• Korean Journal of Materials Research
• /
• v.24 no.12
• /
• pp.710-714
• /
• 2014

The effect of titanium dioxide ($TiO_2$) on the properties of color conversion glasses was examined for glasses based on $BaO-ZnO-B_2O_3-SiO_2$. One glass sample, containing 25 mol% of each component, was used as a reference; the other three glass samples contained 1, 3, and 5 mol% $TiO_2$, respectively. The four color conversion glass samples were prepared by sintering a mixture of glass frits and a $YAG:Ce^+$ phosphor. The characteristics of the color conversion glass samples, such as luminous efficacy, luminance, CIE (Commission International de I'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) were analyzed according to the PL spectrum. The refractive index of the glass samples was found to increase with the titanium dioxide content. In conclusion, luminous efficacy of color conversion glasses increased as the content of $TiO_2$ was raised in the glass matrix.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1555-1558
• /
• 2008

Various approaches were undertaken by major PDP makers in order to improve the luminous efficacy of the plasma discharge cells. There have been many reports that state that using a high Xe content PDP is one of the most promising key technologies available to improve the luminous efficacy. In the case of the higher Xe content panel, the higher address and sustain voltage were needed to drive the panel under the same reset condition. In this study, a variety of Xe content panels were investigated in order to examine wall voltage transfer behaviors. The transferred wall voltage status after addressing discharge at the same driving condition was analyzed by comparing Vt close curve of high and low Xe content panels. Through this analysis of Vt close curve difference, the driving waveform of a high Xe panel was quantitatively adjusted Under the same address voltage condition, results showed that the amount of the transferred wall voltage and Vt close curve after addressing discharge was matched for the first sustain discharge. Taking these results into consideration, we conclude that the driving waveform for different Xe content panels could be designed for the desired addressing discharge condition and the wall voltage state of the cell could be quantitatively controlled and measured through these approaches.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.669-674
• /
• 2012

Yellow phosphor dispersed color conversion glasses are promising phosphor materials for white LED applications because of their good thermal durability, chemical stability, and anti-ultraviolet property. Six color conversion glasses were prepared with high Tg and low Tg specimens of glass. Luminous efficacy, luminance, CIE (Commission Internationale de l'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) of the color conversion glasses were analyzed according to the PL spectrum. Color conversion glasses with high Tg glass frit, sintered at higher temperature, showed better luminous properties than did color conversion glasses with low Tg glass frit. The characteristics of the color conversion glass depended on the glass composition rather than on the sintering temperature. The XRD peaks of the YAG phosphor disappeared in the color conversion glass with major components of $B_2O_3$-ZnO-$SiO_2$-CaO and, in the XRD results, new crystalline peaks of $BaSi_2O_5$ appeared in the color conversion glass with major components of $Bi_2O_3$-ZnO-$B_2O_3$-MgO. The characteristics of CIE chromaticity, CCT, and the CRI of low Tg color conversion glasses showed worse color properties than those of high Tg color conversion glasses. However, these color characteristics of low Tg glasses were improved by thickness variation. So color conversion glasses with good characteristics of both luminous and color properties were attained.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.4
• /
• pp.330-334
• /
• 2013

We developed a package of remote phosphor structure having blue LED chips and phosphors physically separated, and the characteristics were evaluated according to different classifications of phosphor coatings. Remote phosphor was produced by screen printing coating on glass substrate with phosphor content rated paste and heat treatment. After mounting Remote phosphor, which has been classified according to number of coatings, on top of blue LED chips, luminous flux, luminous efficacy, CCT and CRI were measured. The measurement results showed the most suitable characteristics of white LED package as a general light source when the content rate of phosphor in Remote phosphor was 80 wt.% with 3 layers of coatings and thickness over $12{\mu}m$.

• Journal of Power Electronics
• /
• v.9 no.2
• /
• pp.164-172
• /
• 2009

Recently, 2-dimensional flat light sources have been attracting much attention for its use in LCD backlight applications because of its high luminous efficiency and uniformity. A long-gap discharge, mercury-tree flat fluorescent lamp has been developed, which shows a high brightness ($>5000\;cd/m^2$) and high luminous efficacy (60 lm/W). Additionally, it has a wide operating margin and stable driving condition with the aid of an auxiliary electrode. For driving the lamp, a narrow pulse power to maintain the glow discharge state is required. Since there has been no research for this kind of lamp driving, this paper proposes a newly developed short-pulse, high-voltage lamp-driving scheme. The proposed lamp system uses a ballast with a coupled-inductor in order to raise the short pulse voltage up to the lamp ignition level and to obtain energy-recovery action during the glow discharge mode. The operation principles are presented and also the system performances such as the lighting efficiency, spatial and angular uniformities are evaluated by hardware experiments. The results show that the proposed lighting system is a good candidate for the next-generation of LCD backlight systems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.25-30
• /
• 2004

In this paper, we suggest a new front panel structure with ridged front panel dielectric layer and hollow gap. The proposed structure can decrease a driving voltage and increase Xe content due to strong electric fields. In the experiment, we have used 6" test panel with 10 %, 15 %, 20 %, 30 % and 50 % Xe contents and 450 torr gas pressure. When comparing with a conventional structure in Xe 10 %, the proposed structure with same Xe content decreased a firing and sustain voltage by about 74 V and 79 V, also the luminance and luminous efficacy of proposed structure with 50 % Xe content were improved by about 33 % and 50.9 %..9 %.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2169-2171
• /
• 2005

A new structure is proposed to achieve a low sustaining voltage and high luminous efficacy. By measuring minimum sustaining voltage(Vs) discharge current(Ion), discharge(Ioff), and brightness of the light from a 4-inch ac-PDP, performances of the conventional structure and proposed structure are compared. When compared with the conventional structure, proposed structure showed 6.5% Vsm improvement, 22% luminance improvement and 20% light dispersion improvement at the Ne-Xe(8%) gas mixture of 400 torr.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.524-528
• /
• 2019

Although different types of discharge cells exist, in common it is the primary goal for all discharge cells to have lower drive voltages and higher efficiency characteristics. To improve these factors, many studies are conducted that prolong the discharge path inside the discharge cell or change the composition of the working gas. In this paper, the two-dimensional fluid simulation was used to calculate the discharge voltage (firing voltage and sustain voltage) and the change in luminance and luminous efficacy according to the change in gap distance between discharge electrodes. In addition, we looked at changes in various charged particles, exciting particles and VUV particles, and studied the causes of the resulting values.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.4
• /
• pp.422-427
• /
• 2014

In this paper, simple LED driver is proposed. The proposed driver has simple construction having series capacitor, bridge rectifier, and adjustable regulator IC. Constant current control is possible with the use of TL431Z. The proposed in this paper, current is greater than the rating of the load, the current controller device measures the increased current in the circuit, and turned-on so that the current will be shared. Thus current control device makes the circuit more reliable, longevity as well as increase the luminous efficacy of the LED light. The simulation and experimental results are presented to show the validity of the proposed circuits.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.7
• /
• pp.980-986
• /
• 2013

In this paper, the discharge characteristics of ac-type cylindrical discharge devices with diameters (D) in the $50{\sim}400{\mu}m$ range have been investigated numerically. The cylindrical devices have much lower breakdown voltages compared to the coplanar electrode structures. The breakdown voltage of the cylindrical structures increases with the decrease of diameters in $50{\sim}100{\mu}m$ range. In $100{\sim}200{\mu}m$ range, however, the breakdown voltage decreases slightly with the decrease of diameters. Also, as the diameter gets smaller, the electron heating efficiency is greatly improved.