• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.274-280
• /
• 2011

Due to their rapid growth and new paradigm applications, wireless sensor networks(WSNs) are morphing into low power personal area networks(LoWPANs), which are envisioned to grow radically. The fragmentation and reassembly of IP data packet is one of the most important function in the 6LoWPAN based communication between Internet and wireless sensor network. However, since the 6LoWPAN data unit size is 102 byte for IPv6 MTU size is 1200 byte, it increases the number of fragmentation and reassembly. In order to reduce the number of fragmentation and reassembly, this paper presents a new scheme that can be applicable to 6LoWPAN. When a fragmented packet header is constructed, we can have more space for data. This is because we use 8-bits routing table ill instead of 16-bits or 54-bits MAC address to decide the destination node. Analysis shows that our design has roughly 7% or 22% less transmission number of fragmented packets, depending on MAC address size(16-bits or 54-bits), compared with the previously proposed scheme in RFC4944. The reduced fragmented packet transmission means a low power consumption since the packet transmission is the very high power function in wireless sensor networks. Therefore the presented fragmented transmission scheme is well suited for low-power wireless sensor networks.

• Journal of Information Processing Systems
• /
• v.13 no.6
• /
• pp.1602-1612
• /
• 2017

Since rapidly disseminating of Internet of Things (IoT) as the new communication paradigm, a number of studies for various applications is being carried out. Especially, interest in the smart medical system is rising. In the smart medical system, a number of medical devices are distributed in popular area such as station and medical center, and this high density of medical device distribution can cause serious performance degradation of communication, referred to as the coexistence problem. When coexistence problem occurs in smart medical system, reliable transmitting of patient's biological information may not be guaranteed and patient's life can be jeopardized. Therefore, coexistence problem in smart medical system should be resolved. In this paper, we propose a distributed coexistence mitigation scheme for IoT-based smart medical system which can dynamically avoid interference in coexistence situation and can guarantee reliable communication. To evaluate the performance of the proposed scheme, we perform extensive simulations by comparing with IEEE 802.15.4 MAC protocol which is a traditional low-power communication technology.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.373-376
• /
• 2008

Wireless sensor networks consist of thousands of sensor nodes that have low power, low footprint and low computational capacities. So the burning issues in the design and deployment of these sensor nodes in the practical application areas include the energy conservation and network lifetime. Efficient routing schemes can help reduce the energy consumption and thus increase the network lifetime. This paper deals with the comparative analysis of popular routing protocols such as LEACH, LEACH-C, MTE, and PEGASIS. The protocols are compared by using performance me tries such as system lifetime, the time for first node death, and total system energy.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1076-1089
• /
• 2012

Home automation networks are good environments for merging sensor networks and consumer electronics technologies. It is very important to reduce the energy consumption of each sensor node because sensor nodes operate with limited power based on a battery that cannot be easily replaced. One of the primary mechanisms for achieving low energy operation in energy-constrained wireless sensor networks is the duty-cycle operation, but this operation has several problems. For example, unnecessary energy consumption occurs during synchronization between transmission schedules and sleep schedules. In addition, a low duty-cycle usually causes more performance degradation, if the network becomes congested. Therefore, an appropriate control scheme is required to solve these problems. In this paper, we propose UDC (Unsynchronized Duty-cycle Control), which prevents energy waste caused by unnecessary preamble transmission and avoids congestion using duty-cycle adjustment. In addition, the scheme adjusts the starting point of the duty-cycle in order to reduce sleep delay. Our simulation results show that UDC improves the reliability and energy efficiency while reducing the end-to-end delay of the unsynchronized duty-cycled MAC (Media Access Control) protocol in sensor-based home automation networks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.6
• /
• pp.897-906
• /
• 2022

