• 제목/요약/키워드: lower EMI

검색결과 52건 처리시간 0.023초

기생 커패시턴스 저감형 공통모드초크의 특성해석에 관한 연구 (A Study on Characteristics Analysis of Common-Mode Choke with Reduced Parasitic Capacitance)

  • 원재선;김희승;김종해
    • 전력전자학회논문지
    • /
    • 제20권2호
    • /
    • pp.137-143
    • /
    • 2015
  • This paper presents the intra capacitance modeling based on the winding method and section bobbin for CM choke capable of EMI attenuation of broad bands from lower to higher frequency bands and high frequency type common-mode choke capable of EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. The case of high frequency type CM choke can be explained by the parasitic capacitance of three types of CM choke. The winding method of section bobbin type is smaller than the others. The first resonant frequency of the proposed CM choke tends to increase as the parasitic capacitance becomes small and its impedance characteristics improved performance as the first resonant frequency increases. The CM chokes of the proposed section bobbin type shows that in the future, the method may have practical use in LED/LCD-TV SMPS and in several applications, such as LED lighting, adapters, and so on.

The TROPHY (Talented Role-playing Technology with a Dual Polarity Sustainer in Hybrid Mono Board) Driving Method

  • Park, Chang-Joon;Kwak, Jong-Woon;Kim, Tae-Hyung;Park, Hyun-Il;Moon, Seong-Hak
    • Journal of Information Display
    • /
    • 제7권4호
    • /
    • pp.24-26
    • /
    • 2006
  • We have developed a new driving method named TROPHY(Talented Role-playing Technology with Dual Polarity sustainer in Hybrid Mono board). In this method, the sustain voltage is partially compared to the conventional method and the number of power sources is reduced by voltage level unification during the reset, address and sustain period. The hybrid mono board was especially developed to implement those technologies. Through this, we can lower the cost with the TROPHY compared to the conventional one. It is a suitable technology to improve the reliability of circuit and image sticking problem. We can also reduce the number of driving boards and the EMI problem compared with those of the conventional method.

지상탱크 저판부의 부식손상 평가를 위한 음향방출 신호의 분석 (Characteristics of Corrosion Damages in Bottom Plate of Above Ground Tank by Acoustic Emission Signal)

  • 김승대;정우광;이종오
    • 한국가스학회지
    • /
    • 제11권4호
    • /
    • pp.64-72
    • /
    • 2007
  • 충수된 지상 탱크 저판부에서 발생하는 AE 신호 특성을 관찰하여 누수 등 손상에 대한 신호를 분석, 평가하였다. EMI 잡음신호를 에너지, 카운트. 지속시간 등과 누적진폭 분포상의 기울기를 비교 분석하여 제거하였다. EMI 신호는 높은 에너지 카운트, 지속시간을 나타내며, 누적 분포상에서 큰 기울기를 갖는 특성을 보였다. 남은 AE 신호의 위치표정과 클러스터 분석을 통해 부식손상의 가능성을 추정할 수 있었으며 총 20개의 클러스터로 에너지는 최대 11,990에서 8,565까지 이벤트는 최대 8에서 5까지 나타났다. 개방에 의한 손상확인을 하지 못했으나 보다 높은 고감도의 센서와 문턱값을 60dB 이상 높여서 평가한 다면 보다 정확한 발생위치 추정이 가능하리라 본다.

  • PDF

Flexural, electrical, thermal and electromagnetic interference shielding properties of xGnP and carbon nanotube filled epoxy hybrid nanocomposites

  • Lee, Young Sil;Park, Yeon Ho;Yoon, Kwan Han
    • Carbon letters
    • /
    • 제24권
    • /
    • pp.41-46
    • /
    • 2017
  • The microstructure, flexural properties, electrical conductivity, thermal conductivity and electromagnetic interference (EMI) shielding effectiveness (SE) of epoxy composites filled with multi-walled carbon nanotubes (CNTs), exfoliated graphite nanoplatelets (xGnPs) and CNT-xGnP hybrid filler were investigated. The EMI SE of the CNT-xGnP hybrid composite was higher than 25 dB at 100 MHz while that of the xGnP based composite was almost zero. The flexural modulus of the CNT-xGnP based epoxy composite continuously increased to 3.32 GPa with combined filler content up to 10 wt% while that of the CNT based epoxy composites slightly decreased to 1.96 GPa at 4 wt% CNT, and dropped to 1.57 GPa at 5 wt% loading, which is lower than that of epoxy. The CNT and CNT-xGnP samples had the same EMI SE at the same surface resistivity, because samples with the same surface conductivity have the same amount of the charge carriers.

SMPS 구동 대형교통 신호용 LED 신호등의 특성 (Characteristics of LED Signal Lamp Driving by SMPS for Large-scale Traffic Signal)

  • 신현용
    • 한국전자통신학회논문지
    • /
    • 제6권5호
    • /
    • pp.643-648
    • /
    • 2011
  • 본 연구에서는 공항, 철도, 항만 등 대형 교통수단의 표시등으로 사용하기 위하여 SMPS에 의하여 구동되는 LED 신호등을 설계하고 제작된 LED 신호등의 전기적 특성과 EMI 특성을 조사하였다. 10V 이상의 교류 및 직류입력전압에 대한 출력전류는 1.67A이었다. 0.15~30MHz에서 측정한 잡음단자전압은 허용기준 준첨두치와 허용기준 평균치 보다 낮았으며, 30~1000MHz에서 측정한 잡음전계강도는 59.96MHz에서 $23.96dB{\mu}V/m$이었다.

