• Food Science of Animal Resources
• /
• v.34 no.2
• /
• pp.230-237
• /
• 2014

This study was designed to find the most suitable method and wall material for microencapsulation of the Lactobacillus plantarum to maintain cell viability in different environmental conditions. To improve the stability of L. plantarum, we developed an encapsulation system of L. plantarum, using water-in-oil emulsion system. For the encapsulation of L. plantarum, corn starch and glyceryl monostearate were selected to form gel beads. Then 10% (w/v) of starch was gelatinized by autoclaving to transit gel state, and cooled down at $60^{\circ}C$ and mixed with L. plantarum to encapsulate it. The encapsulated L. plantarum was tested for the tolerance of acidic conditions at different temperatures to investigate the encapsulation ability. The study indicated that the survival rate of the microencapsulated cells in starch matrix was significantly higher than that of free cells in low pH conditions with relatively higher temperature. The results showed that corn starch as a wall material and glycerol monostearate as a gelling agent in encapsulation could play a role in the viability of lactic acid bacteria in extreme conditions. Using the current study, it would be possible to formulate a new water-in-oil system as applied in the protection of L. plantarum from the gastric conditions for the encapsulation system used in chicken feed industry.

• Nano
• /
• v.13 no.12
• /
• pp.1850147.1-1850147.14
• /
• 2018

In this work, water-soluble and blue-emitting carbon nanodots (CDs) were synthesized from apple peels for the first time via one-step hydrothermal method. The synthetic route is facile, green, economical and viable. The as-prepared CDs were characterized thoroughly by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman, Fourier transform infrared (FT-IR), X-ray photoelectron (XPS), fluorescence and UV-Vis absorption spectroscopy in terms of their morphology, surface functional groups and optical properties. The results show that these CDs possessed ultrasmall size, good dispersivity, and high tolerance to pH, ionic strength and continuous UV irradiation. Significantly, the CDs had fast and reversible response towards temperature, and the accurate linear relationship between fluorescence intensity and temperature was used to design a novel nanothermometer in a broad temperature range from 5 to $65^{\circ}C$ facilely. In addition, the fluorescence intensity of CDs was observed to be quenched immediately by Cr(VI) ions based on the inner filter effect. A low-cost Cr(VI) ions sensor was proposed employing CDs as fluorescent probe, and it displayed a wide linear range from 0.5 to $200{\mu}M$ with a detection limit of $0.73{\mu}M$. The practicability of the developed Cr(VI) sensor for real water sample assay was also validated with satisfactory recoveries.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.132-132
• /
• 2022

The application of direct seeding cultivation reduces time, labor, and cost. However, this application often has poor seedling establishment and leads to lower yield as compared to transplanting system. The tolerance to anaerobic and low temperature germination is important to improve seedling establishment and the wide-spread application of direct seeding method. This study was carried out to evaluate the responses of three japonica cultivars to different temperatures (15℃, 18℃, 21℃, 24℃, and 27℃) and different flooding levels (1 cm, 4 cm, 7 cm, 10 cm) during germination and seedling development. The mean survival percentage significantly increased (P<0.05) when the flooding level decreased and when temperature increased. There were significant effects of the interaction between temperature and water depth on survival percentage and seedling height. When temperature decreased from 27℃ to 15℃, the germination duration significantly increased from 6.4 days to 16.3 days while the germination speed, survival percentage, and seedling height decreased from 5.3 seeds day^-1, 61.9% and 190.6 cm to 2.2 seeds day^-1, 33.2%, and 47 cm, respectively. The increase in temperature under submergence condition was associated with the increased expression of Amy3D and ALDH2a but the decreased expression of ADH1 and PDC1. The results of this research would be used for further studies and breeding programs to improve rice seedling establishment and the application of direct seeding cultivation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.146-153
• /
• 2009

This study was conducted to examine the effects of fruits and stems of Opuntia ficus-indica var. saboten Makino on water intake, feed intake, body weight, blood glucose level and glucose tolerance in streptozotocin (STZ)-induced diabetic rats. Forty Sprague-Dawley male rats were divided into non-diabetic control (NC), diabetic control (DC), 8% Opuntia fruit (DOF), 5% Opuntia stem (DO-5) and 10% Opuntia stem (DO-10) groups. Fruits and stems of Opuntia ficus-indica were freeze-dried and ground before use in the experiment. Animals were fed experimental diet for 3 weeks. DOF, DO-5 and DO-10 groups showed lower water and feed intake as well as less body weight loss than DC group. The fasting blood glucose levels were 100 mg/dL for NC and 379 mg/dL for DC. Fasting glucose level of DOF was a significantly low level of 28% (p<0.05), whereas DO-5 and DO-10 had a decrease of 5% and 9% compared to DC. As for the glucose tolerance test, the highest blood glucose levels for NC and DC-10 group were observed at 30 minutes after glucose injection while those of DOF and DO-5 groups were after 60 minutes. DOF and DO-5 plasma insulin level improved. Plasma total cholesterol, triglyceride, non-esterified fatty acid (NEFA) and LDL-cholesterol concentrations were also lower in DOF, DO-5 and DO-10 groups, although HDL-cholesterol level was only slightly affected by experimental diets compared to DC. These results suggest that the feeding of Opuntia ficus-indica fruits and stems improved blood glucose and lipid metabolism in STZ-induced diabetic rats.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.1
• /
• pp.48-56
• /
• 2009

