• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.03a
• /
• pp.539-542
• /
• 1999

In this study, acrylate salt material of new chemical composition for injection grouting was prepared in the state of aqueous solution, and the chemical and physical properties of the material were investigated. The gelation time of the material was freely controllable through the control of added catalysts amount. As the viscosity of the material was very low (2∼3cps), its injection efficiency was expected to be very excellent. The variation of its viscosity plotted with the process of gelation revealed that the efficiency of its penetration into the ground soil was very excellent. The LD$\sub$50/ test on white mouse verified the toxicity of the material was very slight and substantially negligible. The grouting effect using the material was examined through field case histories.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.2
• /
• pp.99-106
• /
• 2010

We have investigated the rheological behaviours of emulsions containing polymers. The polymers used in this study were polyacrylamide and carboxy vinyl polymer. The emulsion with polyacrylamide shows better prior preference than that with carboxy vinyl polymer on the skin texture. In the toxicity test, such as, LLNA cell toxicity, skin organ culture and human patch test, polyacrylamide was the appropriate materials for the cosmetics. The viscosity of polyacrylamide shows maximum value in neutral pH and good stability against temperature. The decreasing effect of viscosity against salt was not good enough but showed a better result than that of carboxy vinyl polymer. Two times the amount of polyacrylamide should be used for the formation of a similar viscosity of carboxy vinyl polymer. Yield value of polyacrylamide was low and the effect for the stabilizing emulsions was also low.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.30 no.4
• /
• pp.28-34
• /
• 1998

Polyvinyl acetate emulsion has been widely used as adhesives for wood and paper, paint additives and binders for fiber, leather, and other materials because it is an excellent adhesive with many advantages including low in toxicity risks and manufacturing cost. It is expected the consumption of polyvinyl acetate emulsion as adhesives will increase in cigarette industry as well as in paperboard coating industry. Recently the operation speed of the cigarette tip wrapper increased so substantially that improvement of the emulsion properties is required including good wet tack development, narrow and controlled particle size distribution, low viscosity, etc. In this study the effects of such polymerization conditions as the type and amount of emulsifier, internal or external plasticizing, and emulsification methods on the viscosity and particle size of polyvinyl acetate emulsions were examined. Results showed that polyvinyl alcohol with a high degree of hydrolysis and low molecular weight and nonionic surfactants are superior to anionic surfactant in improving adhesion and emulsion stability. They also tend to produce emulsions with smaller particle size. External plasticization with dipropylene glycol dibenzoate was more effective in improving flexibility than internal plasticization with butyl acrylate. Monomer emulsification under high shear was more effective in decreasing the particle size.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.55-58
• /
• 2004

Phenolin resin, prepared form phenol and formaldehyde, is one of the oldest thermosetting resins available. Phenolic resins are cured via condensation polymerization with evolution of water, which in molding process is a big problem. The use of phenolic resins in glass fiber composites is growing, primarily due to their low flame spread, low smoke generation and low smoke toxicity properties. SMC of phenolics has been rearched since the 1986. The technology challenge was to match resin viscosity, handling and cure with those for the polyester SMC to avoid any special processing for fabricators and end users. Phenolic SMC was chosen because of the ease of molding to the required shape with light- weight, thin wall structure and with excellent fire protection.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2002.10a
• /
• pp.172-172
• /
• 2002

Previously, we reported a novel polymeric micellar solubilizer, Aceporol 330, that showed relatively low toxic effects when it was compared with that of Cremophor EL which is currently being used for paclitaxel. In this study, we have developed a new micellar solubilizer, Aceporol 460, that has 3-4 times higher loding capacity for paclitaxel than Aceporol 330. The single-dose and the repeated-dose toxicity of Aceporol 460 were evaluated in ICR mice. For single dose toxicity test, male and female mice were randomly assigned to one of five study groups to receive, and injected intravenously with dosages of 0, 3, 4mL Cremophor EL/kgbody weight, and 3, 4mL Aceporol 460/kg body weight, respectively. In both male and female mice, LD50 for Aceporol 460 can not he determined even at the maximal administrable dosage, 4mL/kg due to the high viscosity of chemical and there was no significant change in body weight, hematological and serum biochemical analysis, organ weight, and histopathological examination compared with that of Cremophor EL. For the repeated dose toxicity test, male and female mice were given the dosage of 0, 1.6mL Cremophor EL/kgbody weight/day, and 1.6mL Aceporol 460/kg body weight/day for 2 weeks. Results of repeated dose toxicity tests for 2 weeks suggested that Aceporol 460 treated group show no significant toxicological findings with body weight, hematological and serum biochemical analysis, organ weight, urinalysis, and ophthalmoscopic and histopathological examination compared with that of Cremophor EL. These results indicate that Aceporol 460 have higher paclitaxeL-loading capacity than Aceporol 330 and less toxic effects than Cremophor EL in male and female mice.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.2
• /
• pp.11-18
• /
• 2022

