Browse > Article
http://dx.doi.org/10.5395/JKACD.2009.34.5.397

EFFECT OF AN INTERMEDIATE BONDING RESIN AND FLOWABLE RESIN ON THE COMPATIBILITY OF TWO-STEP TOTAL ETCHING ADHESIVES WITH A SELF-CURING COMPOSITE RESIN  

Choi, Sook-Kyung (Department of Conservative Dentistry, School of Dentistry, Pusan National University)
Yum, Ji-Wan (Department of Conservative Dentistry, School of Dentistry, Pusan National University)
Kim, Hyeon-Cheol (Department of Conservative Dentistry, School of Dentistry, Pusan National University)
Hur, Bock (Department of Conservative Dentistry, School of Dentistry, Pusan National University)
Park, Jeong-Kil (Department of Conservative Dentistry, School of Dentistry, Pusan National University)
Publication Information
Restorative Dentistry and Endodontics / v.34, no.5, 2009 , pp. 397-405 More about this Journal
Abstract
This study compared the effect of an activator, intermediate bonding resin and low-viscosity flowable resin on the microtensile bond strength of a self-curing composite resin used with two-step total etching adhesives. Twenty extracted permanent molars were used. The teeth were assigned randomly to nine groups (n=10) according to the adhesive system and application of additional methods (activator, intermediate adhesive, flowable resin). The bonding agents and additional applications of each group were applied to the dentin surfaces. Self-curing composite resin buildups were made for each tooth to form a core, 5mm in height. The restored teeth were then stored in distilled water at room temperature for 24h before sectioning. The microtensile bond strength of all specimens was examined. The data was analyzed statistically by one-way ANOVA and a Scheffe's test. The application of an intermediate bonding resin (Optibond FL adhesive) and low-viscosity flowable resin (Tetric N-flow) produced higher bond strength than that with the activator in all groups. Regardless of the method selected, Optibond solo plus produced the lowest ${\mu}TBS$ to dentin. The failure modes of the tested dentin bonding agents were mostly adhesive failure but there were some cases showed cohesive failure in the resin.
Keywords
activator; intermediate bonding resin; low-viscosity flowable resin; self cure composite resin; microtensile bond strength;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Tay FR, Gwinnett JA, Wei SH. Micromorphological spectrum from overdrying to overwetting acid-conditioned dentin in water-free acetone-based, single-bottle primer/adhesives. Dent Mater 12(4):236-44, 1996   DOI   ScienceOn
2 Giannini M, De Goes MF, Nikaido T, Shimada Y, Tagami J. Influence of activation mode of dual-cured resin composite cores and low-viscosity composite liners on bond strength to dentin treated with self-etching adhesives. J Adhes Dent 6(4):301-306, 2004   PUBMED
3 Jayasooriya PR, Pereira PN, Nikaido T, Burrow MF, Tagami J. The effect of a 'resin coating'on the interfacial adaptation of composite inlays. Oper Dent 28(1):28-35, 2003   PUBMED
4 Leevailoj C, Cochran MA, Matis BA, Moore BK, Platt JA. Microleakage of posterior packable resin composites with and without flowable liners. Oper Dent 26(3):302-307, 2001   PUBMED
5 Imai Y, Kadoma Y, Kojima K, Akimoto T, Ikakura K, Ohta T. Importance of polymerization initiator systems and interfacial initiation of polymerization in adhesive bonding of resin to dentin. J Dent Res 70(7):1088- 1091, 1991   DOI   PUBMED   ScienceOn
6 Abate PF, Rodriguez VI, Macchi RL. Evaporation of solvent in one-bottle adhesives. J Dent 28(6):437-440, 2000   DOI   ScienceOn
7 Cho YG, Yoo SH. Comparative enamel bond strength between light-and dual-cured composites bonded by self-etching adhesives. J Kor Acad Cons Dent 32(1):1- 7, 2007   DOI
8 Powers CM, Lee IY, Skinner HB, Keyak JH. Effects of distal cement voids on cement stress in total hip arthroplasty. J Arthroplasty 13(7):793-798, 1998   DOI   ScienceOn
9 Jacobsen T, Soderholm KJ. Effect of primer solvent, primer agitation, and dentin dryness on shear bond strength to dentin. Am J Dent 11(5):225-228, 1998   PUBMED
