• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.152-157
• /
• 2003

Diesel-contaminated soils were ozonated for different times (0 - 900 min) and incubated for 9 wk to monitor petroleum hydrocarbons (PH)-degradative potential of indigenous microorganisms in the soils. Increased ozonation time decreased not only concentration of PH but also number of microorganisms in the soils. Microorganisms in the ozonated soils increased during 9-wk incubation as monitored by culture- and nonculture-based methods. Higher (1-2 orders of magnitude) cell number was observed by quantitative analysis of soil DNA using probes detecting genes encoding 165 rRNA(rrn), naphthalene dioxygenase (nahA), toluene dioxygenase (todC), and alkane hydroxylase (alkB) than microbial abundance estimated by culture-based methods. Such PH-degraders were relatively a few or under detection limit in 900-min ozonated soil. Further PH-removal observed during the incubation period supported the presence of PH-degraders in ozonated soils. Highest reduction (25.4%) of total PH (TPH) was observed in 180-min ozonated soil white negligible reduction was shown in 900-min ozonated soil during the period, resulting in lowest TPH-concentration in 180-min ozonated soil among the ozonated soils. Microbial community composition in 9-wk incubated soils revealed slight difference between 900-min ozonated and unozonated soils as analyzed by whole cell hybridization using group-specific rRNA-targeted oligonucleotides. Results of this study suggest that appropriate ozonation and subsequent biodegradation by indigenous microorganisms may be a cost-effective and successful remediation strategy for PH-contaminated soils.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1528-1538
• /
• 2018

In this paper, configuration of $1-{\phi}$ seven-level boost DC-link cascade based reversing voltage multilevel inverter (BDCLCRV MLI) is proposed for uninterrupted power supply (UPS) applications. It consists of three level boost converter, level generation unit and full bridge circuit for polarity generation. When compared with conventional boost cascaded H-bridge MLI configurations, the proposed system results in reduction of DC sources, reduced power switches and gate drive requirements. Inverter switching is accomplished by providing appropriate switching angles that is generated by any optimization switching angle techniques. Here, round modulation control (RMC) method is taken as the optimization method and switching angles are derived and the same is compared with various switching angles methods i.e., equal-phase (EP) method, and half-equal-phase (HEP) method which results in improved quality of obtained AC power with lowest total harmonic distortion (THD). Reduction in DC sources and switch count makes the system more cost effective. A simulation and prototype model of $1-{\phi}$ seven-level BDCLCRV MLI system is developed and its performance is analyzed for various operating conditions.

• Journal of Electrochemical Science and Technology
• /
• v.12 no.1
• /
• pp.101-111
• /
• 2021

To improve the potential of single chamber microbial fuel cells (SCMFCs) as an applicable technology, the main challenge is a practical application for larger scales bioenergy production from potent exoelectrogenic microorganism with real dairy wastewater. To increase power generation, three individual MFCs were together operated in series best under the fed batch condition for 15 days. The volume of MFC 1 and MFC 2 is "300 mL" and MFC 3 is "500 mL" respectively. The individual MFCs 1, MFC 2 and MFC 3 gives an open circuit voltage of 0.60 V, 0.66 V and 0.55 V and result in total working voltage when connected in series of 1.745V, which lead an LED to glow. The maximum power densities obtained from MFC 1, MFC 2 and MFC 3 are 62 mW/㎡, 50 mW/㎡ and 45 mW/㎡ (normalized to the surface area of the anodic electrode, which was 50 ㎠ for all three MFCs), and corresponding to current densities of 141 mA/㎡, 155 mA/㎡ and 123 mA/㎡, respectively. Therefore this work suggests the cheapest way to connect microbial fuel cells in series to gain power with the lowest operating cost and chemical oxygen demand (COD) removal.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.61-68
• /
• 2011

To assess the total cost with all stages of facilities, the feasibility of Life Cycle Cost (LCC) analysis was examined in this study to estimate the livestock manure treatment system and optimal decision making process. For the economic evaluation, the plant/equipment investment and annual operation cost of four Public Livestock Recycling Facilities, whose treatment capacity is 100 ton piggery manure per day, was compared. The initial cost was in the range of 2,699 million won to 3,202 million won, where T and E methods were highest and lowest, respectively. The annual operation cost was in the level of 378 million to 498 million won, which decreased in the following order : T method > J method > E method > B method. For the LCC analysis, 4.7% of interest rate, 3.13% of inflation rate, and 1.52% of net discount rate was considered by the data received from Bank of Korea and Statics Korea in the period of 2000 to 2009. Also, for the calculation of present value factor, the durable years of civil engineering & construction, machinery and electric instrument was 30 years, 10 years and 15 years, respectively. Based on these consideration, operation cost was in the range of 17,570 won/ton to 20,661 won/ton, and E method (17,570 won/ton) was economical and B method (20,661 won/ton) was non-economical. Though initial cost of T method was higher than that of B method, LCC analysis of T method was lower than that of T method due to the lower operation cost. Therefore, LCC analysis, which considers both initial cost and operation cost, is more reasonable evaluation method than either initial cost or annual operation cost. For the change of LCC analysis according to the uncertainty, the sensitivity analysis was carried out using fluctuation magnitude of discount rate in the period of 2000 to 2009. As a result, LCC analysis evaluated by discount rate was stable for the uncertain factors since the cost leadership did not change even though the sensitivity analysis varied. In summary, the economic evaluation using LCC analysis could be an efficient reference to choose the suitable livestock manure treatment plants. Furthermore, standardization of statement calculation for the actual cost analysis should be conducted and more detailed study is necessary to validate this summary. Therefore, the application of comprehensive technology evaluation, which considers LCC analysis, should contribute in obtaining objectivity and enhancing reliability for the 'Evaluation of Livestock Manure Treatment System and its Technology'.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.361-370
• /
• 2003

