• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7934-7940
• /
• 2015

The raise of the acceleration can be one of possible methods to increase the scheduled speed of the metropolitan railway system. It is possible to raise the acceleration to the some point by increasing the traction power of the motor. However, there is a limit of the acceleration because the traction power over some level related to the adhesion causes a slip, which prevents from accomplishing the target acceleration. The running resistance is also an important factor to consider. Both the adhesion and the running resistance as well as the traction power vary according to the velocity. Therefore, the standardization of the acceleration needs the analysis of these factors as a function of velocity. In this study, we focus on the advanced urban transit unit(AUTS) for the standardization. We derive a novel equation of the adhesion suitable for the AUTS by investigation of the traction and adhesion equation as well as the experiment data. And finally we propose the standard of the acceleration based on this analysis.

• The KIPS Transactions:PartD
• /
• v.11D no.6
• /
• pp.1259-1268
• /
• 2004

To organize training in limited training area for an actuai combat, realistic training simulation plugged in by various battle conditions is essential. In this paper, we propose a virtual target overlay technique which does not use a virtual image, but Projects a virtual target on ground-based CCD image by appointed scenario for a realistic training simulation. In the proposed method, we create a realistic 3D model (for an instructor) by using high resolution Geographic Tag Image File Format(GeoTIFF) satellite image and Digital Terrain Elevation Data (DTED), and extract the road area from a given CCD image (for both an instructor and a trainee). Satellite images and ground-based sensor images have many differences in observation position, resolution, and scale, thus yielding many difficulties in feature-based matching. Hence, we propose a moving synchronization technique that projects the target on the sensor image according to the marked moving path on 3D satellite image by applying Thin-Plate Spline(TPS) interpolation function, which is an image warping function, on the two given sets of corresponding control point pair. To show the experimental result of the proposed method, we employed two Pentium4 1.8MHz personal computer systems equipped with 512MBs of RAM, and the satellite and sensor images of Daejoen area are also been utilized. The experimental result revealed the effective-ness of proposed algorithm.

• Journal of the Korean association of regional geographers
• /
• v.18 no.3
• /
• pp.336-350
• /
• 2012

Cette $\acute{e}$tude a pour objectif d'analyser et d'expliquer le g$\acute{e}$osite de l'$\hat{I}$le de Geum-o pour connaitre les caract$\acute{e}$ristiques de cette r$\acute{e}$gion du point de vue $\acute{e}$cologique, historique et culturel $\grave{a}$ partir de ses ressources g$\acute{e}$omorphiques et g$\acute{e}$ologiques. Il y a plusieurs ressources g$\acute{e}$otouristiques sur $\hat{I}$le de Geum - o: la falaise de 'Miyeokneolbang' et 'Shinseondae'; la plage de Gigpo; la falaise et la caverne marine de 'Gualbaramtong'; le tombolo et l'$\hat{I}$le reli$\acute{e}$e $\grave{a}$ la terre de Choungsan; la coul$\acute{e}$e de roches de Jangji; la plage de cailloux de Jangji; le lieu des tuf et des andesite de la c$\hat{o}$te orientale. On a g$\acute{e}$n$\acute{e}$ralement d$\acute{e}$velopp$\acute{e}$ la couche s$\acute{e}$dimentaire et les roches volcaniques li$\acute{e}$es $\grave{a}$ la derni$\grave{e}$re p$\acute{e}$riode du m$\acute{e}$sozo$\ddot{i}$que. Une route g$\acute{e}$otouristique part de l'embarcad$\grave{e}$re de Hamgoumi sur l'$\hat{I}$le de Geum-o et continue du Nord-Ouest jusqu'au Sud-Est l'autre route part de la c$\hat{o}$te Est et continue en suivant la c$\hat{o}$te orientale. Nous proposons des panneaux d'explication g$\acute{e}$otouristique de Janji centr$\acute{e}$s sur la coul$\acute{e}$e de roches.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.186-186
• /
• 2000

