• Nonlinear Functional Analysis and Applications
• /
• 제26권4호
• /
• pp.685-700
• /
• 2021

In this paper, we discuss the existence and uniqueness of fixed point and common fixed point theorems in complex valued extended b-metric spaces for a pair of mappings satisfying some rational contraction conditions which generalized and unify some well-known results in the literature.

• Nonlinear Functional Analysis and Applications
• /
• 제26권5호
• /
• pp.949-959
• /
• 2021

In this paper, some fixed point theorems for new type of (𝜉, 𝛽)-expansive mappings of type (S) and type (T) using control function and 𝛽-admissible function in 𝒢-metric spaces are proved. Further, we prove certain fixed point results by relaxing the continuity condition.

• Nonlinear Functional Analysis and Applications
• /
• 제28권2호
• /
• pp.311-335
• /
• 2023

Fixed point theory is the center of focus for many mathematicians from last few decades. A lot of generalizations of the Banach contraction principle have been established. In this paper, we introduce the concepts of 𝜃-contraction and 𝜃-𝜑-contraction in quasi-metric spaces to study the existence of the fixed point for them.

• 대한물리치료과학회지
• /
• 제4권1호
• /
• pp.243-253
• /
• 1997

The purpose of this study was to determine the effect of systolic blood pressure, heart rate and myocardial oxygen consumption on 3-point nonweight bearing ambulation with axillary wooden crutch according to age. The subjects were fifty healty volunteers(22 male, 28 female), ages from 20 to 69(mean age of 43.8 years) with no history of cardiovascular or respiratory disease, diabetes mellitus, arthritis and orthopedic disorder within the past three years. This study was carried out from May 10 to August 10, 1996. The data were analyzed by percentage, mean and standard deviation and ANOVA. The results were as follows : 1. In systolic blood pressure(SBP), there was no significantly change between before walk and after 20 m in crutch walking with age, however, there did differ significantly after 40 m and 60 m in crutch walking(p<0.01, p<0.001). 2. In heat rate(HR), there was no significantly change between before walk and after 20 m, 40 m in crutch walking with age, however, there did differ significantly after 60 m in crutch walking(p<0.05). 3. In myocardial oxygen consumption($MVO_{2}$), there was no significantly change between before walk and after 20m in crutch walking with age, however, there did differ significantly after 40 m and 60 m in crutch walking(p<0.01, p<0.001). These result showed that cardiovascular system had a great effect on the olderly when 3-point nonweight bearing ambulation with axillary wooden crutch. Therefore, when train for axillary crutch in the olderly, we needed suitably basis of walking distance.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.346-349
• /
• 2013

본 논문에서는 MPPT(Maximum Power Point Tracking) 제어기능을 갖는 빛, 진동 그리고 열 에너지를 이용한 삼중입력 에너지 하베스팅 회로를 설계하였다. 설계된 회로는 MPPT 제어를 통해 솔라셀과 압전소자 그리고 열전소자로부터 최대 가용 전력을 수확하고, 수확된 에너지를 저장 커패시터에 병합하여 저장한다. 병합된 에너지는 PMU(Power Management Unit)를 통해 센서노드로 공급된다. MPPT 제어는 변환소자의 개방회로전압과 MPP(Maximum Power Point) 전압간의 비례관계를 이용하여 구현하였다. 제안된 회로는 $0.18{\mu}m$ CMOS 공정으로 설계하였으며, 모의실험을 통해 동작을 검증하였다. 설계된 에너지 하베스팅 회로의 칩 면적은 $945{\mu}m{\times}995{\mu}m$이다.

• 충청수학회지
• /
• 제36권2호
• /
• pp.93-97
• /
• 2023

Let f : M → M be a diffeomorphism of two dimensional manifold M. If f has a homoclinic tangency associated to a hyperbolic periodic point p then there is a diffeomorphism g : M → M with C¹ close to f such that g is not continuum-wise expansive.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.277-295
• /
• 1997