This paper attempts to improve the existing architecture of location register for location management in Private Network to Network Interface(PNNI)-based wireless ATM networks. Our approach enhances the hierarchical architecture of location registers based on a PNNI hierarchical architecture, which is referred to as the logical hierarchy architecture of location registers. This paper introduces a logical hierarchy architecture for location registers to reduce the cost of their location management. This logical hierarchy architecture of location registers begins with the lowest level physical location registers that are organized into clusters called logical groups. These logical groups are then represented in higher layers by logical nodes. These logical nodes are again grouped into clusters that are treated as single nodes by the next higher layer. In this way, all location registers are included in this tree-type logical hierarchy architecture. Compared with the existing physical hierarchy architecture of location registers, the analysis results show that the proposed logical hierarchy architecture can reduce the number of databases and thereby the average total location management cost.

• Korean Journal of Clinical Pharmacy
• /
• v.29 no.2
• /
• pp.79-88
• /
• 2019

Backgrounds: Inflammatory bowel disease (IBD) including ulcerative colitis (UC) and Crohn's disease (CD) increased prevalence and economic burden. Objectives: This study aimed to investigate drug use pattern in IBD patients in a real world. Methods: National Health Insurance claim data from 2010 to 2014 were used in this population-based study. All IBD patients diagnosed during study period were enrolled. IBD medications included 5-aminosalicylic acid (ASA), glucocorticoid, immunomodulator and anti-tumor necrosis factor-${\alpha}$ agent(anti TNF-${\alpha}$). Growth rate of IBD prevalence, prescribed drug classes, duration of drug therapy and medication cost were analyzed. Number and percentage of patients for categorical variables, and mean and median for continuous variables were presented. Results: Total numbers of patients were 131,158 and 57,286 during 5 years, and their annual growth rate were 3.2 and 5.7% for UC and CD. UC and CD were prevalent in the 40-50 (41.2%) and 20-30 age groups (36.0%). About 60% of IBD patients was prescribed any of medications. 5-ASA was the most frequently prescribed, followed by corticosteroid and immunomodulator. Anti TNF-${\alpha}$ use was the lowest, but 5 times higher than UC in CD. Combination therapies with different class of drugs were in 29% for UC and 62% for CD. Mean prescription days per patient per year were 306 and 378, and the median medication cost per patient per year was KRW 420,000 (USD 383) and KRW 830,000 (USD755), for UC and CD, respectively. Conclusions: Increasing prevalence of IBD requires further studies to contribute to achieve better clinical outcomes of drug therapy.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.483-490
• /
• 2014

The design procedures for a biological reactor and a secondary settling tank (SST) of an activated sludge system are based on the steady state design method (Ekama et al., 1986; WRC, 1984) and the 1-D flux theory design method (Ekama et al., 1997), respectively. This study combined both of the design procedures, to determine the optimum sludge concentration in the reactor and the best design with the lowest cost. The best design of the reactor volume and the SST diameter at the optimum sludge concentration were specified with varying wastewater and sludge characteristics, temperature, sludge retention time (SRT) and peak flow rate. The effects of the influent wastewater characteristics, such as substrate concentration and unbiodegradable particulate fraction, were found to be considerable, but the effect of unbiodegradable soluble fraction was to be negligible. The effects of sludge settling characteristics, were also significant. SRT, as an operating parameter, was found to be an important factor for determining the optimum sludge concentration. However, the effect of temperature was found to be small. Furthermore, for designing a large scale wastewater treatment plant, the number of reactors or SSTs could be estimated, by dividing the total reactor volume or SST area. The new combined design procedure, proposed in this research, will be able to allow engineers to provide the best design of an activated sludge system with the lowest cost.