After LeComber et al. reported the first amorphous hydrogenated silicon (a-Si: H) TFT, many laboratories started the development of an active matrix LCDs using a-Si:H TFTs formed on glass substrate. With increasing the display area and pixel density of TFT-LCD, however, high mobility TFTs are required for pixel driver of TF-LCD in order to shorten the charging time of the pixel electrodes. The most important of these drawbacks is a-Si's electron mobiliy, which is the speed at which electrons can move through each transistor. The problem of low carier mobility for the a-Si:H TFTs can be overcome by introducing polycrystalline silicon (poly-Si) thin film instead of a-Si:H as a semiconductor layer of TFTs. Therefore, poly-Si has gained increasing interest and has been investigated by many researchers. Recnetly, fabrication of such poly-Si TFT-LCD panels with VGA pixel size and monolithic drivers has been reported, . Especially, fabricating poly-Si TFTs at a temperature mach lower than the strain point of glass is needed in order to have high mobility TFTs on large-size glass substrate, and the monolithic drivers will reduce the cost of TFT-LCDs. The conventional methods to fabricate poly-Si films are low pressure chemical vapor deposition (LPCVD0 as well as solid phase crystallization (SPC), pulsed rapid thermal annealing(PRTA), and eximer laser annealing (ELA). However, these methods have some disadvantages such as high deposition temperature over $600^{\circ}C$, small grain size (<50nm), poor crystallinity, and high grain boundary states. Therefore the low temperature and large area processes using a cheap glass substrate are impossible because of high temperature process. In this study, therefore, we have deposited poly-Si thin films on si(100) and glass substrates at growth temperature of below 40$0^{\circ}C$ using newly developed high rate magnetron sputtering method. To improve the sputtering yield and the growth rate, a high power (10~30 W/cm2) sputtering source with unbalanced magnetron and Si ion extraction grid was designed and constructed based on the results of computer simulation. The maximum deposition rate could be reached to be 0.35$\mu$m/min due to a high ion bombardment. This is 5 times higher than that of conventional sputtering method, and the sputtering yield was also increased up to 80%. The best film was obtained on Si(100) using Si ion extraction grid under 9.0$\times$10-3Torr of working pressure and 11 W/cm2 of the target power density. The electron mobility of the poly-si film grown on Si(100) at 40$0^{\circ}C$ with ion extraction grid shows 96 cm2/V sec. During sputtering, moreover, the characteristics of si source were also analyzed with in situ Langmuir probe method and optical emission spectroscopy.

• Korean Journal of Acupuncture
• /
• v.29 no.1
• /
• pp.83-92
• /
• 2012

Objectives : The purpose of this research was to develop the magnetic acupuncture system which used solenoid coil for magnetizing acupuncture needle. The system could generate the meridian electric potential (MEP) similar to the potential by manual acupuncture. Thus, we tried to confirm the therapeutic effect that is caused by the MEP generation. Methods : To confirm the MEP, we stimulated the magnetic acupuncture with at 2Hz, $92.7{\pm}2mT$, PEMFs (Pulsed Electro-Magnetic Fields) at ST37 and measured the evoked potential between ST36 and ST41. Also, we conducted a fatigue recovery test using isokinetic exercise in order to identify the therapeutic effect on musculoskeletal disorders. We chose LR9 as a stimulation point. To observe the state of fatigue, we measured the EMG and analyzed median frequency and peak torque for 20minutes. Results : We observed that MEP which incurred from magnetic acupuncture was higher than he reported MEP induced by manual acupuncture. Moreover, its modes were divided into two types by the direction of magnetic flux. When generating magnetic flux in the direction of acupoint, the positive peak voltage of the MEP was generated. In contrast, negative peak voltage of the MEP was generated whenever meganetic flux generated in the outward direction. As a result of fatigue recovery, the median frequency (MF) of the magnetic acupuncture group were recovered faster than that of the non-stimulation group. However, the peak torques of both groups were not restored until after 20 minutes. Conclusions : We confirmed that the magnetic acupuncture system can lead to the MEP similar to manual acupuncture. Moreover, the MEP had a therapeutic effect on the musculoskeletal disorders.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.366-378
• /
• 1998