This study was conducted to examine the effects of Opuntia ficus-indica complexes(OCB) on the intake of water and food, body weight, blood glucose levels, glucose tolerance and lipid metabolism in streptozotocin(STZ)-induced diabetic rats. Thirty-two male Sprague-Dawley rats were assigned to four different groups; non-diabetic control(NC), diabetic control (DC), diabetic OCB of 2%(OCB-2), and diabetic OCB of 5%(OCB-5). The animals were fed on each experimental diet for 3 weeks. The DC, OCB-2 and OCB-5 groups showed a higher intake of water and food than the NC group. The fasting blood glucose levels were 100 $ mg/d{\ell}$ and 416 $ mg/d{\ell}$ for the NC and DC groups, respectively. The OCB-5 group presented a significantly low fasting glucose level of 21%(P<0.05), while OCB-2 group had a decrease of 13% compared to the DC group. As for the results of the glucose tolerance test, the highest blood glucose level was observed for all the groups at 30 minutes after the glucose injections as well as higher plasma insulin levels in the OCB-5 group. Plasma total cholesterol, triglyceride, non-esterified fatty acids(NEFA) and LDL-cholesterol concentrations were also lower in the OCB-2 and OCB-5 groups. The experimental diet did not affect the HDL-cholesterol levels. The overall results suggest that the higher intake of food by the OCB-2 and OCB-5 groups improved the blood glucose levels and lipid metabolism in STZ-induced diabetic rats.

• Journal of Ginseng Research
• /
• v.27 no.2
• /
• pp.56-61
• /
• 2003

This study was designed to compare the antidiabetic activities between Ginseng Radix Alba (GRA), Ginseng Radix Rubra (GRR) and Panax Quinquefoli Radix (PQR) in multiple low dose (MLD) streptozotocin (STZ) (20 mg/kg i.p injection far 5 days) induced diabetic rats. In the glucose tolerance test, 500 mg/kg of each ginseng ethanol extract was administered intraperitoneally 30 min before glucose challenge. While GRA failed to lower blood glucose level, GRR and PQR both significantly prevented the hyperglycemia when compared with the control group. In the MLD STZ-induced diabetic rats, 300 mg/kg of each ginseng ethanol extract was administered intraperitoneally for 2 weeks. Plasma glucose and insulin levels were markedly improved in all treatment groups. While GRR showed the highest antidiabetic activity, and GRA and PQR revealed somewhat equipotent antidiabetic activities, but less than that in GRR-treated group as far as blood parameters and diabetic symptoms such as polyphagia and polydipsia are concerned. Blood glucose levels were closely associated with plasma insulin levels, and this result may suggest that ginseng ethanol extracts showed the activity to enhance insulin secretion as well as preventing destruction of pancreatic islet cells. To elucidate the relationship between antidiabetic activity and ginsenoside profiles, seven major ginsenosides were quantified by HPLC. We figured out the fact that protopanaxatriol (PPT): proptopanaxadiol (PPD) ratio might play an important role in its hypoglycemia effects.

• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.309-316
• /
• 2008

Effects of the various dietary additives on growth and tolerance of abalone Haliotis discus hannai to the stresses were determined in the 16-week feeding trial. Seventy juvenile (an initial body weight of 4.2 g) abalone per container were randomly distributed into 21, 50 L plastic rectangular containers each. The six kinds of experimental diets were prepared: control (CON) with no additive, by-product of green tea (BPG), extract of figs (EF), extract of green tea (EG), commercially available product of Hearok (PH), and Haematococcus (HC). In addition, dry sea tangle (ST) was prepared to compare the efficiency of the experimental diets. Fishmeal, soybean meal and shrimp head meal were used as the protein source, and dextrin, sea tangle powder and wheat flour, and soybean oil and fish oil were used as the carbohydrate and lipid sources, respectively in the experimental diets. The experimental diets were fed to abalone once a day at a satiation level with a little leftover. The feeding trial lasted for 16 weeks. At the end of the 16-week feeding trial, abalone was exposed to the different types of stresses (air exposure, and sudden changes of rearing temperature and salinity). Survival of abalone fed the sea tangle was highest. However, weight gain of abalone fed the EF, EG and PH diets was significantly (P<0.05) higher than that of abalone fed the BPG diet or dry sea tangle. Shell length of abalone fed the all experimental diets was significantly (P<0.05) higher than that of abalone fed the dry sea tangle. Accumulated mortality of abalone fed the sea tangle was low when exposed to the different types of stresses. Also, relatively low mortality was achieved in abalone fed the HC and EF diets. In considering these results, it can be concluded that the various sources of additives is effective to improve production of abalone, and Haematococcus and extract of figs can be considered as dietary additives to improve resistance of abalone against the different types of stresses.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.2
• /
• pp.142-148
• /
• 1997

