• Title/Summary/Keyword: m-Services

Search Result 1,875, Processing Time 0.035 seconds

Patterns in User Requests for Facility Management Services in Higher Education Facilities (대학 시설물 유지관리 서비스 사용자 요청 패턴 분석)

  • Uhm, Miyoung;Lee, Ghang
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2015.11a
    • /
    • pp.95-96
    • /
    • 2015
  • This paper aims to identify patterns in users' requests for facility management (FM) services in higher education facilities. We analyzed data collected from 309 service request forms, made available via a department office and an enterprise resource planning system, at a private university in Seoul between May 2009 and February 2015. We found that the number of user requests were the highest in September and October. Requests for electronic and communication (E/C) services outnumbered those for architectural services and mechanical and plumbing (M/P) services. Repair requests for doors and windows were the most common under architectural services; repairs for air-conditioners and radiators were the most commonly under M/P services; and installation of electrical outlets, telephone wires, and internet services were the most sought-after E/C services. Maintenance requests were received every three months, while repair requests were received every six or seven months.

  • PDF

A Study about effective handling method of service in M2M Communications (M2M 통신에서 서비스의 효과적인 처리 방안에 대한 연구)

  • Lee, Sun-Sic;Song, Min-Seop;Nam, Jae-Hyun;Jang, Jong-Wook
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2013.05a
    • /
    • pp.325-328
    • /
    • 2013
  • Recently, the national carrier of the next-generation growth engine of M2M (machine to Machine) is attracting attention. Therefore, its uses and utilization of the various disciplines is getting wider, and the increasing number of terminals to be used compared to the existing communication of the information that is sent in every object may have increased. Each data transfer from the bulk terminal to a mobile network, if the traffic situation reaches this limit does not facilitate the processing of M2M communication services, this situation can occur. This study measures the mobile networks will be used in M2M communications when it reaches the breaking point for the smooth processing of M2M services are presented. Things grows increasingly smaller the further development of M2M technology, the explosion in mobile communication network, the data traffic will reach the limitations of these methods will be used in determining the ranking of the M2M communication services should be treated as a priority, to beM2M services to mobile networks will help to facilitate.

  • PDF

Analysis of Keyword Trend for ICT Convergence Services (ICT 융합 서비스의 키워드 트렌드 분석)

  • Jang, HeeSeon
    • Convergence Security Journal
    • /
    • v.14 no.2
    • /
    • pp.35-41
    • /
    • 2014
  • With ubiquitous computing and network, the concern of government, business and academy for IT or ICT convergence has been increased. In this paper, through the analysis of keyword trend for ICT convergence services from 2000's mid, the efficient policy is proposed by estimating the understanding and concern of common people. In addition to, the concept and development step of convergence are analyzed, and the keyword analysis for the ICT convergence services defined in TTA is performed. The services are classified into smart home work transportation, Health ICT, RFID USN, M2M IoT, e-Navigation, intelligent robot, and the keywords for each service are analyzed. The analytic results indicate that the keyword trend varies in the time, and highly indexing keywords and new trend are defined. To provide the efficient ICT services, the new ICT convergence services needed for customer will be proposed with new IT technology development, IT standard, law management, and policy provisioining.

Occurrence of Powdery Mildew on Safflower Caused by Sphaerotheca fuliginea in Korea

  • Kwon, Jin-Hyeuk;Kang, Soo-Woong;Lee, Heung-Su;Park, Chang-Seuk
    • Mycobiology
    • /
    • v.28 no.1
    • /
    • pp.51-53
    • /
    • 2000
  • The powdery mildew of safflower (Carthamus tinctorius L.) extensively occurred at 1999 at the experimental farm of Kyongsangnam-do Agricultural Research and Extension Services. Both sides of the leaves and the older stems were covered with the fungus, and then the leaves and stems turned yellow. The conidia, conidiophores and perithecia were observed on the leaf lesion. Perithecia were ellipsoidal, $80-117\;{\mu}m$ in diameter. Asci were subglobose and $84{\sim}99{\times}59{\sim}73\;{\mu}m$ in size. Ascospore were ellipsoidal to ovoid, and $15{\sim}34{\times}11{\sim}23\;{\mu}m$ in size. Conidia were ellipsoid to barrel-shaped, $25{\sim}37{\times}11{\sim}22\;{\mu}m$ in size and formed in long chains. The causal organism was identified as Sphaerotheca fuliginea. This is the first report on powdery mildew of safflower caused by Sphaerotheca fuliginea in Korea.

  • PDF

An Empirical Study on the Factors Affecting the Intention to Use M2E Services

  • Sang Hoon Lee;Min-Ju Kim;Su-Yeon Kim
    • Asia pacific journal of information systems
    • /
    • v.33 no.3
    • /
    • pp.792-811
    • /
    • 2023
  • Recently, Web 3.0 services such as virtual currency, block chain, and NFT are attracting public attention. Users who depended on platforms are moving away from being dependent on service providers and moving to Web 3.0 services. Representative services of Web 3.0 include P2E (Play to Earn) and M2E (Move to Earn). In the case of P2E, various studies have been conducted as it is widely covered in the press and media, but research on M2E is relatively lacking. This study attempts to identify the intention to use M2E by using the expanded technology acceptance model. External factors were selected based on M2E's own characteristics and personal characteristics, a research model was designed, and the proposed hypotheses were verified through factor analysis and goodness of model fit. As a result of the study, it was confirmed that profitability, innovativeness, and self-expression had a positive effect on perceived characteristics, and that perceived usefulness, perceived enjoyment, and social influence had a positive effect on intention to use. Through the research results, practical implications for efficient service operation that meets the needs of users are presented to M2E platform providers.

