• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.715-727
• /
• 2020

Volcanostratigraphy in Ulleung Island is divided into 4 stratigraphic groups: Dodong Basaltic Rocks, Ulleung Group, Seonginbong Group and NariGroup. The main pyroclastics in them includes lapilli tuff intercalated within the Dodong Basaltic Rocks, lapilli tuff at the top of Sadong Breccia, Sataegam Tuff, Gombawi Welded Tuff, Bongrae Scoria Deposits, Maljandeung Tuff, Nari Scoria Deposits and Jugam Scoria Deposits. Analysing eruption types, The lapilli tuff in the Dodong Basaltic Rocks is derived from Surtseyan eruption, and the Bongrae, Nari and Jugam Scoria Deposits are caused by Strombolian eruptions or/and sub-Plinion eruptions, but the Sataegam Tuff and Maljandeung Tuff are derived from Plinian and phreatoplinian eruptions. Among them the large-scaled eruptions. In particular, the eruptions of Maljandeung were large enough to result in caldera collapse, and had falled out tephras to the eastern Korean peninsula but even Japan Islands. The magma with high potential to be still alive is judged to be trachyandesitic and phonolitic in composition. If the trachyandesitic magma explodes, it will probably result in a strombolian eruption and have a fairly low explosivity, but if the phonolitic magma explodes, it will probably result in a plinian eruption and have a much higher explosivity. If the eruption had a high explosivity, there is a possibility that it could easily be converted into a phreatoplinian eruption due to the influx of groundwater by the easy generation of fractures. These large-scaled eruptions could fall out tephras to the eastern Korean peninsula but even Japan Islands.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.537-543
• /
• 2022

The purpose of this simulation study was to evaluate the possibility of pancreas detection through effective atomic number information using dual-energy computed tomography(CT). The effective atomic number of 10 tissue-equivalent materials were estimated through stoichiometric calibration. For stoichiometric calibration, HU values at low-energy (80 kV) and high-energy (140 kV) for 10 tissue-equivalent materials were used. Based on this method, the effective atomic number image of the tissue-equivalent material was extracted through an iterative algorithm. According to the results, the attenuation ratio in accordance with the effective atomic number was estimated to have an R² value of 0.9999, and the effective atomic number of Pancreas, Water, Liver, Blood, Spongiosa, and Cortical bone was overall within 1% accuracy compared to the theoretical value. Conventional pancreatic cancer examination uses a contrast medium, so there is a possibility of potential side effects of the contrast medium. In order to solve this problem, it is thought that it will be possible to contribute to an accurate and safe examination by extracting the effective atomic number using dual-energy CT without contrast enhancement. Based on this study, future research will be conducted on the detection of pancreatic cancer using the HU value of pancreatic cancer based on clinical images.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.641-649
• /
• 2006

The behavior of a three-dimensional pure rectangular water jet with aspect ratio of 10 was experimentally investigated based on the results of the mean velocity field obtained by PIV. The saddle back distribution was observed in the lateral distribution along the major axis. The theoretical centerline velocity equation derived from the point source concept using the spreading rate for the axisymmetric jet was in good agreement with the measured centerline velocity and gave the division of the potential core region, two-dimensional region, and axisymmetric region. The range of the two-dimensional region divided by the criterion of the theoretical centerline velocity decay for the aspect ratio of 10 was observed to be smaller than that of the transition region. The applicability of the two-dimensional model to the behavior of the rectangular jet with low aspect ratio or the wastewater discharged from a multiport diffuser in the deep water of real ocean may result in significant error in the transition and axisymmetric regions after the two-dimensional region. In the two-dimensional region, the Gaussian constant tended to be conserved, and the spreading rate slightly decreased at the end of the two-dimensional region. The normalized turbulent intensity along the centerline of the jet initially abruptly increased and showed relatively higher intensity for higher Reynolds number.

• Membrane Journal
• /
• v.34 no.2
• /
• pp.154-162
• /
• 2024

Anion exchange membranes (AEMs) are essential components in water electrolysis systems, serving to physically separate the generated hydrogen and oxygen gases while enabling the selective transport of hydroxide ions between electrodes. Key characteristics sought in AEMs include high ion conductivity and robust chemical and mechanical stability in alkaline. In this study, quaternized Poly(terphenyl piperidinium)/cellulose nanocrystals (qPTP/CNC) mixed matrix membrane was fabricated. The polymer matrix, PTP, was synthesized via super-acid polymerization, known for its excellent ion conductivity and alkaline durability. The qPTP/CNC membrane showed a dense and uniform morphology without significant voids or large aggregates at the polymer-nanoparticle interface. The qPTP/CNC membrane containing 2 wt% CNC demonstrated a high ion exchange capacity of 1.90 mmol/g, coupled with low water uptake (9.09%) and swelling ratio (5.56%). Additionally, the qPTP/CNC membrane showed significantly lower resistance and superior alkaline stability (384 hours at 50℃ in 1 M KOH) compared to the commercial FAA-3-50 membrane. These results highlight the potential of hydrophilic additive CNC in enhancing ion conductivity and alkaline durability of ion exchange membranes.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.40-47
• /
• 2014