Thermocondensation root canal filling technique have been used to fill accessary canals or to obtain homogeneous root caral fillings. But these thermocondensation technique inevitably produce heat in the canal which can be transmitted through the dentin and cementum and consequently damage periodontal ligamental cells and osteoblasts. In this study, System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$(Analytic technology, WA.D.S.A.) was used to evaluate the reaction of periodontal ligament tissue to "Continous Wave condensation technique" introduced by Buchanan, and the transmitted root surface temperature was measured according to measured root thicknesses. 12 Mandibular incisors of two adult dogs were used for the experiment. 6 controls were filled by lateral condensation technique with sealer.3 specimens were apically filled by Continuous Wave technique at $200^{\circ}C$ for 5 seconds and remaining 3 specimens were additionally backfilled using System $B^{TM}$ at $100^{\circ}C$ for 20 seconds. Six weeks later, the dogs were sacrificed and the teeth stained with Hematoxylin and Eosin for histologic examination. 6 extracted human teeth were used to measure the transmitted temperature. After cutting off the crown, the canals were prepared and divided into 3 groups with root thickness of 1.5mm, 1.0mm, 0.5mm, 2 teeth in each group. Inside each root canal, System $B^{TM}$ was heated as with the temperature for the apically condensed and the back filled group, and the transmitted heat was measured on the external surface of the root. The temperature of System $B^{TM}$ heat spreader at $200^{\circ}C$ and $100^{\circ}C$ was also measured at root temperature. It can be concluded as follows: 1. In the thin area (200-$250{\mu}m$) of the root, root resorption could be seen even with heating at $200^{\circ}C$ for 5 seconds. 2. When the spreader was heated at $200^{\circ}C$ for 5 seconds and additionally at $100^{\circ}C$ for 20 seconds for backfill, all teeth showed root resorption regardless of their root thickness. 3. The transmitted external root surface temperature was higher as the root thickness decreased and as the heating time increased. In the thermocompaction technique using System $B^{TM}$, the spreader should be heated for the minimal time and used only in the apical area. The heated spreader shouldn't inserted to the binding point of the canal and backfilling should be done with other means of minimally heated gutta percha technique.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.35-46
• /
• 2015

Purpose - This paper attempted to investigate the relationships among the perception of job insecurity and organizational effectiveness, and it examines these relationships while considering the moderating effect of trust in the manager and self-efficacy. Job insecurity is an independent variable, organizational effectiveness aspects (job satisfaction, organizational commitment, and turnover intention) are dependent variables, and trust and self-efficacy are moderators. Research design, data, and methodology - Regression analysis was used to verify the effects. The measurement items were already deemed as reliable and valid in the previous study, but for this purpose, some modifications were made. To examine the model, this study relied on the samples chosen from Korean employees in the six franchise business firms. The survey was conducted on 288 workers. Each question is based on a 5-point Likert type scale. The data were analyzed using SPSS 18.0. Results - The results of the study are summarized as follows. First, job insecurity has an influence on organizational effectiveness aspects (negatively on job satisfaction, negatively on organizational commitment, and positively on turnover intention). Second, analyzing the moderating effect of trust, trust in manager is mediated between job insecurity and organizational effectiveness aspects (on organizational commitment and on turnover intention). However, employees' trust in manager had no significant moderating effect on the job insecurity-job satisfaction relationship. Third, self-efficacy is mediated between job insecurity and organizational effectiveness aspects (on job satisfaction, on organizational commitment, and on turnover intention). Conclusions - First, it is necessary to be aware of the seriousness of employees' job insecurity in franchise firms, which have played a pivotal role in national economic growth, and to create a detailed plan for reducing insecurity and actively implementing it. To this end, the franchise companies should implement efficiency efforts such as obtaining an appropriate capacity of equipped personnel and a training program. Second, there are moderating effects of self-efficacy and trust in the relationship between job insecurity and organizational effectiveness. Depending on business conditions, stability and instability can only be experienced in the organizations of franchise companies. This can give rise to instability in employment. Therefore, it is necessary to develop and utilize a system that can be minimized with a change in the new awareness of employment instability. After all, a good leader (manager) must accumulate personal trust and build up a core competence that is necessary to become competent in the field himself. Even if you lack the material resources to improve performance, if the leader with the core competencies (e.g., technical/management /organization/marketing/design) can gain the trust of the supervisor, you can get a good organizational performance. Therefore, you should foster a healthy organizational culture through education such as leadership training and employee training to be built on trust between the leaders and the employees. In addition, you need to focus on HRD&M training in order to increase the self-efficacy of the supervisor.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.3
• /
• pp.342-351
• /
• 2016

