• 한국안전학회지
• /
• 제13권2호
• /
• pp.104-108
• /
• 1998

In order to evaluate the performances of safety valves for low pressure, the popping pressure and flow rate of the natural gas have been investigated. The measured results of the popping pressure show that there is a big scattering depending on the manufacture year of a safety valve. And sample A showed the ideal popping pressure mode compared to other B and C samples. The popping flow rate of the safety valve is proportional to the seat size as the inlet pressure increases. These results may be used as a guideline for a design and diagnosis of the safety valve.

• 한국광학회지
• /
• 제20권1호
• /
• pp.29-33
• /
• 2009

본 연구에서는 저간섭성 반사계(Optical low-coherence reflectometry)를 이용하여 한 번의 측정으로 투명 시료의 두께와 굴절률을 동시에 측정하는 기술을 제안하였다. 제안된 방법은 유한 반경을 가진 시준된 광속을 시료의 경계 영역으로 입사시키는 것으로써, 시료가 있는 부분과 없는 부분으로부터 반사된 광속에 의한 간섭 무늬들을 한 번에 획득할 수 있다. 한번의 측정을 통해 얻어진 두 종류 간섭 무늬들의 상대적인 위치 차이를 이용하여 시료의 두께와 굴절률을 동시에 결정할 수 있었다. 굴절률의 정밀도는 이송장치의 위치 정밀도가 향상되고, 시료의 두께가 두꺼워 질수록 개선될 수 있으며, 본 실험에서는 약 $10^{-3}$의 정밀도로 굴절률을 결정할 수 있었다.

• 한국분말재료학회지
• /
• 제30권2호
• /
• pp.140-145
• /
• 2023

Although the Ti-6Al-4V alloy has been used in the aircraft industry owing to its excellent mechanical properties and low density, the low formability of the alloy hinders broadening its applications. Recently, laser-powder bed fusion (L-PBF) has become a novel process for overcoming the limitations of the alloy (i.e., low formability), owing to the high degree of design freedom for the geometry of products having outstanding performance used in high-tech applications. In this study, to investigate the effect of bulk shape on the microstructure and mechanical properties of L-PBFed Ti-6Al-4V alloys, two types of samples are fabricated using L-PBF: thick and thin samples. The thick sample exhibits lower strength and higher ductility than the thin sample owing to the larger grain size and lower residual dislocation density of the thick sample because of the heat input during the L-PBF process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권3호
• /
• pp.204-209
• /
• 2004

A partial matched filter (PMF) for semi-coherent correlation code acquisition of the DSSS-CPFSK signal is proposed. It is a calculation-reduced structure of the hard-limited signal based FIR filter, yet its code acquisition time is equal to that of the hard-limited signal based FIR filter. The PMF eliminates duplicate calculations by utilizing the characteristic that the hard-limited DSSS-CPFSK signal has same value in several consecutive samples. For example, the PMF can achieve about 95% reduction in gate size, as compared to the hard-limited signal based FIR filter, when the modulation index of the DSSS-CPFSK signal is equal to 1.5 and the sample rate is equal to 40 sample/chip.

• 산업기술연구
• /
• 제10권
• /
• pp.83-88
• /
• 1990

The samples used for this work were low grade c1ay($Fe_2O_3$ : 2.90%, $TiO_2$ : 1.65%) produced from Youngsan-po district, and for the iron-bearing impurities removal having a bad influence on Kaoline sample was carried out column floatatoin using Oleic acid, Potassium oleat, Aero 840 promotor, Aero 870 promotor and Keroseneas collectors. For removal of the iron-vearing impurities from the kaoline, investigated first chemical composition size distribution of Kaoline sample, also performanced a basic study on pulp density, collector and pH change on a sort of frother. The flotation separation of impurities from kaoline can be achieved by using both oleic acid and Aero 840 promotor as collectors within narrow acid limits(pH 2-3). Pine oil was more effective frother than MIBC with olelic acid as aa collector.

