• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.3
• /
• pp.189-196
• /
• 2010

In this paper, we proposed the adaptive local sigma filter reducing noises generated by an image sensor. The small noises generated by the image sensor are amplified by increased an analog gain and an exposure time of the image sensor together with information. And the goal of this work was the system design that is reduce the these amplified noises. Edge data are extracted by Flatness Index Map algorithm. We made the threshold adaptively changeable by the luminance average in this algorithm that extracts the edge data not in high luminance, but just low luminance. The Local Sigma Filter performed only about the edge pixel that were extracted by Flatness Index Map algorithm. To verify the performance of the designed filter, we made the Window test program. The hardware was designed with HDL language. We verified the hardware performance of Local Sigma Filter system using FPGA Demonstration board and HD image sensor, $1280{\times}720$ image size and 30 frames per second.

• ETRI Journal
• /
• v.42 no.2
• /
• pp.258-271
• /
• 2020

A correlation exists between luminance samples and chrominance samples of a color image. It is beneficial to exploit such interchannel redundancy for color image compression. We propose an algorithm that predicts chrominance components Cb and Cr from the luminance component Y. The prediction model is trained by supervised learning with Laplacian-regularized least squares to minimize the total prediction error. Kernel principal component analysis mapping, which reduces computational complexity, is implemented on the same point set at both the encoder and decoder to ensure that predictions are identical at both the ends without signaling extra location information. In addition, chrominance subsampling and entropy coding for model parameters are adopted to further reduce the bit rate. Finally, luminance information and model parameters are stored for image reconstruction. Experimental results show the performance superiority of the proposed algorithm over its predecessor and JPEG, and even over JPEG-XR. The compensation version with the chrominance difference of the proposed algorithm performs close to and even better than JPEG2000 in some cases.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.507-515
• /
• 2009

In this paper, we propose an image signal processor (ISP) for an ultra small HD-grade video sensor with 3A (AWB, AE, and AF) in camera phones that can process 720P/30fps videos. In order to enhance the video quality of the systems, it is necessary to achieve the high performance of the 3A. The proposed AWB algorithm multiplies the adjusted coefficients of color gains to the captured data of white objects. The proposed AE method adopts the index step moving based on the difference between an averaged Y luminance and a target luminance, together with IIR filters with variable time responses. The proposed AF technique controls the focus curve to find the lens position that maximizes the integrated high frequency components in luminance values by using highpass filters. Finally, we compare the image quality captured from our system to the quality of a commercial HD camcorder in order to evaluate the performance of the proposed ISP. The proposed ISP system is also fabricated with 0.18um CMOS flash memory process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.1
• /
• pp.48-57
• /
• 2013

This paper presents a power management system of the dye-sensitized solar cell (DSSC) for ubiquitous sensor network (USN) applications. The charge pump with a luminance-controlled oscillator regulates the load impedance of the DSSC to track the maximum power point (MPP) under various light intensities. The low drop-out regulator with a hysteresis comparator supplies intermittent power pulses that are wide enough for USN to communicate with a host transponder even under dim light conditions. With MPP tracking, approximately 50% more power is harvested over a wide range of light intensity. The power management system fabricated using $0.13{\mu}m$ CMOS technology works with DSSC to provide power pulses of $36{\mu}A$. The duration of pulses is almost constant around $80{\mu}s$ (6.5 nJ/pulse), while the pulse spacing is inversely proportional to the light intensity.

• Journal of Korea Multimedia Society
• /
• v.13 no.1
• /
• pp.66-75
• /
• 2010

We proposed an occupant sensing system using single video camera and ultrasonic sensor for the advanced airbag. To detect the occupant form and the face position in real-time, we used the skin color and motion information. We made the candidate face block image using the threshold value of the color difference signal corresponding to skin color and difference value of current image and previous image of luminance signal to gel motion information. And then it detects the face by the morphology and the labeling. In case of night without color and luminance information, it detects the face by using the threshold value of the luminance signal get by infra-red LED instead of the color difference signal. To evaluate the performance of the proposed occupant detection system, it performed various experiments through the setting of the IEEE camera, ultrasonic sensor, and infra-red LED in vehicle jig.