This study was carried out to develop an optimized analytical method using high-performance liquid chromatography (HPLC) applied to canthaxanthin, which is not yet designated as a food colorant in Korea, as well as to perform validation and uncertainty evaluation of this method. Official methods of AOAC, UK, and Japan with HPLC-UV detection were evaluated for the analysis of canthaxanthin by comparison of linearity, resolution, selectivity, limit of detection (LOD), limit of quantitation (LOQ), accuracy, precision, recovery, inter-laboratory tests, and uncertainty measurement. The calibration curves showed high linearity with an $R_2$ value of over 0.999 for canthaxanthin standard solutions in all three official methods. The official method of Japan exhibited the best results in terms of resolution and selectivity, including the lowest LOD and LOQ. The average coefficients of variation were calculated as less than five of three institutes with a precision value less than 1, accuracy near 100%, and recovery ratio between $100{\pm}10%$. The expanded uncertainty for canthaxanthin was estimated to be $39.5{\pm}5.29mg/kg$ (95% confidence level, k=2), and the uncertainty of measurement was 13.4%. In this study, official methods of canthaxanthin were compared and the validities verified. The results will be further applied to establish an authorized analytical method for canthaxanthin in Korea.

• Gut and Liver
• /
• v.12 no.6
• /
• pp.728-735
• /
• 2018

Background/Aims: The combination of nab-paclitaxel and gemcitabine (nab-P/Gem) is widely used for treating metastatic pancreatic cancer (MPC). We aimed to evaluate the therapeutic outcomes and prognostic role of treatment-related peripheral neuropathy in patients with MPC treated with nab-P/Gem in clinical practice. Methods: MPC patients treated with nab-P/Gem as the first-line chemotherapy were included. All 88 Korean patients underwent at least two cycles of nab-P/Gem combination chemotherapy (125 and $1,000mg/m^2$, respectively). Treatment-related adverse events were monitored through periodic follow-ups. Overall survival and progression-free survival were estimated by the Kaplan-Meier method, and the Cox proportional hazards regression linear model was applied to assess prognostic factors. To evaluate the prognostic value of treatment-related peripheral neuropathy, the landmark point analysis was used. Results: Patients underwent a mean of $6.7{\pm}4.2$ cycles during $6.3{\pm}4.4$ months. The median overall survival and progression-free survival rates were 14.2 months (95% confidence interval [CI], 11.8 to 20.3 months) and 8.4 months (95% CI, 7.1 to 13.2 months), respectively. The disease control rate was 84.1%; a partial response and stable disease were achieved in 30 (34.1%) and 44 (50.0%) patients, respectively. Treatment-related peripheral neuropathy developed in 52 patients (59.1%), and 13 (14.8%) and 16 (18.2%) patients experienced grades 2 and 3 neuropathy, respectively. In the landmark model, at 6 months, treatment-related peripheral neuropathy did not have a significant correlation with survival (p=0.089). Conclusions: Nab-P/Gem is a reasonable choice for treating MPC, as it shows a considerable disease control rate while the treatment-related peripheral neuropathy was tolerable. The prognostic role of treatment-related neuropathy was limited.

• Korea Real Estate Review
• /
• v.24 no.1
• /
• pp.27-37
• /
• 2014

Recently increasing the supply of housing policy has not been able to reflect social phenomena as like decreasing birth rate, aging of the population and increasing 1 or 2 person households. This study analyze the housing demand in the city with the point of population growth rate and economic character changes. Growing cities have positive population growth rate and economic character, but shrinking cities have the opposite. By comparing housing demand of growing cities and shrinking cities, we want to find out housing policy implications. In this study, results suggest that the peak age of housing demand of shrinking cities is the late 60's. But the growing cities's age peak is the mid-80's. But further analysis of the economic variables and 1 or 2 person old and young household dummies, the result is that the peak age of housing demand is reduced. These results suggest that housing demand should be differentiated the cities's population structure and economic characteristics of the household. In short, housing demand will vary depending on the condition of individual cities.