• 제목/요약/키워드: luminous efficiency

검색결과 385건 처리시간 0.033초

AC Plasma Display Panel에서의 Sustain Pulse 변화에 따른 발광효율 특성 (Characteristics of Luminance Efficiency with Sustain Pulse Variation in AC PDP)

  • 조기덕;장상훈;태흥식
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
    • /
    • pp.48-51
    • /
    • 2000
  • 플라즈마 디스플레이 패널의 발광효율을 개선하기 위하여 sustain 구간의 파형을 변화시킨 새로운 구동파 형을 제안하였다. 제안된 sustain 파형은 기존의 구형파에 기울기를 가진 ramp 형태의 파형을 덧붙여 줌으로써 Self-Erasing을 유도하는 파형이다. 기존에 제안된 Self-Erasing을 이용한 구동방식은 높은 구동주파수(>150kHz)에서만 발광효율이 개선되는 반면, 본 논문에서 제안하는 파형은 낮은 구동주파수(25kHz)에서도 30%정도의 발광효율이 개선되었다. 본 논문의 결과로부터 주파수, 듀티, 기울기 등의 다양한 구동조건에서의 연구가 진행된다면 더 큰 발광효율개선이 기대된다.

  • PDF

Binary and ternary gas mixtures of He-Ne-Xe for improvement of vacuum ultraviolet luminous efficiency in ac-PDPs.

  • Jung, Kyu-Bong;Lee, Jun-Ho;Park, Won-Bae;Jeon, Wook;Oh, Phil-Young;Cho, Guang-Sup;Uhm, Han-Sup;Choi, Eun-Ha
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.522-524
    • /
    • 2004
  • The improvement of luminance and luminous efficiency is the one of the most important part in AC-PDPs. To achieve high luminance and luminous efficiency, high VUV emission efficiency is needed. We measured the emission spectra of vacuum ultraviolet(VUV) rays in surface discharge AC-PDP with binary and ternary gas mixtures of Ne-Xe and He-Ne-Xe. The influence of He-Ne-Xe gas-mixture ratio on excited $Xe^{\ast}$ resonant atoms and $Xe_2$$^{\ast}$ dimers has been investigated. It is found that luminous efficiency of ternary gas mixture, He-Ne-Xe, is shown to be much higher than that of binary gas mixture of Ne-Xe.

  • PDF

AC PDP에서 CLHS 구동 방법에 의한 ITO Gap에 따른 방전 특성 (The Characteristics of the Discharge According to ITO Gap by the CLHS Driving Method in AC PDP)

  • 신재화;최명규;김근수
    • 전기학회논문지
    • /
    • 제62권1호
    • /
    • pp.83-89
    • /
    • 2013
  • In order to reduce the power consumption in international standard IEC62087, the luminance efficiency should be improved at the low discharge load rather than at the high discharge load. Thus, this paper analysed the characteristics of the discharge at the panels with ITO Gap of $65{\mu}m$, $80{\mu}m$, and $100{\mu}m$ in 50-inch PDP with FHD resolution. It was well known that the long gap panel improves the luminance and the luminous efficiency. However, it is very difficult to drive the panel due to high driving voltage. When the normal driving method was applied at the panel with ITO gap of $100{\mu}m$, the phenomenon of the double peak was generated in the sustain period. We confirmed that main factor of the double peak is the self-erasing discharge. When the CLHS driving method was applied at the panel with ITO gap of $100{\mu}m$, the self-erasing discharge was improved in the sustain period. Also, the $V_S$ and $V_A$ minimum voltage of the CLHS driving method decreased about 9V and 12V compared with those of the normal driving method. Moreover, when the CLHS driving method was applied to the panel with ITO gap of $100{\mu}m$, the luminance and the luminous efficiency increased compared with those of the normal driving method. The luminance and the luminous efficiency greatly increased at the low discharge load. The less discharge load, the higher increase rate of the luminance and the luminous efficiency. Especially, the luminous efficiency at ITO gap of $100{\mu}m$ increased about 26.3% at the discharge load of 4% compared with that at ITO gap of $65{\mu}m$.

조명용 백색 LED광원의 등기구 형태에 따른 광도 및 기구효율 분석 (The Luminous Intensity and Luminaire Efficiency Analysis of White LED as Luminaire types for General Lighting)