In this paper, we propose a novel MAC protocol based on the harmonic transmission of ACK, called HAT-LoRa, for improving the reliability and the utilization in multiple gateway LoRa Networks. LoRa is basically vulnerable to collision due to the primitive pure ALOHA-like MAC. Whereas data frame delivery can be guaranteed by the transparent bridge of multiple receiving gateways, ACK is still transmitted by a single gateway in LoRa Network. HAT-LoRa provides the augmented reception opportunity of ACK via the simultaneous transmissions of identical ACK in multiple spreading factors. The proposed method reduces the expected transmission times of ACK double gateway environment as well as single gateway environment, by 55 and 60% in maximum, by 35% and 40% in average, in a single- and double-gateway environment, respectively. Especially, it outperforms under the environment where the distance between end device and gateways are similar to each other.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.104-108
• /
• 2007

Ad hoc networks are a type of mobile network that function without any fixed infrastructure. One of the weaknesses of ad hoc network is that a route used between a source and a destination is to break during communication. To solve this problem, one approach consists of selecting routes whose nodes have the most stable link cost. This paper proposes a method for improving the low power distributed MAC. This method is based on the context awareness of the each nodes energy in clustering. We propose to select a new scheme to optimize energy conserving between the clustering nodes in MANET. And this architecture scheme would use context-aware considering the energy related information such as energy, RF strength, relative distances between each node in mobile ad hoc networks. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2442-2450
• /
• 2010

Using sensor devices applied to various objects will be needed wireless network that it is easy to install in them. Tiny devices configured to processor that bas comparatively low computing ability are inappropriate to use devices that are wireless LAN, etc. In result, network devices needed to not only have simple communication protocol, but have Plug and Play function that it works as soon as it connects without installing any device driver. it also will industrially have both low power and low cost because of mobility of it. From IEEE 802.11 standard, WPAN(Wireless Personal Area Network) included in LAN is being developed by WPAN WG(Working Group) on area with low power consumption and low complexity. In addition to, it is standardizing MAC and PRY of the standard that is expected to wirelessly communicate within 10m. WPAN will be used generally in the more near future because of both low power and low cost of Zigbee. In this paper we designed zigbee based user authentication module for a automotive smart-key system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.251-259
• /
• 2014

In this paper, we propose Low Energy Service Discovery (LESD) protocol for common discovery mode of IEEE 802.15.8 Peer Aware Communications (PAC). In order to minimize power consumption, Basic Repetition Block (BRB) is defined. Device is able to select operating mode and synchronize other devices through it. Proposed MAC procedure is Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) based on overhearing technique. Even if device has not been received response signal since transmitted request signal, it is able to discover other devices of same group through the overhearing technique. IEEE 802.15.8 PAC has required that performances of common discovery mode are presented about discovered devices during the simulation time, discovery latency and average power consumption. By considering the number of devices per group and channel environment, two scenarios are evaluated through system level simulation and the simulation results of proposed scheme are compared with CSMA/CA in same simulation conditions. As a result, proposed scheme is able to get high energy efficiency of devices as well as increase the number of discovered devices during simulation time when the longer the number of devices is distributed over a limited area.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.11-19
• /
• 2010

ZigBee is a standard for wireless personal area networks(WPANs) based on the IEEE 802.15.4 standard. It has been developed for low cost and low power consumption. There are two alternative routing schemes that have been proposed for the ZigBee standard: Ad-hoc On-Demand Distance Vector(AODV) and tree routing. The tree routing forwards packets from sensors to a sink node based on the parent-child relationships established by the IEEE 802.15.4 MAC topology formation procedure. In order to join the network, a sensor node chooses an existing node with the strongest RSSI(Received signal strength indicator) signal as a parent node. Therefore, some nodes carry a large amount of traffic load and exhaust their energy rapidly. To overcome this problem, we introduce a new metric based on link quality and traffic load for load balancing. Instead of the strength of RSSI, the proposed scheme uses the new metric to choose a parent node during the topology formation procedure. Extensive simulation results using TOSSIM(TinyOS mote SIMulator) show that the CFR scheme outperforms well in comparison to the conventional tree routing scheme.