• Journal of Korea Multimedia Society
• /
• v.13 no.5
• /
• pp.641-650
• /
• 2010

Color image sensors (CIS) output color images through image sensors and image signal processing. Image sensors that convert light to electrical signal are divided into CMOS image sensor and CCD image sensor according to transferring method of signal charge. In general, a CIS has RGB output signals from tri-stimulus XYZ of the scene through image signal processing. This paper presents an adaptive colorimetric analysis method to obtain chromaticity and luminance using CIS under various environments. An image sensor for the use of colorimeter is characterized based on the CIE standard colorimetric observer. We use the method of least squares to derive a colorimetric characterization matrix between camera RGB output signals and CIE XYZ tristimulus values. We first survey the camera characterization in the standard environment then derive a SGL(shutter-gain-level) function which is relationship between luminance and auto exposure (AE) characteristic of CIS, and read the status of an AWB(auto white balance) function. Then we can apply CIS to measure luminance and chromaticity from camera outputs and AE resister values without any preprocessing. Camera RGB outputs, register values, and camera photoelectric characteristic are used to analyze the colorimetric results for real scenes such as chromaticity and luminance. Experimental results show that the proposed method is valid in the measuring performance. The proposed method can apply to various fields like surveillant systems of the display or security systems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.2D
• /
• pp.219-223
• /
• 2006

Variable Message Sign(VMS) is one of the most popular travel information system. In this study, the evaluation categories, each category's datum value and evaluation procedure for enhancing the visibility of VMS are studied and the physical evaluation system is developed. The evaluation categories have been developed based on the analysis of previous guidelines used in Korea, Europe and the United States. The evaluation categories include luminance, luminance ratio, beam width, color, and uniformity. The physical evaluation system consists of goniometer, solar simulator, luminance meter, sensor and rack system. As a result of this study, the quantitative and effective evaluation of VMS visibility would become possible.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.129-138
• /
• 2009

While the issue of caring for the elderly that faces the modern society has reached a serious level, it is expected that it will be particularly true in the Republic of Korea where an aged, not an aging, society is impending. In this paper I did research on establishing behavioral model of residents who dwell in home or welfare facilities. I suggested a behavioral model in daily living, $W_{ip}(n)$, based on event triggering. A multi-hop routing-based wireless luminance/temperature sensor network was built based on the proposed resident's behavioral model. 1 did experiments on behavioral activities of residents on the wireless sensor network system. According to experimental results. I could classify whether the daily activity of a resident someday is regular or not. These experimental results show that the proposed behavioral model is highly applicable in caring for residents in home or welfare facilities effectively in the future.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2015

This paper introduces the development of imaging luminance meter which measures the luminances of external/internal road tunnel. The developed imaging luminance meter complies with both L20 method and Veiling luminance method of the international standards, CIE88. In this paper the L20 method is mainly presented because most of tunnels currently adapt L20 method. The developed system has an embedded computer to operate at stand-alone. The system has a ethernet port, a heater, a fan, a defroster, a wiper and sun shielder. Compensation algorithm is applied for correcting non-linear responses to the luminance and integration time. The accuracy of measurement is less than 1% when it calibrated at the public certification institute. The developed system was also tested at the real field, road tunnel. The test results were very similar with the reference luminance meter and showed that the developed system operates well at the real field. Partial sensor saturations were happened to show the less luminance, because there were the high reflecting objects in the real field. Further study should be followed for high luminance measurement.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.77-85
• /
• 2016

OBJECTIVES : A fog generated field test was conducted to analyze the relationship between the luminance of variable speed-limit signs and the legibility distance under various fog density conditions. By using this study, appropriate luminance values can be selected depending on the density of fog. METHODS : An actual tunnel was selected as the area to conduct the test, as other places cannot maintain the fog condition because of rapid air current. Ninety-two subjects were recruited for this test, which took place during the course of three days. Visibility-distance detecting sensor was used to measure the visibility distance due to the fog density time, simultaneously with the evaluation of legibility distance by subjects. RESULTS : The test results show the relationship between luminance values and the legibility distance corresponding to the visibility distance due to fog. According to the technical test results, lower luminance value such as $7000cd/m^2$ corresponds to less legibility distance compared to higher values such as $20000cd/m^2$ or $40000cd/m^2$. However, the amount of difference between $20000cd/m^2$ and $40000cd/m^2$ is negligible in our test. CONCLUSIONS : The results of this study can be used to select appropriate luminance of valuable speed signs under fog conditions. Hence, drivers can expect to have more room to respond to adverse weather conditions, thereby reducing the risk of accidents.