After clinical adjustment of dental casting restoration, re-polishing procedure is recommanded because the smooth gold sureface is lost. But there is the possibility to get more loose contact than that intended by loss of gold alloy according to the kinds of polishing materials and polishing time. Therefore in this study I polished type II gold alloy with 390gm force, 20,000rpm speed, and 8 kinds of gold alloy polishing materials, fabricated by 4 companies and then measured the amount of loss of gold alloy with Surfcorder SEF-30D and observed alloy surfaces polished by 3 brown rubber points with SEM. The amount of loss of gold alloys polished with 8 kinds of polishing materials and the degree of smoothness of gold alloys according to polishing time and polishing materials were compared. The following results were obtained : 1. When the amount of loss of gold alloys polished with 3 kinds of brown rubber point was compared, Alphalex brown point had the most amount of alloy loss, followed in decreasing order by Shofu brown point and Eveflex brown point. There was statistically significant difference in the amount of alloy loss according to polishing materials. 2. When the amount of loss of gold alloys polished with 5 kinds of green rubber point was compared, Shofu green point had the most amount of alloy loss, followed in decreasing order by Alphaflex green point, Dedeco green clasp polisher, and Eveflex green point. There was statistically significant difference in the amount of alloy loss according to polishing materials except Alphaflex green point and Dedeco green clasp polisher. 3. When the amount of loss of gold alloys polished with all kinds of rubber point was compared, there was no significant difference in Eveflex brown point, Alphaflex green point, and Dedeco green clasp polisher. 4. When average amount of alloy loss per 1 revolution by polishing materials was compared, Alphalex brown point had the greatest value as $0.329{\mu}m$ and Shofu supergreen point had the lowest value as $0.022{\mu}m$. 5. When the degree of sureface smoothness of gold alloy polished with 3 kinds of brown rubber point was compared, In Alphalex brown point surface roughness was completely lost after 20 seconds polishing time, in Shofu brown point 30 seconds, in Eveflex brown point 40 seconds. But in every gold alloys fine scratch formed by rubber points was observed. Based on the results of this study, as rubber polishing materials used in polishing of dental casting restoration after clinical adjustment influenced on the tightness of occlusal or proximal contact, we should make dental casting restoration with minimum error through careful laboratory procedure and form very smooth surface of restoration with tripoli and rouge after use of silicone polishing materials.

• 대한원격탐사학회지
• /
• 제35권5_1호
• /
• pp.705-714
• /
• 2019

고해상도 UAV 영상의 다양한 활용을 위해서는 정밀한 위치보정이 필요하다. 이를 위해 지상기준점을 선정하는 것이 일반적이지만 긴급상황이나 지상기준점 선정이 어려운 경우에는 지상기준점없이 촬영을 수행해야 한다. 본연구에서는 지상기준점 없이 생성된 UAV 기반 3차원 point cloud 데이터의 x, y 좌표에 대한 위치 정확도 향상방법을 제안하였다. 위치정확도 향상을 위한 기준 데이터로 공공데이터포털에서 제공하는 벡터파일 중 도로 정보를 이용하였다. 2차원 정사보정 영상의 기하보정을 먼저 수행하고, 이 과정에서 산출된 변환행렬을 3차원 point cloud에 적용하는 방법을 채택하였다. 보정 전 약 34.54 m의 직선 거리 차이가 보정 후 약 1.21 m 로 감소하였다. 지상기준점 선정없이 획득된 UAV영상의 2차원 및 3차원 영상의 위치정확도 향상이 가능함을 확인함에 따라 타 공간정보 데이터와의 연계 및 호환 등이 가능해져 point cloud 데이터에서 획득된 3차원 공간 객체의 활용 범위의 확대를 기대한다.

• Journal of applied mathematics & informatics
• /
• 제17권1_2_3호
• /
• pp.229-244
• /
• 2005

In this paper, we study the third order ordinary differential equation : $$x'(t)=f(t,x(t),x'(t),x'(t)),t{\in}(0,1)$$ subject to the boundary value conditions: $$x'(0)=x'(\xi),x'(1)=^{m-3}{\Sigma}_{i=1}{{\beta}x'({\eta}i),x'(1)=0}$$. Here ${\beta}_{i}{\in}R,\;^{m-3}{\Sigma}_{i=1}\;{\beta}_{i}\;=\;1,\;0<{\eta}_1<{\eta}_2<{\cdots}<{\eta}_{m-3}<1,\;0<\xi<1$. This is the case dimKer L = 2. When the ${\beta}_i$ have different signs, we prove some existence results for the m-point boundary value problem at resonance by use of the coincidence degree theory of Mawhin [12, 13]. Since all the existence results obtained in previous papers are for the case dimKerL = 1, our work is new.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2570-2575
• /
• 2003

Monitoring a power transmission line is significant for power electric companies. In this paper, we propose a new method for detecting an fault point of power transmission line by use of M-sequence correlation technique. In this method, detecting signal is used as one or plural M-sequences ( same characteristic polynomial, including normal and reverse mark, synchronized ). In receiving point, we make same sequence with the input one and take crosscorrelation function between M-sequence and the received signal. We can see transfer fanctions of plural paths between inputs and a output taps separated from different of delay times on the crosscorrelation function, and from these transfer fanctions, so we compare them when fault occurred with in usual.