• 제목/요약/키워드: low-viscosity flowable resin

검색결과 5건 처리시간 0.029초

Effect of flowable resin composite on bond strength to wedge shaped cavity walls.

  • Ogata, M.;Pereira, PNR.;Harada, N.;Nakajima, M.;Nikaida, T.;Tagami, J.
    • 대한치과보존학회:학술대회논문집
    • /
    • 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
    • /
    • pp.558.1-558
    • /
    • 2001
  • Flowable resin composite is a relatively new restorative material. It has been reported that a low viscosity, low modulus intermediate resin applied between the bonding agent and restorative resin act as an "elastic buffer" that can relieve contraction stress. This in-vitro study aimed to evaluate the effect of flowable composite resin as a restorative material on regional tensile bond stredgth to cervical wedge shaped cavity walls. (omitted)

  • PDF

자가 중합 복합 레진과 두 단계 산 부식 접착제의 친화성에 대한 중간 접착제와 흐름성 레진의 효과 (EFFECT OF AN INTERMEDIATE BONDING RESIN AND FLOWABLE RESIN ON THE COMPATIBILITY OF TWO-STEP TOTAL ETCHING ADHESIVES WITH A SELF-CURING COMPOSITE RESIN)

  • 최속경;염지완;김현철;허복;박정길
    • Restorative Dentistry and Endodontics
    • /
    • 제34권5호
    • /
    • pp.397-405
    • /
    • 2009
  • 이 연구의 목적은 자가 중합복합 레진과 두 단계 산 부식 접착제의 친화성에 대한 중간 접착제와흐름성 레진의 효과를 미세 인장 결합 강도를 통해 비교하는 것이었다. 20개의 발거된 대구치를 사용해 접착제와 부가적인 적용(활성제, 중간 접착제, 흐름성 레진)에 따라 XP bond 그룹 (XA, XB, XF 그룹), Prime & Bond NT 그룹 (NA, NB, NF 그룹), Optibond solo plus 그룹 (OA, OB OX 그룹)으로 나누었다. 접착제 적용 후 활성제, 중간 접착제, 흐름성 레진을 각각 적용하고 상부에 자가 중합 레진을 축성하였다. 24시간 동안 실온의 증류수에 보관 후 각 그룹당 10개의 시편을 준비하였다. 모든 시편의 미세인장 결합 강도를 측정하여 다음과 같은 결과를 얻었다. 1. 모든 그룹에서 중간 접착제와 흐름성 레진의 적용은 활성제 적용보다 더 높은 결합 강도를 보였다. 2. 선택된 방법에 관계없이, Optibond solo plus 그룹은 가장 낮은 미세인장 결합강도를 보였다. 3. 파절 양상은 대부분 접착성 파절을 보였고 일부 레진 내에서 응집성 파절을 보였다. 이번 연구의 결과로부터, 중간 접착제와 흐름성 레진의 적용이 낮은 pH를 가지는 두 단계 산 부식 접착제와 자가 중합복합 레진의 상아질 접착에 더 효과적이라 예상된다.

5급 와동에서 저유동성과 고유동성 레진의 변연 미세누출 비교 (COMPARISON OF MARGINAL MICROLEAKAGE BETWEEN LOW AND HIGH FLOWABLE RESINS IN CLASS V CAVITY)

  • 배상배;조영곤;이명선
    • Restorative Dentistry and Endodontics
    • /
    • 제34권6호
    • /
    • pp.477-483
    • /
    • 2009
  • 이 연구는 1단계 자가부식 접착제와 저유동성 및 고유동성 레진을 이용한 5급 와동 수복물에서 법랑질과 상아질 변연의 미세 누출 차이를 상호 비교하기 위하여 시행하였다. 40개의 대구치의 협, 설면 치경부에 5급 와동을 형성하고, 8개씩 무작위로 선택하여 사용된 유동성 레진에 따라 5개의 군으로 분류하여 각 군의 와동을 유동성 레진으로 충전하였다 (대조군: Filtek Z 350, M-LF 군: Metafil Flo $\alpha$, U-LF 군: Unifil LoFlo Plus, M-HF군: Metafil Flo, U-HF군: Unifil Flow). 각 군의 치아를 2% methylene blue용액에 24시간 동안 침적시킨 다음, 협면과 설면의 5급 수복물의 중앙부가 통과되도록 절단하였다. 각 군의 절단 시편에서 유동성 레진 수복물의 법랑질과 상아질 변연부를 광학 입체현미경 하에서 색소침투 정도를 관찰하여 미세누출 점수를 평가하였다. 본 연구의 결과, 1단계 자가부식 접착제와 유동성 레진을 이용하여 5급 와동을 충전한 경우, 고유동성 레진보다 저유동성 레진이 낮은 변연 미세누출을 나타내어 5급 와동에서 저유동성 레진의 사용이 추천된다.