  • 황명근;허창수;서유진
    • 조명전기설비학회논문지
    • /
    • 제18권3호
    • /
    • pp.20-26
    • /
    • 2004
  • 본 논문에서는 조명용 고휘도(HB, high brightness) 백색 LED(light emitting diode)램프의 배열 및 여러 가지 등기구 글로브(globe)의 형태에 따른 광도(luminous intensity)값과 기구효율(luminaire efficiency)을 컴퓨터 시뮬레이션으로 수행하여 비교분석 하였다. 즉, LED의 배열은 가로${\times}$세로(7개${\times}$7개)가 정사각형 형태로 49개를 배열하고, LED 간격은 LED의 발광면 중심부로부터 8.2[mm], 10.0[mm], 15.0[mm]로 각각 3가지로 하였으며, 등기구의 글로브는 LED발광면 중심부에서 30[mm], 50[mm] 떨어진 거리로 구분하였다. 또한 등기구 글로브가 없을 때와 있을때로 구분하여 있을 때에는 글로브 형태를 볼록 원형과 엠보(embossing)형태로 구분하고 엠보는 8.2[mm], 5.0[mm]의 크기에 따른 선택으로 시뮬레이션 27가지로 수행하여 등기구의 글로브 형태에 따른 광도 및 기구효율을 고찰해 봄으로써 앞으로 21세기 디지털조명이라고 일컫는 LED를 사용한 LED 광원(light source) 및 등기구 개발에 많은 도움이 되고자 하였다.

대향형 Xe 플라즈마 평판 램프의 방전 및 발광 특성에 관한 수치적 연구 (Numerical Analysis of the Discharge and Luminous Characteristics of a Planar Type Xe Plasma Flat Lamp)

  • 김혁환;이원종
    • 한국전기전자재료학회논문지
    • /
    • 제24권10호
    • /
    • pp.822-833
    • /
    • 2011
  • A Xe plasma flat lamp, which has been noticed as a new eco-friendly LCD (liquid crystal display) backlight, requires the improvement of the luminance and the luminous efficiency although it has several advantages. To improve the performance of a lamp, it is necessary to understand the effects of discharge variables on the luminous characteristics of the lamp. Since it is difficult to diagnose a lamp discharge experimentally, the numerical analysis can be used instead. In this study, the luminous characteristics of a planar type Xe plasma flat lamp were analyzed with the variation of an input voltage and a pulse frequency. The numerical analysis of a lamp discharge was then performed using a RCT (relaxation continuum) model and a LFA (local field approximation) model. The comparison with the experimental results showed that the RCT model is valid for the numerical analysis of the flat lamp. The numerical analysis also showed that the modifications of a high frequency component and a voltage falling rate in the input voltage waveform could improve the luminous characteristics of the lamp.

교류형 플라즈마 디스플레이에 있어서 유지방전 주파수에 따른 발광 효율에 미치는 영향 (Influence of Sustaining Frequency on the luminous Efficiency in AC-PDP)

  • 정의선;김대일
    • 조명전기설비학회논문지
    • /
    • 제14권6호
    • /
    • pp.1-5
    • /
    • 2000
  • 최근 디지털 텔레비젼전 및 고해상도(High Definition) 텔레비전용 표시장치로 교류형 풀랴즈마 디스플레이가 각광 받고 있다. 상용화되고 있는 교류형 플라즈마 디스플레이의 구조를 보면 3전극행 면방전형(three electrodes surface discharge type)이 주류이다. 재의 효율은 11m/W의 수준으로 본격적인 상용화를 위해서는 효율의 향상이 관건이다. 효율 향상올 위해서는 패널 구조(Panel structure)의 개선도 필요하지만 주어진 구조에서 최대한의 효율을 갖도록하는 구동방법의 최적화가 선결 과제이다. 교류형 플라즈마 디스플레이의 방전 이미지는 연속되는 방전 발광에 의해 이루어 진다. 대부분의 전략 소모는 연속되논 발광을 위한 유지 방전에서 소모되기 때운에 유지방전의 파형의 최적화는 고 방전 효율을 위한 중요한 과제이다. 구동 방식으로서는 ADS(Address and Display period Separated) 구동이라는 방식이 일반적으로 널리 쓰이고 있다. 이 구동법의 평균 유지방전 주파수는 수십 [kHz]이지만 실제 주파수는 100[kHz]에서 200[kHz] 사이의 상당히 높은 값이다. 본 연구 결과에 따르면 형광체가 가시광을 방출시킬 때 형광체 재료의 특성상 감쇄시간(Decay Time)이 수 ms에 이른다. 만약 감쇄 시간이 유지방전 펄스으 주기보다 길다면 방전에서 만들어진 진공자외선(Vacuum Ultra Violet Rav)이 가시광으로 변환애 효과적으로 이용되지 못한다. 결국 발광 효율은 유지방전 주파수에 비례하여 감소한다. 결론적으로 말해 저 주파수 유지 방전으로 발광효율을 크게 개선할 수 있다.

