours to form a monolayer. We measurement of the morphology on the single viologen molecules ($VC_{8}SH$, $VC_{10}SH$, $HSC_{8}VC_{8}SH$, and $HSC_{10}VC_{10}SH$). The current-voltage (I-V) and differential conductance (dl/dV-V) properties were measured while the electrical properties of the formed monolayer were scanned by using a STS. The effective barrier height of viologen derivatives ($VC_{8}SH$, $VC_{10}SH$, $HSC_{8}VC_{8}SH$, and $HSC_{10}VC_{10}SH$) were calculated to be 1.076 eV, 1.56 ${\pm}$ 0.3 eV, 1.85 eV, 2.28 eV, respectively.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.7
• /
• pp.41-47
• /
• 2014

The on-line partial discharge (PD) in stator windings of air-cooled gas turbine (GT) generator (119.2MVA, 13.8kV) is measured and analyzed in this paper. This generator was designed by global vacuum pressure impregnation (VPI). The generator failed two times at top bar (16T) of phase B in the stator slot. Six epoxy-mica capacitors were installed in three phases of GT generator. On-line PD test was performed on GT generator using turbine generator analyzer (TGA). TGA showed that the normalized quantity number (NQN) and the PD magnitude($Q_m$) were high in phase B. Internal discharges were generated in phases A, B and C. The trend analysis of NQN and $Q_m$ value are obtained in order to monitor the insulation condition in GT generator stator windings. Phases A and C were in good condition. But phase B had deteriorated significantly

• The Journal of the Petrological Society of Korea
• /
• v.16 no.2 s.48
• /
• pp.47-58
• /
• 2007

This study examines the distribution of basement rocks in Gyochon-ri, Muan-eup, Muan-gun, Jeonnam where ground subsidence occurred in June 2005, and traces corrosion of limestone. Mica schist and rhyolite are distributed in the surface of the study area, but thick limestone layer with large and small caverns are distributed underground. A horizon of limestone with maximum width of 300 m and 4 km of length was found along the detour which is in the north of pound subsidence. Such identification of limestone presence would be very useful to predict potential ground subsidence. Limestone in this area was disturbed by fold and fault due to severe shearing deformation. Small caverns were frequently found in anticline part of folds formed in limestone layer. Schists with different thicknesses were intercalated in the limestone with shearing deformation and consist of sheet silicate minerals (chlorite and mica) and quartz. In sections of weathered specimen, it is shown that biotite of schist part was altered into chlorite and corrosion of calcite around the schist followed. This suggest that ground water permeated between intercalated sheet silicate minerals and corrosion of limestone began. And small caverns were generated where active corrosion occurred. This study suggests that because of many reasons (for instance, reclamation of the Bulmu reservior and excess pumping), cavern water level was lowered and cave sediments were removed, and it caused ground subsidence to occur.