저점도 및 고점도 Bulk-fill Giomer 복합레진과 Bulk-fill 복합레진의 전환율과 중합수축 (Degree of Conversion and Polymerization Shrinkage of Low and High Viscosity Bulk-Fill Giomer-based and Resin-based composites)

  • 김희라;이제식;김현정;권태엽;남순현
    • 대한소아치과학회지
    • /
    • 제46권1호
    • /
    • pp.1-9
    • /
    • 2019
  • 이번 연구에서는 저점도 및 고점도 bulk-fill giomer 복합레진의 전환율과 중합수축을 기존 bulk-fill 복합레진 및 전통적 복합레진과 비교 평가해보고자 하였다. Bulk-fill giomer 복합레진 2종류(Beautifil Bulk Restorative(BBR), Beautifil Bulk Flowable(BBF)), bulk-fill 복합레진 2종류(Tetric N-Ceram Bulk-fill(TBF), SureFil SDR flow(SDR)), 전통적 복합레진 2종류(Tetric N-Ceram(TN), Tetric N-flow(TF))를 사용하였다. 중합도 측정은 Fourier transform infrared spectroscopy을 사용하였으며, 중합수축은 linometer을 이용하여 측정하였다. 복합레진 하면의 전환율 측정 결과 2 mm와 4 mm 깊이 모두 BBR에서 가장 낮게 나왔으며, SDR에서 가장 높게 나왔다. 4 mm 깊이에서 고점도 및 저점도 bulk-fill giomer 복합레진의 전환율은 bulk-fill 복합레진에 비해 유의하게 낮은 값을 보였다(p < 0.05). 깊이에 따른 전환율 비교 시 TBF, TN, TF는 유의차를 보였으며(p < 0.05), BBR, BBF, SDR는 유의차를 보이지 않았다. 중합수축은 TF > SDR > BBF > TBF > TN, BBR 순서로 감소 했으며(p < 0.05), bulk-fill giomer 복합레진은 bulk-fill 복합레진보다 낮은 중합수축량을 보였다(p < 0.05). 이번 연구 결과 4 mm 깊이에서 bulk-fill giomer 복합레진 및 TBF는 불충분한 중합을 나타냈으며, 2 mm와 4 mm 모두에서 고점도 및 저점도 bulk-fill giomer 복합레진은 bulk-fill 복합레진에 비해 낮은 전환율을 보였다. 그러므로 bulk-fill giomer 복합레진의 임상적인 적용을 위해서는 이에 대한 충분한 고찰 및 주의가 필요할 것으로 생각된다.

Flowable 및 microfill 복합레진으로 충전된 제 5급와동에서 load cycling 전,후의 미세변연누출 비교 (MICROLEAKAGE OF MICROFILL AND FLOWABLE COMPOSITE RESINS IN CLASS V CAVITY AFTER LOAD CYCLING)

  • 강석호;김오영;오명환;조병훈;엄정문;권혁춘;손호현
    • Restorative Dentistry and Endodontics
    • /
    • 제27권2호
    • /
    • pp.142-149
    • /
    • 2002
  • Low-viscosity composite resins may produce better sealed margins than stiffer compositions (KempScholte and Davidson, 1988: Crim, 1989). Plowable composites have been recommended for use in Class V cavities but it is also controversial because of its high rates of shrinkage. On the other hand, in the study comparing elastic moduli and leakage, the microfill had the least leakage (Rundle et at. 1997) Furthermore, in the 1996 survey of the Reality Editorial Team, microfills were the clear choice for abfraction lesions. The purpose of this study was to evaluate the microleakage of 6 compostite resins (2 hybrids, 2 microfills, and 2 flowable composites) with and without load cycling. Notch-shaped Class V cavities were prepared on buccal surface of 180 extracted human upper premolars on cementum margin. The teeth were randomly divided into non-load cycling group (group 1) and load cycling group (group 2) of 90 teeth each. The experimental teeth of each group were randomly divided into 6 subgroups of 15 samples. All preparations were etched, and Single bond was applied. Preparations were restored with the following materials (n=15) : hybrid composite resin [Z250(3M Dental Products Inc. St. Paul, USA), Denfil(Vericom, Ahnyang, Korea)], microfill [Heliomolar RO(Vivadent, Schaan, Liechtenstein), Micronew(Bisco Inc. Schaumburg, IL, USA)], and flowable composite[AeliteFlo(Bisco Inc. Schaumburg, IL, USA), Revolution(Kerr Corp. Orange, CA, USA)]. Teeth of group 2 were subjected to occlusal load (100N for 50,000 cycles) using chewing simulator(MTS 858 Mini Bionix II system, MTS Systems Corp. Minn. USA). All samples were coated with nail polish 1mm short of the restoration, placed in 2% methylene blue for 24 hours, and sectioned with a diamond wheel. Enamel and dentin/cementum margins were analyzed for microleakage on a sclale of 0 (no leakage) to 3 (3/3 of wall). Results were statistically analyzed by Kruscal-Wallis One way analysis, Mann-Whitney U-test, and Student-Newmann-Keuls method. (p = 0.05) Results : 1. There was significantly less microleage in enamel margins than dentinal margins of all groups (p<0.05) 2. There was no significant between six composite resin in enamel margin of group 1. 3. In dentin margin of group 1, flowable composite had more microleakage than others but not of significant differences. 4. there was no significant difference between six composite resin in enamel margin of group 2. 5. In dentin margin of group 2, the microleakage were R>A =H=M>D>Z. But there was no significant differences. 6. In enamel margins, load cycling did not affect the marginal microleakage in significant degree. 7. In enamel margins, load cycling did affect the marginal microleakage only in Revolution. (p<0.05).