Feasibility of utilizing unburned carbon residue in coal ash as a potential precursor for the production of activated carbon was assessed to seek for solution to recycle unburned carbon residue. The unburned carbon concentrate generated from the 4 stages of cleaner flotation has a grade of 87% carbon. The crystalline impurities in the concentrate included quartz and mullite. Unburned carbon had a low specific surface area of $10m^2/g$, which might be related to a high degree of coalification of domestic anthracite coal. Carbon particles were mostly porous and have a turbostratic structure. When 1g of carbon was activated with 6g of KOH powder, the highest specific surface area value of $670m^2/g$ was achieved. Low wettability of unburned carbon particles, which was resulted from high temperature combustion in a boiler, might cause poor pore formation when they were activated by KOH solution. The activated carbon produced in this study developed micropores, with an equivalent quality of general-purpose activated carbon made from coal. Hence, it is concluded that chemically treated unburned carbon can be used for water purification or an alternative to carbon black as it is.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.663-666
• /
• 2005

Gas hydrates are ice-like compounds that form at the low temperature and high pressure conditions common in shallow marine sediments at water depths greater than 300-500 m when concentrations of methane and other hydrocarbon gases exceed saturation. Estimates of the total mass of methane carbon that resides in this reservoir vary widely. While there is general agreement that gas hydrate is a significant component of the global near-surface carbon budget, there is considerable controversy about whether it has the potential to be a major source of fossil fuel in the future and whether periods of global climate change in the past can be attributed to destabilization of this reservoir. Also essentially unknown is the interaction between gas hydrate and the subsurface biosphere. ODP Leg 204 was designed to address these questions by determining the distribution, amount and rate of formation of gas hydrate within an accretionary ridge and adjacent basin and the sources of gas for forming hydrate. Additional objectives included identification of geologic proxies for past gas hydrate occurrence and calibration of remote sensing techniques to quantify the in situ amount of gas hydrate that can be used to improve estimates where no boreholes exist. Leg 204 also provided an opportunity to test several new techniques for sampling, preserving and measuring gas hydrates. During ODP Leg 204, nine sites were drilled and cored on southern Hydrate Ridge, a topographic high in the accretionary complex of the Cascadia subduction zone, located approximately 80km west of Newport, Oregon. Previous studies of southern Hydrate Ridge had documented the presence of seafloor gas vents, outcrops of massive gas hydrate, and a pinnacle' of authigenic carbonate near the summit. Deep-towed sidescan data show an approximately $300\times500m$ area of relatively high acoustic backscatter that indicates the extent of seafloor venting. Elsewhere on southern Hydrate Ridge, the seafloor is covered with low reflectivity sediment, but the presence of a regional bottom-simulating seismic reflection (BSR) suggests that gas hydrate is widespread. The sites that were drilled and cored during ODP Leg 204 can be grouped into three end-member environments basedon the seismic data. Sites 1244 through 1247 characterize the flanks of southern Hydrate Ridge. Sites 1248-1250 characterize the summit in the region of active seafloor venting. Sites 1251 and 1252 characterize the slope basin east of Hydrate Ridge, which is a region of rapid sedimentation, in contrast to the erosional environment of Hydrate Ridge. Site 1252 was located on the flank of a secondary anticline and is the only site where no BSR is observed.

• the MEAT Journal
• /
• s.34 winter
• /
• pp.26-39
• /
• 2007

This study investigated the effect of salt and glucono-$\delta$-lactone (GdL) on the cold-set binding of restructured pork washed and pressurized at 200 MPa. Binding strength, pH, water holding capacity (WHC) and color were determined. NaCl improved pH, WHC and binding strength. GdL also increased binding strength while decreased WHC and pH significantly (p<0.05). However, low GdL level combined with NaCl showed high pH and WHC, compared to control. In color, NaCl decreased L*-value with increasing a*-value significantly (p<0.05). In contrast to NaCl, GdL increased L*-value and decreased a*-value. GdL tended to decrease b*-value and significant differences were found when GdL was added above 1%. Pearson’s correlation coefficients presented that NaCl had a significant effect on binding strength (0.6632) and lightness (?0.7330) while GdL had a significant correlation with all parameters barring binding strength. The results indicated that under washing and pressure treatments, GdL had a potential effect on cold-set binding with reducing NaCl concentration, especially when low GdL concentration combined with NaCl was added.

