• 조명전기설비학회논문지
• /
• 제22권9호
• /
• pp.1-7
• /
• 2008

본 연구의 목적은 형광등조명기구와 LED 조명기구와의 물리적 특성을 비교하여 LED조명기구의 기본적인 특성을 분석하는데 있다. 여기서 두가지 조명기구의 균제도 및 휘도분포 측면에서 비교 분석하여 LED조명기구를 건축실내공간에 적용하기 위한 자료를 작성하였다. 연구는 4단계로 나누어 진행하였다. 첫째, 기존의 조명기구와 비교한 LED조명광원의 이론적인 검토를 하였다. 둘째, 연구의 목적에 부합되도록 실험변인을 조절할 수 있는 실물대모형(Mock-up)을 제작하였다. 셋째, 설치된 실물대의형을 이용하여 조명기구별 균제도 휘도분포를 측정하였다. 최종적으로, 기존의 형광등기구와 LED조명기구간의 균제도 휘도분포 특성을 비교분석하였다. 연구결과 LED조명기구가 균제도 0.569로 기존 형광등조명기구의 균제도 0.522보다 높아 균일한 조도분포 특성을 보이고 전반확산이 양호한 것으로 나타났다. 또한 휘도분포를 측정한 결과 LED조명기구가 보다 균일한 휘도분포 특성을 보였고, 벽면의 휘도분포는 형광등조명기구에 의한 최대휘도가 $180.6[cd/m^2]$, LED조명기구는 $155.26[cd/m^2]$로 형광등이 높고, 평균휘도는 형광등조명기구가 $44.32[cd/m^2]$, LED조명기구가 $58.65[cd/m^2]$로 LED조명기구가 높게 나타났다. 이상의 결과로 볼 때, LED조명기구가 형광등조명기구보다 재실자에게 보다 쾌적한 작업환경을 구성할 수 있는 조명이라 판단된다.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.755-760
• /
• 2023

In this paper, an illumination optical system that can mitigate the saturation phenomenon in the center of an image (caused by the typical flexible-endoscope illumination system using LEDs with Lambertian light distribution) is designed. When an LED with Lambertian light distribution is used as a light source, the amount of light in the center of the endoscopic illumination system is relatively high, compared to the periphery, causing saturation in the image. Since this phenomenon causes difficulty in detecting the patient's lesion, it is necessary to find a lighting-system design that can alleviate the saturation phenomenon. Therefore, in this paper a lighting system with bat-wing light distribution, which can lower the intensity at the center and secure the maximum amount of light at the maximum light distribution angle, is designed. In addition, to check the performance of the designed lighting system, a simulation of illumination and luminance is conducted for a system using a common aspherical lens with otherwise the same components. As a result, it is confirmed that the lighting system designed in this paper effectively reduces the luminance value at the center and secures more luminance values at the periphery than the familiar lighting system.

• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.10-17
• /
• 2009

야간경관에는 수많은 광원(光源)에 의해 다양한 휘도(Luminance)로 나타난다. 휘도를 측정하는데 있어 측정 범위가 한정되어 있다. 기존의 휘도계를 이용한 측정방식은 하나의 점을 통한 점(Point)측정방식이기 때문이다. 야간경관의 휘도를 쉽고 편리하게 정보를 얻고자 휘도 측정에 있어 DSLR 카메라를 이용하게 되었다. 현재 광학의 기술로 인해 디지털 카메라의 활용가치가 매우 크며 쉽게 이미지데이터를 얻을 수 있다. 이러한 디지털 이미지로부터 야간경관의 휘도 분석과 DSLR 카메라의 면(Scene) 측정방식을 통한 휘도 측정 기법에 대해 제안하고자 한다.

• 조명전기설비학회논문지
• /
• 제20권6호
• /
• pp.1-8
• /
• 2006

본 연구는 휘도측정장비인 CS-100과 ProMetric 1400을 활용하여 조망점의 변화에 따른 교량 경관조명의 휘도를 분석한 것이다. 이를 위하여 경관조명이 적용된 한강의 교량4개를 교량형태별로 선정하고 조망유형에 따라 한강둔치에서 바라본 조망(투시뷰), 교량주변 건물에서 바라본 조망(건물뷰), 그리고 교량 위 주행자가 바라본 조망(주행뷰) 등 3가지로 분류하였다. 연구대상의 주변하늘, 강물표면, 상부구조물, 상판측면 그리고 교각에 대한 휘도분포를 측정하였다. 분석결과, 광진교와 동호대교는 투시뷰의 휘도가 높게 나타났으며, 올림픽대교와 동작대교는 건물뷰의 휘도가 높게 나타났다. 따라서 거더교와 같이 상부구조물이 없는 교량에서는 투시뷰가, 사장교 및 아치교와 같이 상부 구조물이 있는 교량에서는 건물뷰가 경관조명의 특성을 크게 반영하는 휘도분포가 강하게 나타났다.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.97-103
• /
• 2010

Sky simulator is a effective daylighting design tool that can evaluate three dimensional performance of lighting. Especially, the dome type sky simulator offer reliable and reproducible daylighting performance with different standard sky models. Recently, K university has developed the dome type sky simulator(sky dome) with the diameter of 6.5m and the height of 3.7m. The sky dome consists of a group of 145 large steel panels with 72 halogen lamps which are arranged in a circular array. The luminance distribution of the sky dome can be calibrated by changing the angle and the brightness of the lamps respectively. To allow more reliable prediction and evaluation of daylighting through the sky dome, It is essential to validate the sky luminance distribution of the sky dome. This study consider the validation of the comparisons between the measured and the calculated luminance values for the CIE standard overcast sky. Also, the error rate between the measured and the calculated luminance values were compared to the previous studies. The results indicated that the K university sky dome can reproduce reliable CIE standard overcast sky with the average relative error rate of 4.4% and root-mean-square error(RMSE) of 5.4%.