10 Tay FR, Pashley DH, Yiu CK, Sanares AM, Wei SH. Factors contributing to the incompatibility between simplified-step adhesives and chemically-cured or dual-cured composites. Part I. Single-step self-etching adhesive. J Adhes Dent 5(1):27-40, 2003   PUBMED
11 Beznos C. Microleakage at the cervical margin of composite Class II cavities with different restorative techniques. Oper Dent 26(1):60-69, 2001   PUBMED
12 Sanares AM, Itthagarun A, King NM, Tay FR, Pashely DH. Adverse surface interactions between one-bottle light-cured adhesives and chemical-cured composites. Dent Mater 17(6):542-556, 2001   DOI   ScienceOn
13 Jacobsen T, So ¨derholm KJ. Some effects of water on dentin bonding. Dent Mater 11(2):132-136, 1995.   DOI   ScienceOn
14 Jayasooriya PR, Pereira PN, Nikaido T, Tagami J. Efficacy of a resin coating on bond strengths of resin cement to dentin. J Esthet Restor Dent 15(2):105- 113, 2003   DOI   PUBMED   ScienceOn
15 Tay FR, King NM, Suh BI, Pashley DH. Effect of delayed activation of light-cured resin composites on bonding of all-in-one adhesives. J Adhes Dent 3(3):207-225, 2001   PUBMED
16 Kanca J 3rd. Effect of resin primer solvents and surface wetness on resin composite bond strength to dentin. Am J Dent 5(4):213-215, 1992   PUBMED
17 Giannini M, Arrais CA, Vermelho PM, Reis RS, dos Santos LP, Leite ER. Effects of the solvent evaporation technique on the degree of conversion of one-bottle adhesive systems. Oper Dent 33(2):149-154, 2008   DOI   ScienceOn
18 Swift EJ Jr. Dentin bonding, caries control. J Esthet Dent 12(5):236-237, 2000   DOI   PUBMED
19 Montes MA, de Goes MF, da Cunha MR, Soares AB. A morphological and tensile bond strength evaluation of an unfilled adhesive with low-viscosity composites and a filled adhesive in one and two coats. J Dent 29(6): 435-441, 2001   DOI   ScienceOn
20 Mak YF, Lai SC, Cheung GS, Chan AW, Tay FR, Pashley DH. Micro-tensile bond testing of resin cements to dentin and an indirect resin composite. Dent Mater 18(8):609-621, 2002   DOI   ScienceOn
21 Figueiredo Reis A, Giannini M, Ambrosano GM, Chan DC. The effects of filling techniques and a low-viscosity composite liner on bond strength to class II cavities. J Dent 31(1):59-66, 2003   DOI   ScienceOn
22 Tay FR, Suh BI, Pashley DH, Prati C, Chuang SF, Li F. Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive. J Adhes Dent 5(2):91-105, 2003   PUBMED
23 Belli S, Inokoshi S, Ozer F, Pereira PN, Ogata M, Tagami J. The effect of additional enamel etching and a flowable composite to the interfacial integrity of Class II adhesive composite restorations. Oper Dent 26(1):70-75, 2001   PUBMED
24 Franco EB, Lopes LG, D'Alpino PH, Pereira JC. Influence of pH of different adhesive systems on the polymerization of a chemically cured composite resin. Braz Dent J 16(2):107-111, 2005   DOI   PUBMED
25 Castellon P, Burgess JO. Shear bond strength of four core materials to dentin bonded with light-cured or dual-cured adhesive. Am J Dent 17(6):401-403, 2004
26 Nikaido T, Podszun W, Mu¨ller M, Nakabayashi N. Effect of sulfonamides and 4-MET on adhesion to tooth substrates. Dent Mater 6(2):78-82, 1990.   DOI   ScienceOn
27 Ko KH, Cho YG, Jin CH, Yoo SH. Effect of wetness on the enamel bonding. J Kor Acad Cons Dent 29(3):205- 211, 2004   DOI
28 Jung MK, Cho BH, Son HH, Um CM, Han YC, Choung SJ. Effect of additional coating of bonding resin on the microtensile bond strength of self-etching adhesives to dentin. J Kor Acad Cons Dent 31(2):103-111, 2006   DOI
29 Behle C. Flowable composites: properties and applications. Pract Periodontics Aesthet Dent 10(3):347,350- 351, 1998   PUBMED
30 Swift EJ Jr, Perdigao J, Combe EC, Simpson CH 3rd,Nunes MF. Effects of restorative and adhesive curing methods on dentin bond strengths. Am J Dent 14(3):137-140, 2001   PUBMED
31 Nyunt MM, Imai Y. Adhesion to dentin with resin using sulfinic acid initiator system. Dent Mater J 15(2):175-182, 1996   DOI   PUBMED   ScienceOn
32 Munksgaard EC, Irie M, Asmussen E. Dentin-polymer bond promoted by Gluma and various resins. J Dent Res 64(12):1409-1411, 1985   DOI   PUBMED   ScienceOn