• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.143-146
• /
• 2008

Dynamic range of LCD panel can be dramatically improved by adaptive dimming technique. Adaptive control of LED backlight by input signal can reduce the light leakage of LCD panel and achieve high contrast ratio. An algorithm is proposed to distinguish the input signal and get proper luminance level. For lower cost of LCD panel, white light LED is used to accomplish 2D dimming and get better image performance of LCD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.481-484
• /
• 2008

In order to reduce IR drop through common electrode in AMOLED, we propose a novel method to form electrical contact between highly-conductive bus lines and common electrode by using a plasma-assisted patterning of OLED layers and double deposition of the common electrode. Plasma-assisted patterning effects on OLED performance and degradation have been investigated. This patterning method caused turn-on voltage decrease, current flow increase at the same applied OLED voltages, quantum efficiency decrease, and rapid degradation at early stage during the lifetime test. However, comparable 70% luminance lifetime were obtained for both patterned and non-patterned OLEDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.509-512
• /
• 2008

In this study, colorimetric characteristics of a 2.2-inch iriver MP4 based upon OLED was evaluated and compared with another MP4 based upon Liquid Crystal Display (LCD). According to IEC61966-4, the two displays were tested in terms of spectral power distribution, tone reproduction curve (TRC), luminance, contrast, correlated color temperature, 2D color gamut and spatial uniformity. Consequently, the OLED showed better performance for the first four aspects but a similar quality was observed for the rest.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1573-1576
• /
• 2008

A simulation system is developed to calculate the apparent motion-induced image from a sequence of temporal luminance transitions, while using the properties of the human visual system. Based on the simulation method, both edge (moving block) and detail degradation (line spreading, grating, sinusoidal pattern), and also color aberration are discussed.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.223-231
• /
• 2015

LEDs have been widely used in lighting displays, automobiles, and airplanes owing to their excellent light output characteristics and long lifespan. Though LEDs are manufactured under the same process, variations in impurity concentrations cause electrical deviation among LEDs. The resulting electrical deviation can not only reduce the life time of the LED but also cause non-uniform luminance of LEDs connected in parallel. LED driving circuit is required to solve these problems. In this paper, we propose a LED driving system using Y-type current balancing transformer to maximize the efficiency of the system by removing output stage Schottky diodes. Experimental results are presented to verify the performance of proposed LED driving system that is applied to 80 W LED modules.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.998-1001
• /
• 2006

Highly stable organic electroluminescent devices have been achieved by treatment of thermal and electrical annealing. We investigate here the performance of theses devices at temperatures and pulse aging. We also demonstrate improved device stability due to thermal and electrical treatment, and the brightness decays at no treatment, thermal only, electrical only and thermal/electrical treatment were 86.6%, 89.5%, 93.0%, and 96.7%, respectively, in the after 150 h of operation driven with an initial luminance of $1,000\;cd/m^2$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1018-1023
• /
• 2006

The metal chelate complex of aluminum 8-hydroxyquinolines $(Alq_3)$ is an important electro-luminescent (EL) material used in fabricating organic light emitting (OLEDs). In this work, diodes / displays using in house synthesized $Alq_3$ and simple structure have been fabricated. It is demonstrated that luminance of $12460\;cd/m^2$ and efficiency of 3.1 cd/A are achievable in these fluorescent devices. Possible degradation effects are analyzed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1503-1506
• /
• 2005

This dissertation represents method concerning high performance prism LGP design in 17 inch TFT-LCD. By means of developing LGP with total size of 8mm that has prism on both upper side and bottom side, it is superior to previous printing way in gaining high brightness. It can realize actual material simulation on prism LGP production using 17inch injection process and about 20% luminance enhancement is achieved based on such method.

• Journal of the Korean Institute of Educational Facilities
• /
• v.9 no.5
• /
• pp.13-21
• /
• 2002

Daylighting in educational environment is very important as it has an effect on students' performance as well as in their visual health. It is regarded as a good energy conservation method in saving energy used for lighting. This study conducted initial daylight measurements to analyze luminous environment in classrooms of Korean elementary school. The results indicated that the typical classroom had a reasonable level of daylight. However, it also found that the classroom had some problems of the uniformity of illuminance and the contrast of brightness of surfaces in the classroom. It is argued that daylighting design for school classroom should consider these aspects to make daylit classrooms ideal so as to provide comfortable visual environment.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.3
• /
• pp.121-124
• /
• 2007

The $Zn_2SiO_4:Mn$ phosphors were prepared using polymer matrix technique in order to improve the performance of green emitting phosphors for plasma display panel(PDP). $Zn_2SiO_4:Mn$ phosphor exhibits a strong green emission around 520-530 nm. The emission intensity and particle size of powders were controlled by sintering temperature and raw material composition. The zinc silicate $Zn_2SiO_4:Mn$ single phase were obtained at lower temperature than prepared by solid-state reaction method. PL luminance of $Zn_2SiO_4:Mn$ phosphor was similar to the commercial material.