• 품질경영학회지
• /
• 제17권1호
• /
• pp.89-106
• /
• 1989

For Weibull distributed lifetimes, this paper presents asymptotically optimal accelerated life test plans for practical applications under intermittent inspection and type-I censoring. Computational results show that the asymptotic variance of a low quantile at the design stress as optimal criterion is insensitive to the number of inspections at overstress levels. Sensitivity analyses indicate that optimal plans are robust enough to moderate departures of estimated failure probabilities at the design and high stresses as input parameters to plan accelerated life tests from their true values. Monte Carlo simulation for small sample study on optimal accelerated life test plans developed by the asymptotic maximum likelihood theory is conducted. Simulation results suggest that optimal plans are satisfactory for sample size in practice.

• 대한안전경영과학회지
• /
• 제1권1호
• /
• pp.123-134
• /
• 1999

There are several models for process quality assurance by quality system (ISO 9000), process capability analysis, acceptance control chart and so on. When a high level process capability has been achieved, it takes a long time to monitor the process shift, so it is sometimes necessary to develop a quicker monitoring system. To achieve a quicker quality assurance model for high-reliability process, this paper presents a model for process quality assurance when the fraction nonconforming is very small. We design an acceptance control chart based on variable quality characteristic and time-censored accelerated testing. The distribution of the characteristics is assumed to be normal or lognormal with a location parameter of the distribution that is a linear function of a stress. The design parameters are sample size, control limits and sample proportions allocated to low stress. These paramaters are obtained under minimization of the relative variance of the MLE of location parameter subject to APL and RPL constraints.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.247-257
• /
• 1999

There are several models for process quality assurance by quality system(ISO 9000), process capability analysis, acceptance control chart and so on. When a high level process capability has been achieved, it takes a long time to monitor the process shift, so it is sometimes necessary to develop a quicker monitoring system. To achieve a quicker quality assurance model for high-reliability process, this paper presents a model for process quality assurance when the fraction nonconforming is very small. We design an acceptance control chart based on variable quality characteristic and time-censored accelerated testing. The distribution of the characteristics is assumed to be normal of lognormal with a location parameter of the distribution that is a linear function of a stress. The design parameters are sample size, control limits and sample proportions allocated to low stress. These parameters are obtained under minimization of the relative variance of the MLE of location parameter subject to APL and RPL constraints.

• 한국환경과학회지
• /
• 제13권9호
• /
• pp.799-806
• /
• 2004

The filtration tests were made in cell with a low concentrated suspension. The suspension with a concentration of $C_{M}$=1.14～2.67$\cdot$$10^{-3}$ g/g consists of paper paint and water. The particles in the suspension have a particle size x<1${\mu}m$. The used depth filters consists of glass fibres, which are coated by polymer. The filtration in depth filters accorded in different mechanism, which were explained by physical models. The model which would be allows to make a promise of the filtration reaction. This filter media allows to get a high filtration time and a good separation rate. The Particle distribution is measured by a photon correlation spectroscopy(PCS). PCS measures particle sizes 0.03 ${\mu}m$${\mu}m$ in the suspension. The filtered suspension has a very low concentration Co{\le}5{\times}10_{-4}$ g/g of solid in sample. The PCS also informs us about the number of the particles in the suspension. The makes it possible to calculate the concentration of the in sample.

• Journal of Communications and Networks
• /
• 제14권5호
• /
• pp.481-486
• /
• 2012

Accurate and efficient estimation of the number of sources is critical for providing the parameter of targets in problems of array signal processing and blind source separation among other such problems. When conventional estimators work in unfavorable scenarios, e.g., at low signal-to-noise ratio (SNR), with a small number of snapshots, or for sources with a different strength, it is challenging to maintain good performance. In this paper, the detection limit of the minimum description length (MDL) estimator and the signal strength required for reliable detection are first discussed. Though a comparison, we analyze the reason that performances of classical estimators deteriorate completely in unfavorable scenarios. After discussing the limiting distribution of eigenvalues of the sample covariance matrix, we propose a new approach for estimating the number of sources which is based on a sequential hypothesis test. The new estimator performs better in unfavorable scenarios and is consistent in the traditional asymptotic sense. Finally, numerical evaluations indicate that the proposed estimator performs well when compared with other traditional estimators at low SNR and in the finite sample size case, especially when weak signals are superimposed on the strong signals.