• 전자공학회논문지A
• /
• 제33A권10호
• /
• pp.160-167
• /
• 1996

A new pathlength deviation detection technique which is composed of michelson interferometer is described and verified experimentally. The technique uses a sub-threshold biased visible laser diode of 20$\mu$m coherence length as a low-coherent light source. And for zeroth-order fringe(which is the largest among fringes) identification we used a piezoelectric transducer with a large modulation smplitude, which enables without the need of constant velocity scanning, to distinguish reflection surfaces separated by more than 10$\mu$m with a resolution of less than half-wavelength.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.286-288
• /
• 2007

In this paper, the fast locking PLL Frequency Synthesizer with low phase noise in a 0.18um CMOS process is presented. Its main application IS for the 915MHz ISM band wireless transponder upon the CPFSK (Continuous Phase Frequency Shift Keying) modulation scheme. Frequency synthesizer, which in this paper, is designed based on self-biased techniques and is independent with processing technology when damping factor and bandwidth fixed to most important parameters as operating frequency ratio, broad frequency range, and input phase offset cancellation. The proposed frequecy synthesizer, which is fully-integrated and is in 320M $^{\sim}$ 960MHz of the frequency range with 10MHz of frequency resolution. And its is implemented based on integer-N architecture. Its power consumption is 50mW at 1.8V of supply voltage and core area is $540{\mu}m$ ${\times}$ $450{\mu}m$. The measured phase noises are -117.92dBc/Hz at 10MHz offset, with low settling time less than $3.3{\mu}s$.

• 전기전자학회논문지
• /
• 제13권4호
• /
• pp.103-109
• /
• 2009

본 논문에서는 마하-젠더 광 변조기와 EDFA(Erbium-Doped Fiber Amplifier)로 구성된 아날로그 광통신 링크에서 광 변조기에 인가되는 바이어스 전압의 조정을 통해 광통신 링크 출력의 랜덤 지터를 효과적으로 감소시키는 방법에 관하여 연구하였다. 광 변조기의 바이어스를 $0.5\;V_{\pi}$로부터 약 $0.089\;V_{\pi}$로 이동시켰을 때, 10 GHz RF 신호의 이득은 최대 10.65 dB가 증가하였고, 랜덤 지터는 EDFA의 입력 광 파워가 -0.11 dBm일 때 최대 46.5% 감소하였다.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1217-1226
• /
• 2015

In a grid-connected photovoltaic (PV) system, the traditional Z-source inverter uses a low frequency transformer to ensure galvanic isolation between the grid and the PV system. In order to combine the advantages of both Z-source inverters and transformerless PV inverters, this paper presents a modified single-phase transformerless Z-source PV grid-connected inverter and a corresponding PWM strategy to eliminate the ground leakage current. By utilizing two reversed-biased diodes, the path for the leakage current is blocked during the shoot-through state. Meanwhile, by turning off an additional switch, the PV array is decoupled from the grid during the freewheeling state. In this paper, the operation principle, PWM strategy and common-mode (CM) characteristic of the modified transformerless Z-source inverter are illustrated. Furthermore, the influence of the junction capacitances of the power switches is analyzed in detail. The total losses of the main electrical components are evaluated and compared. Finally, a theoretical analysis is presented and corroborated by experimental results from a 1-kW laboratory prototype.

• Progress in Superconductivity
• /
• 제5권1호
• /
• pp.55-60
• /
• 2003

We designed and constructed integrated 3-channel flux-locked-loop (FLL) electronic system for the control and readout of high-T$_{c}$ SQUIDs. This system consists of low noise preamplifiers, integrators, interface circuits, and software. FLL operation was carried out with biased signals of 19 KHz modulated current and 150 KHz modulated flux, which are reconstructed as detected signals by preamplifier and demodulator. Computer controlled interface circuits regulate FLL circuit and adjust SQUID parameters to the optimum operating condition. The software regulates interface circuits to make an auto-tuning for the control of SQUIDs, and displays readout data from FLL circuit. 3-channel SQUID electronic system was assembled with 3 FLL-interface circuit boards and a power supply board in the aluminum case of 56 mm ${\times}$ 53 mm${\times}$ 150 mm. Overall noise of the system was around 150 fT/(equation omitted)Hz when measured in the shielded room, 200 fT/(equation omitted)Hz in a weakly shielded room, respectively.y.

• 한국정보통신학회논문지
• /
• 제21권2호
• /
• pp.345-352
• /
• 2017

본 논문에서는 전원전압 1V에서 동작하는 산소 및 과산화수소 기반의 혈당전류를 측정할 수 있는 통합형 정전압분극장치를 설계하고 제작하였다. 정전압분극장치는 저전압 OTA, 캐스코드 전류거울 그리고 모드 선택회로로 구성되어 있다. 정전압분극장치는 산소 및 과산화수소 기반에서 혈당의 화학반응으로 발생하는 전류를 측정할 수 있다. OTA의 PMOS 차동 입력단의 바디에는 순방향전압을 인가하여 문턱전압을 낮추어 낮은 전원전압이 가능하도록 하였다. 또한 채널길이변조효과로 인한 전류의 오차를 줄이기 위해 캐스코드 전류거울이 사용되었다. 제안한 저전압 정전압분극장치는 Cadence SPECTRE를 이용하여 설계하였으며, 매그나칩 $0.18{\mu}m$ CMOS 공정을 이용하여 제작되었으며 회로의 크기는 $110{\mu}m{\times}60{\mu}m$이다. 전원전압 1.0V에서 소모전류는 최대 $46{\mu}A$이다. 페리시안화칼륨($K_3Fe(CN)_6$)을 사용하여 제작된 정전압분극장치의 성능을 확인하였다.