• KIEAE Journal
• /
• v.10 no.2
• /
• pp.71-78
• /
• 2010

Spill light by street lighting is a kind of light pollution creating cozy night atmosphere, interfere visual private and cause insomnia at night. This study was to survey light trespass of the windows in residential buildings. According to outdoor lighting control guidance in Seoul, three different areas were selected to investigate the trespass light to windows. The results were as follows: 37% of the buildings of 386 buildings were influenced by street lighting, and 47% of windows were occurred light trespass. Therefore, the street lighting affected light trespass at night in survey area. The main reasons of light trespass were luminaire type, luminaire pole height, and street width. For protecting the light trespass to windows, it is necessary to non-cutoff fixture to full cutoff fixture by the street width.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.25-28
• /
• 2008

수은이 함유된 방전등과 같은 조명기구의 사용이 제한되는 특수구역의 산업용 조명설비로 200 W 이상의 높은 소비전력의 백열등기구들이 사용되고 있다. 인공광원으로 백열전구는 매우 낮은 발광효율로 전력소모가 많고, 높은 방사열로 인해 화재의 염려가 있어 램프보호유리구를 장착하므로 낮은 조명률로 광 손실이 높게 발생한다. 또한 산업지역 내에서는 일반적으로 각종 전동기 및 공기조화 설비의 가동으로 진동이 심하며 여기에 백열전구 사용 시 당초 예상되는 수명보다 더욱 단축되고 있다. 이러한 지역에 설치된 백열등을 조명등기구 효율(Luminaire Efficacy)이 높은 친환경 에너지 절감형 차세대 광원인 LED조명등으로 대체하여 산업설비 지역 내 공급되는 조명용 소비전력을 크게 줄여 에너지 절약효과를 높임과 동시에 양호한 조명율의 LED광원을 사용함으로써 조명환경 개선에 따른 작업능률을 높이기 위해 특수지역의 산업용 LED조명등을 개발하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.19-25
• /
• 2007

We studied prism design method for actual light source that have bulk in order to accomplish particular intensity distribution. When we know incidence angle and try to send ray to given direction, numerical formula that yields prism vertical angle, and then vertical angles were calculated sequentially. After analyzing problem that supposing to point light source, supplemented this and derived applicable prism design method on bulk light source. The intensity distribution and efficiency that came out by each design results were compared and analyzed, we got improved results through supplemented design method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.4
• /
• pp.390-397
• /
• 2012

According to sailing condition, an exciting force for luminairie of naval vessels was measured and analyzed. A naval combat service support boat and P${\bigcirc}{\bigcirc}$(patrol killer guided missile) were selected as a target naval vessel. Due to their small size and fast speed, they received excessive vibration than other bigger naval vessels like destroyer. The vibration of luminairie was measured on their cruising and maximum speed. This could analyze exciting force for luminairie of naval vessels. Using this analyzed data, the validity of military standard for naval vessel was verified.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.13-19
• /
• 2003

Giving teachers and students the clean visual environment, the classroom lighting is an important part that prevents the decrease of the visual acuity and improves the studying environment. In order to improve the classroom lighting, a proper blackboard luminaire is to be developed. This paper explains how to design the optical form of the high efficient reflector which offers the uniform illuminance at the vertical surface of the blackboard and, after all, the problem of a large source in reflector design process is explained.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.05a
• /
• pp.13-16
• /
• 2009

Currently, Lighting systems have undergone improvements with its convergence with information technology. However, compared to the developments in Night-Scape lighting, designers are facing difficulties in having efficient access to information. Also, the cost and time it takes to undergo research for benchmarking previous cases is exceptionally high. Thus, this study will investigate the current trend of luminaire, and Night-Scape lighting in buildings, Street furniture, and signboards that has incorporated IT techniques from domestic and abroad. From these findings, the research aims to establish a database composition that categorizes luminaire and its different applications.

• Magazine of the Korea Institute for Structural Maintenance and Inspection
• /
• v.17 no.3
• /
• pp.18-30
• /
• 2013

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.1-7
• /
• 2004

As we know, topography of korea is composed of many mountains. Also, the volume of traffic is increasing more and more nowadays. So, many tunnels are being constructed to reduce cost of transport and time. Thus, tunnel illumination was considered as the most important thing to make safe traffic conditions. In the past, we installed luminaires on the wall in tunnel, but currently we are installing those on the ceiling. Wherever luminaires are installed on the ceiling, the electric designer may not have known the proper point to install luminaires. Therefore, we researched this project to resolve above problems with abundant experience and accurate data through simulation(Lightscape program). As a result of research, mounting luminaires on the ceiling are better than wall because uniformity is more regular and utilization factor is also higher and then brightness is adequate as well, whereby installation on the ceiling is economical. Therefore, it is suitable that luminaires are installed on the ceiling in tunnel than wall.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04a
• /
• pp.65-69
• /
• 2009

Generally Lighting system consists of lamp and luminaire. When a fluorescent lamp is installed in luminaire, power and light output is changed by ambient temperature. Particularly electrodeless lamp depends on the changes that are mercury pressure with amalgam temperature and magnetic properties with ferrite temperature. It has finally influence on optical efficiency. In this study, the temperature change of ferrite and cold spot, vessel are measured at transitional state and then same characteristics are measured with increase of ambient temperature. At transitional state, luminous flux is related to temperature change of cold spot that compare with behavior of mercury pressure and light output. At increase of ambient temperature, we analyzed change that efficiency and electrical, optical characteristics of electrodeless lamp are related to ferrite core and cold spot temperature.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.3
• /
• pp.18-25
• /
• 2014

In this paper, tried to find out the proper luminous intensity distribution for the cabin with low-level height by analyzing the changing tendency of discomfort glare according to luminous intensity distribution of marine indoor luminaires using Unified Glare Rating(UGR). First, we analyzed UGR of the indoor luminaires in the existing cabin, and then evaluated influence on luminous intensity distributions of marine indoor luminaire. The results showed that $cos^2{\Theta}$ distribution got almost low UGR results regardless of height and UGR 16.5 in cabin height of 2m. However, Gaussian distribution with the same beam angle showed that UGR results consistently increased by getting lower height and UGR 20.7 in the same height. In conclusion, the $cos^2{\Theta}$ distribution in consideration of luminous intensity on the direction of observer's eye was appropriate for general cabin indoor luminaires because it decreased UGR in the low-level height.