  • PDF

렌즈에서 투과된 광의 시감도 추정 방법 (Luminous efficiency's estimation method of transmitted light in lenses)

  • 김용근
    • 한국안광학회지
    • /
    • 제8권2호
    • /
    • pp.163-168
    • /
    • 2003
  • 광의 세기에 따라 눈의 시감효율은 추상체와 간상체에 의해 파장에 따라 2개의 함수로 이루어진다. 광자에 대한 추상체-간상체의 반응확률을 이용하여 $P{\lambda}=A{\cdot}e^{-({\lambda}-{\lambda}_u)^2/2W^2}$의 분포함수 수식을 유도하였다. 이 식은 파장에 따른 CIE의 눈의 시감효율 곡선에 잘 적용되었다. 눈앞에 렌즈가 있는 경우 시감도는 보정 되어야 한다. 렌즈를 투과할 광은 흡수 파장에 의존하고, 최종 시감도는 추정방법은 시감도와 렌즈의 투과율 세기의 곱으로 표현된다. $$Pf({\lambda})=T({\lambda}){\cdot}P({\lambda})$$. 브라운 칼라 렌즈에 대해 시감도인 photopic과 scotopic 적용하였다.

  • PDF

LCD Backlight용 외부전극 형광램프의 발광특성 (Luminescent Characteristics of External Electrode Fluorescent Lamp(EEFL) for LCD Backlight Applications)

  • 이순석;임성규
    • 대한전자공학회논문지SD
    • /
    • 제39권12호
    • /
    • pp.1016-1021
    • /
    • 2002
  • LCD backlight용 형광램프(fluorescent lamp, FL)의 전극구조에 따른 발광특성을 평가하였다. 동일한 조건에서 제작된 cold cathode fluorescent lamp(CCFL) 및 EEFL에 대하여 인가전압과 EEFL의 전극 폭에 따른 휘도와 발광효율을 측정, 평가하였다. 12 V에서 측정된 CCFL의 휘도와 발광효율은 각각 27600 cd/㎡ 및 35.3 lm/w를 나타내었다 EEFL의 휘도는 전극면적을 증가시킬수록 증가되었고, 발광효율은 전극 면적이 증가되면서 증가되었다가 전극 폭 20 mm에서 최대값을 나타낸 다음 다시 감소하였다. 20 mm의 전극 폭을 갖는 EEFL에 대하여 12 V와 14 V에서 측정된 휘도와 발광효율은 각각 21600 cd/㎡, 26500 cd/㎡ 및 35.6 lm/w, 34.8 lm/w였다.

버퍼층과 음전극에 따른 유기 발광 소자의 전기적 특성과 발광 효율 (Electrical Properties and Luminous Efficiency in Organic Light-Emitting Diodes Depending on Buffer Layer and Cathodes)

  • 정동회;김상걸;홍진웅;이준웅;김태완
    • 한국전기전자재료학회논문지
    • /
    • 제16권5호
    • /
    • pp.409-417
    • /
    • 2003
  • We have studied electrical properties and luminous efficiency of organic light-emitting diodes(OLEDs) with different buffer layer and cathodes in a temperature range of 10 K and 300 K. Four different device structures were made. The OLEDs are based on the molecular compounds, N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine (TPD) as a hole transport, tris(8-hydroxyquinolinato) aluminum(III) (Alq$_3$) as an electron transport and omissive layer, and poly(3,4-ethylenedioxythiophene) :poly (styrenesulfonate) (PEDOT:PSS ) as a buffer layer. And LiAl was used as a cathode. Among the devices, the ITO/PEDOT:PSS/TPD/Alq$_3$/LiAl structure has a low energy-barrier height for charge injection and show a good luminous efficiency. We have got a highly efficient and low-voltage operating device using the conductive PEDOT:PSS and low work-function LiAl. From current-voltage characteristics with temperature variation, conduction mechanisms are explained SCLC (space charge limited current) and tunneling one. We have also studied energy barrier height and luminous efficiency at various temperature.

ZnS 완충층을 사용한 SrS : Ce, Cl 박막 EL 소자의 효율 (Luminous Efficiency of SrS:Ce, Cl EL Device with ZnS Buffer Layer)

  • 임영민;최광호;장보현
    • 한국광학회지
    • /
    • 제2권3호
    • /
    • pp.115-120
    • /
    • 1991
  • ZnS 완충층이 SrS : Ce, Cl 박막 EL cell의 발광휘도 및 효율에 미치는 영향을 조사하였다. ZnS 완충층을 사용한 cell과 사용하지 않은 cell의 구동전압은 각각 210V, 220V 이상이고 주파수 범위는 500 Hz-20kHz로 하였다. 측정범위 내에서 휘도는 주파수와 이동전하밀도의 곱에 비례하고, 한편 이동전하밀도는 주파수에 무관하고 구동전압에 비례한다. 결과적으로 발광효율은 주파수와 구동전압에 무관하다. 완충층을 사용하므로 활성층의 발광특성을 향상시킬 수 있으며, 발광효율은 완충층 유무에 따라 각각 0.12 lm/W, 0.06 lm/W 이다.

  • PDF