This study was performed to develop the biological treatment technology of wastewater polluted with heavy metals. Heavy metal-tolerant microorganisms, such as Pseudomonas putida, P. aeruginosa, P. chlororaphis and P. stutzeri possessing the ability to accumulate cadmium, lead, zinc and copper, respectively, were isolated from industrial wastewaters and mine wastewaters polluted with various heavy metals. The effect of competing ions and metabolic inhibitors on heavy metal accumulation in the cells was investigated. Heavy metal accumulation into cells was drastically decreased in the presence of competing cation, $Al^{3+}$, and also decreased, at a lesser extent, in the presence of competing anions, $CO_3\;^{2-}$ and $PO_4\;^{2-}$. But heavy metal accumulation was not influenced generally in the presence of the other rations and anions. The accumulation of Cd, Zn or Cu by Cd-, Zn- or Cu-tolerant microorganism was remarkably decreased in the presence of metabolic inhibitors, but the accumulation of Pb by Pb-tolerant microorganism was little affected in the presence of metabolic inhibitors. These results suggested that the accumulation of Cd, Zn or Cu by Cd-, Zn- or Cu-tolerant microorganism was concerned with the biological activity depending on energy, and the accumulation of Pb by Pb-tolerant microorganism depended on not the biological activity but the physical adsorption on the cell surface. Each heavy metal-tolerant microorganism also exhibited some ability to accumulate the other heavy metals in solution containing equal concentrations of cadmium, lead, zinc and copper, when measured at 48 hours after inoculation of the microorganisms, but the accumulation rates were somewhat low as compared to the accumulation rates of heavy metal fitting to each tolerance. These results suggested that the accumulation of each heavy metal by each heavy metal-tolerant microorganism was a selective accumulation process.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.5
• /
• pp.597-604
• /
• 2014

$\small{D}$-Phenylglycine aminotransferase ($\small{D}$-PhgAT) from Pseudomonas stutzeri ST-201 is useful for enzymatic synthesis of enantiomerically pure $\small{D}$-phenylglycine. However, its low protein solubility prevents its application at high substrate concentration. With an aim to increase the protein solubility, the N-terminus of $\small{D}$-PhgAT was genetically fused with short peptides ($A_1$ ${\alpha}$-helix, $A_2$ ${\alpha}$-helix, and ALAL, which is a hybrid of $A_1$ and $A_2$) from a ferredoxin enzyme of a halophilic archaeon, Halobacterium salinarum. The fused enzymes $A_1$-$\small{D}$-PhgAT, $A_2$-$\small{D}$-PhgAT, and ALAL-$\small{D}$-PhgAT displayed a reduced pI and increased in solubility by 6.1-, 5.3-, and 8.1- fold in TEMP (pH 7.6) storage, respectively, and 5-, 4.5-, and 5.9-fold in CAPSO (pH 9.5) reaction buffers, respectively, compared with the wild-type enzyme (WT-$\small{D}$-PhgAT). In addition, all the fused $\small{D}$-PhgAT displayed higher enzymatic reaction rates than the WT-DPhgAT at all concentrations of L-glutamate monosodium salt used. The highest rate, $23.82{\pm}1.47$ mM/h, was that obtained from having ALAL-$\small{D}$-PhgAT reacted with 1,500 mM of the substrate. Moreover, the halophilic fusion significantly increased the tolerance of $\small{D}$-PhgAT in the presence of NaCl and KCl, being slightly in favor of KCl, where under the same condition at 3.5 M NaCl or KCl all halophilic-fused variants showed higher activity than WT-$\small{D}$-PhgAT.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.8
• /
• pp.461-465
• /
• 2016

n-type silicon shows the better tolerance towards metal impurities with a higher minority carrier lifetime compared to p-type silicon substrate. Due to better lifetime stability as compared to p-type during illumination made the photovoltaic community to switch toward n-type wafers for high efficiency silicon solar cells. We fabricated the front electrode of the n-type solar cell with AgAl paste. The electrodes characteristics of the AgAl paste depend on the contact junction depth that is closely related to the firing temperature. Metal contact depth with p+ emitter, with optimized depth is important as it influence the resistance. In this study, we optimize the firing condition for the effective formation of the metal depth by varying the firing condition. The firing was carried out at temperatures below $670^{\circ}C$ with low contact depth and high contact resistance. It was noted that the contact resistance was reduced with the increase of firing temperature. The contact resistance of $5.99m{\Omega}cm^2$ was shown for the optimum firing temperature of $865^{\circ}C$. Over $900^{\circ}C$, contact junction is bonded to the Si through the emitter, resulting the contact resistance to shunt. we obtained photovoltaic parameter such as fill factor of 76.68%, short-circuit current of $40.2mA/cm^2$, open-circuit voltage of 620 mV and convert efficiency of 19.11%.