• KIEAE Journal
• /
• 제7권1호
• /
• pp.65-72
• /
• 2007

As ecological design elements, daylighting can be applied to provide adequate illumination on visual tasks to create an attractive visual environment and to save electrical energy. Daylighting control systems reject direct sunlight and penetrate it onto the ceiling or to deep into the room. This study aims to evaluate the luminance environment of sloped light guide with automated venetian blind systems according to sun angle changes. For evaluation, a mock-up model was used and the south facing side-window mounted between the clerestory window and the view window. To assess luminance performance, 3 view points of luminance were monitored. As results, the conventional and lightshelves show ideal luminance ratio between workplane and surroundings(3:1) and workplane and darkness area(2:1) due to total ratio of surroundings and darkness area has lower ratio than workplane. Compared to the lightshelves window, conventional window shows unrelieved effect in between the workplane and brightness area(1:5). It means that there has low deviation according to the required standards. Also, compared to the ratio between the brightness area and darkness area(2~6:1) conventional window with high deviation(10~20:1) provide discomfort glare due to the excessively strong contrast, while lightshelves window shows a required luminance ratio that provide a three-dimensional effect to occupants. Therefore, luminance distribution indicate that application of a lightshelves and blinds not only has a significantly positive effect but also offers higher luminance quality in a daylit room

• 한국디지털건축인테리어학회논문집
• /
• 제12권2호
• /
• pp.33-38
• /
• 2012

The purpose of luminance measurement in lighting design of urban scale is to prevent light trespass and light pollution, caused by over-bright. Specially, the illumination of road, tunnel and sports complex as urban infrastructure is measured by international standard for illuminance and luminance. It has been used the spot luminance meter and the image photometer to define the characteristics of qualitative and quantitative in exterior lighting. This study introduced the concept of HDR Image, procedure of HDR Image creation and analysis. Applications of HDR Image, particularly within the apartment building exterior lighting design analysis, have been demonstrated. The procedure proposed in this study is a affordable method that is useful for the assessment of luminance distribution in the scene with electric light. It also provides a measurement capability with the high resolution luminance data within a large field of view efficiently and quickly, which is not possible to achieve with a luminance meter.

• 한국도로학회논문집
• /
• 제16권3호
• /
• pp.85-99
• /
• 2014

PURPOSES : This study has been performed with the objective to determine threshold zone luminance of adaptation luminance by target safety level in a vehicular traffic tunnel with design speed set at 100km/h. METHODS : The study made a miniature capable of portraying changes in luminance distribution within $2{\times}10^{\circ}$ conical field of view of the driver approaching to the tunnel for the test. Test conditions were set based on justifications for CIE 88-1990's threshold zone luminance used as a reference by domestic tunnel light standards (KS C 3703 : 2010). Luminance contrast of object background and object is 23%, object presentation duration is 0.5 seconds, and size of the object background is $7.3{\times}11.5m^2$ RESULTS : Threshold zone luminance was set within adaptation luminance of $100{\sim}3,000cd/m^2$. Adaptation luminance and threshold zone luminance based on 50%, 75% and 90% target safety level all showed a relatively high linear relationship. According to findings in the study, it is not appropriate to specify the relationship between adaptation luminance and threshold zone luminance as luminance ratio. Rather, direct utilization of the linear relationship gained from the study findings appears to be the better solution. CONCLUSIONS : Findings of this study may be used to determine operation of threshold zone luminance based on target safety level. However, a proper verification and validity of test results are required. Furthermore, a study to determine proper threshold zone luminance level considering target safety level reviewed in this study and various decision-making factors such as economic conditions in Korea and energy-related policies should be carried out in addition. Additional tests on adaptation luminance greater than $3,000cd/m^2$ will be performed, through which application scope of the test findings will be broadened.

• 한국생활환경학회지
• /
• 제20권2호
• /
• pp.233-237
• /
• 2013

Daylighting affects the luminous environment and provides comfortable environment to the occupants. However, excessive daylighting might have negative influences on the visual comfort. Skylight, light intensity and distribution, and insolation could cause glare effects on the occupants. This study analyzed the effect of fenestration on the interior glare effects, and verified luminous environment adjustability through mock up test of conventional fenestration and 'Convergence Window System' by analyzation of luminance, luminance contrast, and glare effect. Consequently, room installed Convergence Window System was improved luminance contrast and PGSV Level.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.135-143
• /
• 2000

This parer is the among educational environment, lighting's role is more important since it improves the visual tasks, capability of work, and it help to build both balanced mind and body. Also, since students need spend most of their time inside rather than outside, students need appropriate illuminance everyday. If optimum illuminance and distribution of luminance is properties controlled, people can decrease the fatigue of eyes, and also, people can maximize their efficiency of work. This present studying class chose of two school measured illuminance using the computer simulation improved ratio of luminance and luminance by distribution of lighting improve the economy and energy saving.