권선 방식에 의한 공통 모드 초크의 특성해석에 관한 연구 (A Study on Characteristics Analysis of Winding Method for Common-Mode Choke)

  • 원재선;김희승;김종해
    • 전력전자학회논문지
    • /
    • 제19권1호
    • /
    • pp.8-14
    • /
    • 2014
  • This paper presents the intra capacitance modeling according to the winding method and section bobbin for CM choke capable of the EMI attenuation of broad bands from lower frequency bands to higher frequency bands and high frequency type common-mode choke capable of the EMI attenuation of high frequency band used in the EMI Block of LED-TV SMPS. In case of high frequency type CM choke, it can be explained the parasitic capacitance of A type and section bobbin type winding methods among them is much smaller than the other. The first resonant frequency of the proposed CM choke tends to increase as the parasitic capacitance becomes small and its impedance characteristics also show improved performance as the first resonant frequency increases. In the future, the CM chokes of high frequency type show it can be practically used in not only LED/LCD-TV SMPS but also several applications such as LED Lighting, Adapter and so on.

GBN/SSN 억제를 위한 이종 셀 EBG 구조를 갖는 전원면 (A Power Plane Using the Hybrid-Cell EBG Structure for the Suppression of GBN/SSN)

  • 김동엽;주성호;이해영
    • 한국전자파학회논문지
    • /
    • 제18권2호
    • /
    • pp.206-212
    • /
    • 2007
  • 본 논문에서는 넓은 영역에서 GBN/SSN 억제 특성을 보이는 이종 셀 EBG 구조를 이용한 새로운 전원면 구조를 제안하였다. 제안된 구조는 -30 dB 이하의 삽입 손실로 정의되는 저지 대역이 GBN의 에너지가 집중적으로 분포하는 수 백 MHz에서 시작하며 약 7.9 GHz의 넓은 대역폭을 갖는다. 본 구조의 특징은 인덕턴스를 강화하는 나선형 연결 선로와 분산적 LC 회로의 주기를 줄이는 이종 셀을 추가한 것이다. 그 결과 -30 dB 저지 대역의 저주파에서의 차단 주파수가 낮아짐은 물론 대역폭이 넓어진 특성을 보였다. 또한, 전원면과 접지면 사이의 구조적 공진 모드가 현격히 억제되었으며 평행판 도파관에 비해 낮은 EMI 특성을 보였다.

낮은 전자기 간섭 특성을 가진 차내 통신을 위한 데이터 송신기 설계 (Design of a Low EMI Data Transmitter for In-Vehicle Communications)

  • 박준영;전현규;이원영
    • 한국전자통신학회논문지
    • /
    • 제18권4호
    • /
    • pp.571-578
    • /
    • 2023
  • 본 논문에서는 차내 통신을 위한 데이터 송신기에 지연고정루프를 접목한 회로를 제안한다. 낮은 전자기 간섭 특성을 가진 송신기의 설계를 위해 낮은 슬루율을 가지며, 회로 소자의 공정에 따른 변화로 인한 슬루율 변화량을 보정할 수 있는 지연고정루프를 적용하였다. 시뮬레이션 결과에 의하면, 지연고정루프가 적용된 송신기는 기존의 송신기보다 낮은 슬루율 변화량을 가진다. 제안한 구조의 회로는 65nm 공정으로 설계되었으며, 데이터 전송속도는 20Mbps, 공급전압은 1.1V이다. 지연고정루프가 있는 송신기는 기존의 송신기에 대비하여 빠른 조건에서 53.6% 낮은 슬루율 변화량, 느린 조건에서 13.07% 낮은 슬루율 변화량을 가진다.

LED-TV용(用) 전원장치에 적합한 기생 커패시턴스 저감형 Hybrid 초크 코일의 특성 해석에 관한 연구 (A Study on the Characteristics Analysis of Hybrid Choke Coil with Reduced Parasitic Capacitance suitable for LED-TV SMPS)

  • 이종현;김구용;김종해
    • 전기전자학회논문지
    • /
    • 제22권1호
    • /
    • pp.185-188
    • /
    • 2018
  • 본 논문은 LED-TV용 SMPS EMI 감쇄 필터에서 적용되고 있는 저주파와 고주파의 광범위한 대역에서 EMI 감쇄가 가능한 기생 커패시턴스 저감형 Hybrid 초크 코일의 코일 구조, 권선 방법 및 섹션 보빈에 따른 기생 커패시턴스 임피던스 모델링을 나타내고 있다. 특히 본 논문에서 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일은 평각 동선 권선방법을 채택함으로써 기존의 자동 권선형 공통 모드 초크 코일에 비해 기생커패시턴스($C_p$)을 저감할 수 있다. 기생 커패시턴스($C_p$)가 작아짐에 따라 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일의 1차 공진 주파수는 증가하며 1차 공진 주파수가 증가함에 따라 특히 고주파 대역에서 임피던스특성이 개선됨을 알 수 있다. 본 논문에서 제안한 기생 커패시턴스 저감형 Hybrid 초크 코일은 향후 LED-TV SMPS를 포함한 LED 조명, Note-PC Adapter 등과 같은 다양한 분야에 응용되리라 사료된다.