• Food Science of Animal Resources
• /
• v.26 no.2
• /
• pp.204-211
• /
• 2006

This study investigated the effect of salt and glucono-${\delta}$-lactone (GdL) on the cold-set binding of restructured pork washed and pressurized at 200 MPa. Binding strength, PH, water holding capacity (WHC) and color were determined. NaCl improved pH, WHC and binding strength. GdL also increased binding strength while decreased WHC and pH significantly (p<0.05). However, low GdL level combined with NaCl showed high pH and WHC, compared to control. In color, NaCl decreased $L^*$-value with increasing $a^*$-value significantly (p<0.05). In contrast to NaCl, GdL increased $L^*$-value and decreased $a^*$-value. GdL tended to decrease $b^*$-value and significant differences were found when GdL was added above 1%. Pearson's correlation coefficients presented that NaCl had a significant effect on binding strength (0.6632) and lightness (-0.7330) while GdL had a significant correlation with all parameters barring binding strength. The results indicated that under washing and pressure treatments, GdL had a potential effect on cold-set binding with reducing NaCl concentration, especially when low GdL concentration combined with NaCl was added.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.4
• /
• pp.415-429
• /
• 2012

The monitoring methods for volcanic gases are divided into remote sensing and direct gas sampling approaches. In the remote sensing approach, COSPEC and Li-COR are used to measure $SO_2$ and $CO_2$, respectively, with FT-IR for detection of a range of volcanic gases. However, the remote sensing approach is not applicable to Mt. Baegdu, where the atmospheric contents of volcanic gases are very low as a result of the strong interaction of volcanic gases with the nearby surface water and groundwater. On the other hand, the direct gas sampling approach involves the collection of volcanic gases from volcanic vents or fumaroles and the subsequent laboratory analysis, thus making it possible to measure even very low levels of volcanic gases. The direct sampling approach can be subdivided into the evacuated bottle method and the flow-through bottle method. In applying both methods, sampling bottles typically contain reaction media to trap specific volcanic gases. For example, NaOH solution(Giggenbach bottle), $NH_4OH$ solution, and acid condensates have been experimented for volcanic gas sampling. Once taken from vents and fumaroles, the samples of volcanic gases are pretreated and subsequently analyzed for volcanic gases using GC, IC, HPLC, titrimetry, TOC-IC, or ICP-MS. Recently, there has been the increasing number of evidences on the potential volcanic activity of Mt. Baegdu. However, little technical development has been made for the sampling and analysis of volcanic gases in Korea. In the present work, we reviewed various volcanic gas monitoring methods, and provided the detailed information on the monitoring methods applied to Mt. Baegdu.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.441-452
• /
• 2011

This study was carried out to survey the residual characteristics of endocrine disruptor (ED)-suspected pesticides in greenhouse soils and assess their leachabilites to groundwater. Greenhouse soils were collected from 40 sites of greenhouse in 2008 in Korea. Sixteen ED-suspected pesticides which had been using in Korea, such as alachlor, benomyl, carbaryl, cypermethrin, 2,4-D, dicofol, endosulfan, fenvalerate, malathion, mancozeb, metribuzin, metiram, methomyl, parathion, trifluralin, and vinclozolin, in the soils, were analyzed by chromatographic methods using GLC-ECD and HPLC-DAD/FLD. Limits of detection (LODs) of the test pesticides ranged from 0.0004 to 0.005 mg/kg. Recoveries of the target pesticides from soil ranged from 72.69 to 115.28%. Four pesticides including cypermethrin were detected in the range of from 0.001 to 2.019 mg/kg, representing that their detection rate from greenhouse soils was 37.5%. The highest detection rate was observed from endosulfan which was detected from 16 site soils of the total samples, indicating that endosulfan is persistent in soil because of its very low mobility and high adsorption characteristics in soil. Based on the groundwater ubiquity scores (GUSs) of the pesticides detected from greenhouse soils, most of them have little possibilities of groundwater contamination except the fungicide vinclozolin with some leaching potential because of high water solubility and very low soil adsorption property.