Effects of Non-drainage Hydroponic Culture on Growth, Yield, Quality and Root Environments of Muskmelon (Cucumis melo L.) (멜론 수경재배 시 배액제로화가 근권환경 및 수량에 미치는 영향)

  • Chang, Young Ho;Hwang, Yeon Hyeon;An, Chul Geon;Yoon, Hae Suk;An, Jae Uk;Lim, Chae Shin;Shon, Gil Man
    • Journal of Bio-Environment Control
    • /
    • v.21 no.4
    • /
    • pp.348-353
    • /
    • 2012
  • This study was conducted to figure out the possibility of non-drainage in muskmelon (Cucumis melo L.) hydroponics culture. Plants were grown under 3 different levels of drainage, standard (20~40%, SD), minimum (5~10%, MD), and non-drainage (ND). Throughout cultivation periods, constant water content and electrolyte conductivity changes in root zone were observed in SD in the range of 60~70% and $1.5{\sim}2.5dS{\cdot}m^{-1}$, respectively. ND treatment caused the fluctuation in water content and electrolyte conductivity of root zone and its change ranges were 30~50% in water content and $2{\sim}6dS{\cdot}m^{-1}$ in electrolyte conductivity, but ND treatment did not decrease fruit quality. Even if fruit fresh weight was slightly lower in ND with 1,863 g, than in SD with 1,990 g, the fruit weight in ND meets standard market size, 1,800~2,000 g. Higher soluble solids content was observed in fruit in ND than in SD and MD. Total amount of drainage per plant was 27,718, 15,769 and 2,346 mL in SD, MD and ND, respectively. SD showed $83.2m^3$ drainage, 34.5% drainage of irrigation amount whereas required total irrigation amount in ND was very low with $7m^3$.

Services of an Integrated Simulation Engine for Weapons Analysis (무기체계 효과도 분석을 위한 통합 모의 엔진의 서비스 구성 방안 연구)

  • Kim, Tae-Sup;Park, Joon-Ho;Kim, Hyun-Hwi;Park, Chan-Jong;Lee, Kang-Sun
    • Journal of the Korea Society for Simulation
    • /
    • v.19 no.4
    • /
    • pp.261-270
    • /
    • 2010
  • An integrated simulation engine provides tools, services, and standards to support various activities in the entire M&S from modeling and simulation to analysis of the simulation results. Many countries have developed integrated simulation engines to efficiently assist complex M&S activities. However, we do not have domestic simulation engines especially designed for defense M&S, therefore, developing M&S softwares still remains as a hard task with high cost and tine. OpenSIM(Open Simulation engine for Interoperable Models) is an integrated simulation engine and provides tools, services and standard interfaces for weapons analysis. OpenSIM's services are comprised of classes, member functions and data attributes which are commonly used in modeling, simulating and analyzing weapons systems. In this paper, we introduce OpenSIM's services in C++ APIs and illustrate them through an ASM example(Air to Surface Missile).

Modeling Service based on XML Schema for MPEG Multimedia Middleware

  • Hendry Hendry;Kim Mun-Churl
    • Korea Multimedia Society
    • /
    • v.10 no.1
    • /
    • pp.114-128
    • /
    • 2006
  • Recently MPEG (Moving Picture Experts Group) has started a new standardization activity called MPEG Multimedia Middleware (M3W). The M3W supports multimedia applications Independent of hardware and software such as operating systems so that the portability and interoperability of multimedia applications are greatly improved. In doing so, the M3W adopts the concept of a service-based middleware. The M3W standardizes a set of multimedia Application Programming Interfaces (APIs) and their implementations can be pro vided by third parties In the form of services. In this paper, we introduce the usage of XML metadata in describing the standard multimedia APIs and third party's services and also we explain the role of the XML Schema within the M3W in providing transparent access from application to the M3W services.

  • PDF

Smart Grid Use Case and Service Requirement Based on M2M: Energy Management System for Public Buildings (M2M 기반 스마트 그리드 적용 사례 및 서비스 요구사항에 관한 연구: 공공빌딩 에너지 관리)

  • Hwang, Sung-Il;Park, Tae-Jun;Sohn, Young-Keun;Jeon, Gun-Pyo
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.38C no.7
    • /
    • pp.612-620
    • /
    • 2013
  • Problem of energy worldwide reduction had to research on the requirements of services and an important element for the energy management of public buildings and facilities. In this paper, we research the SmartGrid case studies and services requirements based on M2M service. As a result, operation of devices for energy management, network, and application services for a variety of energy-efficiency requirements for the profile was defined. In this study is possible to provide in survey of the smart grid system of M2M-based in public institutions, schools and universities, and large buildings.

A Case Study on BIM Operating and Performance Measurement in Construction Phase (시공현장 BIM 운영 및 성과측정을 위한 사례분석)

  • Ham, Nam-Hyuk;Kim, Jae-Jun
    • Journal of KIBIM
    • /
    • v.5 no.2
    • /
    • pp.1-11
    • /
    • 2015
  • Despite a lot of research on BIM, there is no quantitative study to measure accurately the performance of BIM coordination service. Thus, this study suggested method to measure the performace of BIM coordination services, applying queueing models in the field of management science. To analyze queuing system of BIM coordination services, a group of BIM coordinator were selected. Through focus group interviews with experts were used in the analysis to derive mean arrival rate(${\lambda}$), mean service rate(${\mu}$) of BIM coordination services. Single-server queuing model(M/M/1), multiple server queuing model(M/M/s) is utilized for the BIM coordination services performance measurement in construction phase. This study has significant quantitative performance measurement approaches that can be utilized in the decision-making for the improvement of the BIM coordination services and to support the review of the alternatives accordingly. But There is a limit but it is difficult to take into account the increase or decrease of the cost of alternatives according to the review.