Recently, as flexible electronic device-related technologies have received worldwide attention, the development of wiring and bonding technologies using liquid metals is required in order to improve problems such as formability in the manufacturing process of flexible devices and performance and durability in the bending state. In response to these needs, various studies are being conducted to use gallium and gallium-based alloys (eutectic Ga-In and eutectic Ga-In-Sn, etc.) liquid metals, with low viscosity and excellent electrical conductivity without toxicity, as low-temperature bonding materials. In this paper, the latest research trends of low-temperature bonding technology using gallium and gallium-based alloys are summarized and introduced. These technologies are expected to become important base technologies for practical use in the fields of manufacturing flexible electronic devices and low-temperature bonding in microelectronic packages in the future.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.387-392
• /
• 2005

Recently, dimethyl carbonate (DMC) is considered as an alternative of MTBE (methyl tert-butyl ether), additive for non-leaded gasoline with their fast biodegradation rate and low toxicity. DMC is usually synthesized so far by oxidative carbonylation of methanol, and recently developed synthetic process is also started with methanol. Since the phase equilibria of the system, consisted of DMC and methanol or other reaction products on different temperature and pressure is necessary for the optimum separation process design and operation. However the reported phase equilibria and physical properties for DMC mixtures in the Dortmund Data Bank (DDB; thermodynamic property data bank) are quite rare. Besides, infinitely dilute properties are not found. In this work, isothermal vapor-liquid equilibria at 333.15 K for methanol+DMC binary system and mixing properties, excess molar volume and viscosity deviation at 298.15 K are directly measured and correlated. Additionally, infinitely dilute activity coefficient of methanol in the DMC solvent at three different temperatures are measured and compared with predicted values using modified UNIFAC (Dortmund).

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.610-613
• /
• 2012

In this study, plant extracts including 25% Saururus chinensis, 20% Morus bombycis stem and 20% Morus papyrifera stem were tested to use as possible cosmetic agent. As cosmetic effect test, cell toxicity test, elastase inhibition assay, tyrosinase inhibition assay, anti-oxidation assay and temperature stability test were done as cosmetic assays. Plant extract showed low cell toxicity, excellent elastase inhibition and anti-oxidation effect, however, tyrosinase inhibition effect was lower. Skin, lotion and essence formulation was made using plant extracts and temperature stability test was done. Skin and essence indicated good stability, however, lotion showed phase separation and severe viscosity variation, which means lotion formulation change. From the research, plant extracts including Saururus chinensis, Morus bombycis stem and Morus papyrifera stem were suitable for possible cosmetic agent.

• Journal of Food Hygiene and Safety
• /
• v.24 no.4
• /
• pp.352-356
• /
• 2009

The purpose of this study was to introduce the toxicological study review to evaluate the safety of PDMS on the 69th JECFA meeting. Polydimethylsiloxane is a polymer and its ADI was established at 23rd JECFA meeting in 1979. The ADI was maintained although the specification was expanded at its 26th, 29 th, 37 th meetings. Recently, it was reported that PDMS with low molecular weight and viscosity has high absorption rate and different toxicity, so it was submitted at 69th meeting. Toxicological studies of PDMS were submitted from the sponsor and additional information is collected from a document searching. The toxicological studies were reviewed in accordance with the 'Guidelines for the preparation of toxicological working papers for the Joint FAO/WHO Expert Committee on Food Additives'. In the available acute, sub-chronic and chronic toxicity studies on PDMS, dose-related increases in incidence and severity of ocular lesions(corneal crystal, inflammation of the corneal epithelium etc.) were consistently observed after oral dosing. It seems to be a local irritant effect, but the mechanism by which the ocular lesions arose is unclear, although the lack of absorption of PDMS indicates that it is unlikely to be a direct systemic effect. Consequently, the relevance of the ocular lesions for food use of PDMS could not be determined. The ADI of PDMS was re-established from 0-1.5 mg/kg bw/day to 0-0.8 mg/kg bw/day by applying additional safety factor 2 based on its ocular toxicity. The result of 0-0.8 mg/kg bw/day is a temporary ADI until further data are provided to 2010.