• Journal of Climate Change Research
• /
• v.9 no.4
• /
• pp.377-384
• /
• 2018

The chamber method is widely used for measuring methane emission from paddy rice fields. The closed static chamber has advantages of easy installation and removal in the field and low manufacturing cost. However, the manual chamber method requires a lot of labor and has a limited sampling time and frequency. To overcome the disadvantages of the manual chamber, the auto-chamber system is used for measuring methane emission. We compared the differences in methane flux between the auto-chamber and manual chamber. To investigate methane emissions by the two methods, a chamber was installed for each of the following treatments : control without rice straw (NA), spring plowing after autumn rice straw application (SPRA) and autumn plowing after autumn rice straw application (APRA). The total methane emission was lowest in the control and highest in APRA with both methods. There was no significant difference in total methane emission between the methods, but dynamic fluctuation in methane with temperature change was accurately measured in the auto-chamber. Measuring methane emission with an auto-chamber system is expected to reduce uncertainty and increase accuracy, accompanied by labor reduction.

• Journal of Animal Science and Technology
• /
• v.63 no.6
• /
• pp.1232-1246
• /
• 2021

Recently, the cattle genome sequence has been completed, followed by developing a commercial single nucleotide polymorphism (SNP) chip panel in the animal genome industry. In order to increase statistical power for detecting quantitative trait locus (QTL), a number of animals should be genotyped. However, a high-density chip for many animals would be increasing the genotyping cost. Therefore, statistical inference of genotype imputation (low-density chip to high-density) will be useful in the animal industry. The purpose of this study is to investigate the effect of the reference population size and marker density on the imputation accuracy and to suggest the appropriate number of reference population sets for the imputation in Hanwoo cattle. A total of 3,821 Hanwoo cattle were divided into reference and validation populations. The reference sets consisted of 50k (38,916) marker data and different population sizes (500, 1,000, 1,500, 2,000, and 3,600). The validation sets consisted of four validation sets (Total 889) and the different marker density (5k [5,000], 10k [10,000], and 15k [15,000]). The accuracy of imputation was calculated by direct comparison of the true genotype and the imputed genotype. In conclusion, when the lowest marker density (5k) was used in the validation set, according to the reference population size, the imputation accuracy was 0.793 to 0.929. On the other hand, when the highest marker density (15k), according to the reference population size, the imputation accuracy was 0.904 to 0.967. Moreover, the reference population size should be more than 1,000 to obtain at least 88% imputation accuracy in Hanwoo cattle.

• Research in Community and Public Health Nursing
• /
• v.13 no.4
• /
• pp.648-667
• /
• 2002

This was a descriptive study designed to identify the level of coping method and its influencing factors on the family caregivers of demented patients, and resolve the family caregivers' level of stress. The data were collected from September 10 to October 10, 2001. Subjects for this study were recruited from four clinics, which were chosen from 15 clinics located in Chunbuk-Do as the study sites because of their cooperation for the study. They were similar in terms of size, the characteristics of the local community. and the population and registration status of the demented patients. The instruments used for the study were as follows: 1. Problematic behaviors of demented patients are measured by the Memory and Behavior Problem Checklist (Zarit, 1980), and the Linguistic Communication Symptoms Questionnaire (Bayles and Tomoeda, 1991) 2. The ability to carry out daily activities was measured using the Barthel Index (1965) and Katz Index (1963), which as well-known ADL assessment methods. 3. Burden was measured using Cost of Care Index by the Kosberg and Cairl (1986). 4. Coping strategy was measured Bell's 18 methods (1977). The data were analyzed using SPSS/PC. The study results were as follows: 1. The total stress score was 2.90 out of a maximum score of 5. The highest score reported was 3.09 on the dimension of restriction of individual and social activities, and the lowest region reported was 2.58 on the dimension of mental and physical health. 2. The total score of the coping method was 2.65 out of a maximum score of 5. The highest score reported was 4.01 on the dimension of thinking that includes an ideation such that it is better than any possible worst case, and the lowest score reported was 1.45 on the dimension of the self-image as a scapegoat. 3. There were significant differences in coping method among the subjects by age (F=2.752 p=0.04), caregiver (F=4.33 p=0.003), care-giving period (F=2.68 p=0.049), and dementia stage (F=2.87 p=0.034). 4. There were highly negative correlations ($\gamma$=-0.301 p=0.000) between problematic behaviors of demented patients and the coping method of their family caregivers. The highest correlation coefficient ($\gamma$=-0.339 p=0.000) was found between aggressive behaviors of the demented patients and the coping method of their family caregivers. 5. There was a low negative correlation ($\gamma$=-0.201 p=0.019) between the ADL of the demented patients and the coping method of their family caregivers. 6. There were highly negative correlations ($\gamma$=-0.213 p=0.005) between stress and the coping method of the family caregivers. The highest correlation was found between financial burden ($\gamma$=-.327 P=.000) and the coping method of the family caregivers. There was no significant correlation among unpleasant aspects of the demented patients, willingness to the demented patients, and the coping method of the family caregivers.