• Korean Journal of Environmental Biology
• /
• v.27 no.4
• /
• pp.323-333
• /
• 2009

Parabens are alkyl esters of p-hydroxybenzoic acid, which are widely used in foods, cosmetics, and pharmaceutic products as preservatives. Absorbed parabens are metabolized fastly and excreted. Actually human body is exposed to complex mixture of parabens. Safety assessment at various toxicological end points revealed parabens have a little acute, subacute and chronic toxicities. Some reports have argued that as parabens have estrogenic activity, they are associated with the incidence of breast cancer through dermal absorption by cosmetics. There is an inference that antiandrogenic activity of parabens may give rise to a lesion of male reproductive system, but also there is an contrary. At cellular level, parabens may inhibit mitochondrial function of sperms and androgen production in testis, but also there is an contrary. Parabens seem to have little or no toxicity in embryonic development. Parabens can cause hemolysis, membrane permeability change in mitochondria and apoptosis, suggesting cellular toxicity of parabens. Parabens evoked endocrine disruption in several fish species and have toxic effect on small invertebrates and microbes. Therefore, the toxicity of parabens should be considered as a potentially toxic chemical in the freshwater environment. In conclusion, though parabens may be considered as a low toxic chemical, more definite data are required concerning the endocrine disrupting effect of parabens on human body and aquatic animals according to route and term of exposure as well as the residual concentration of parabens.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.12
• /
• pp.1662-1671
• /
• 2007

The change in physical properties of polypropylene nonwoven fabrics used as top sheet for disposable sanitary goods was carried out using chitosan that is a type of natural polymer and has excellent human affinity by varying the molecular weight and concentration of chitosan. Low molecular weight(LMW) chitosan treated fabrics were found to be evenly coated on fabrics and had better dyeability by apparent dye uptake and its deodorization rate increased over the time. On the other hand, high molecular weight(HMW) chitosan treated fabrics showed higher add-on ratio and its dynamic water absorption rate and represented an increase in water transport rate. With chitosan treatment, its air permeability was improved. Regardless of the type of bacteria and chitosan concentration, its antibacterial activity was excellent in the case of the HMW chitosan treatment. In this regard, chitosan treatments by using a relatively high molecular weight was found as an effective way in the functional improvement of moisture properties and antibacterial activity including their most important performance in sanitary nonwoven fabrics.

• Economic and Environmental Geology
• /
• v.39 no.3 s.178
• /
• pp.269-284
• /
• 2006

Aquifer responses to the river stage fluctuations were analyzed between the groundwater level and the river stage in an alluvial aquifer. The auto-correlation and cross-correlation as a time series analysis were applied. Study site is a floodplain in the Mangyeong river. Groundwater levels in each depth representing the silt and sand(SS), gravel and sand(GS), and weathered zone(WZ) layer were monitored. The groundwater levels were more sensitive to the river stage fluctuations than rainfall. Since the river stages are influenced by the gate operations downstream and tide, show periodic patterns, and the correlation coefficients with rainfall is low. Cross-correlation function between groundwater level in each depth do not show any delay time, then response time is very short to each depth. Cross-correlation analysis were performed to estimate the response time of groundwater levels to river stage fluctuations. Groundwater levels respond to the river stage within 30 minutes to 1 hour in wells near the stream. Short time lag between groundwater level and river stage indicates the quick response. A different response time imply the hydraulic inhomogeneity of the site, and a probable high permeability zone between river and aquifer can be inferred. Mangyeong-river in study site is a gaining stream normally, and river stage rising by gate operation or floods makes river water flow into groundwater. The auto-correlation and cross-correlation functions as a time series analysis can be a good tool to interpret the aquifer responses to stream stage fluctuation

• Journal of Sericultural and Entomological Science
• /
• v.27 no.1
• /
• pp.24-30
• /
• 1985

The effect of some organic solvents on interrupting diapause of Bombyx mori eggs was examined to provide a clue to the mechanism of diapause initiation. Methyl alcohol and benzene proved to be efficient in developing the prospective diapause eggs upto the stage of hatching or body pigmentation of the embryos. On the other hand, most of the eggs soaked in chloroform and mixture solution of chloroform-methyl alcohol (2:1) died in the early embryonic developmental stage with yellow or red brown colours, and the egg weights decreased upto ca. 40% of the original weight 8 days after the treatments. Methyl alcohol treatment for 2, 5 and 10 min to the 5hr-old-eggs led to empergence of the larvae, with high incidence (70∼80%) in the race of Kumchu X Chonghwa and with low indidence (1∼4%) in Daezo. The effect of same treatment to 20hr old eggs decreased to ca. 10% in the emergence of larvae in Kumchn X Chonghwa and increased to 20∼30% in Daezo, while the effect disappeared shortly after the diapause initiation (48hr-old-eggs). Considering the high dependency upon the egg age of the sensitivity to solvents, it was supposed that initiation and termination of diapause may be controlled by different mechanism. It was also suspected that the solvents exert their effect on the permeability of the eggshell.

• International Journal of Highway Engineering
• /
• v.4 no.2 s.12
• /
• pp.1-8
• /
• 2002

Latex modified concrete(LMC) became to be applied as a new material for newly constructed bridge deck overlays in Korea due to its excellent bond strength, flexural strength and impermeability against water and chloride. However, it could not be adopted at repair job site because of its long curing time required. Thus, a research on latex modified concrete with rapid-setting cement(RSLMC) is necessary if it could develope the sufficient strength for early opening to traffic. This study focused on the durability of latex modified concrete with rapid-setting cement mainly on water permeable resistance and freeze-thaw resistance. The main experimental variables were latex contents(0, 5, 10, 15 and 20%) and antifoamer contents (0, 1.6, 3.2, 4.8 and 6.4%). Test results show that the permeability of RSLMC is very low indicating below 100 coulombs at 15% of latex contents at all antifoamer contents. The freeze-thaw resistance of RSLMC maintains above 90% of relative dynamic modulus at 3.2% of antifoamer content until 300 freezing-thawing cycles.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.3-10
• /
• 2005

The purpose of this study is to investigate the properties of composite systems using polymer cement and epoxy resins for waterproofing and anti-corrosion to concrete structures such as water supply facilities and sewage-works. For the waterproofing and anti-corrosion of concrete structures, there can be required various properties such as absorption capacity and water permeability, adhesion and tensile strength, hair crack-resistance, impact-resistance, repeated low and high temperature test and chemical resistance, soundness for drinking water, soundness for drinking water and etc. In this study these engineering properties of composite systems using polymer-modified mortar and epoxy resins were examined and could be confirmed to satisfy the guidelines of KS. Especially, it was turn out that the adhesion properties was excellent and high crack-resistance up to 1.49 mm will be perform.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.5
• /
• pp.407-415
• /
• 2008

The tubes in heat exchanger are typically made from copper alloy, stainless steel, carbon steel, titanium alloy material. type-439 ferritic stainless steel is ferromagnetic material, and furnish higher heat transfer rates than austenitic stainless steels and higher resistance to corrosion-induced flaws. Ferritic stainless steel can typically be found in low-pressure(LP) feedwater heaters and moisture separator reheaters(MSRs). LP feedwater heaters generally utilize thin wall type-439 stainless steel tubing, whereas MSRs typically employ a heavier wall tubing with integral fins. Service-induced damage can occur on the OD(outside diameter) surface of type-439 ferritic stainless steel tubing which is employed for MSRs tubing, and the most typical damage mechanism is vibration-induced tube-to-TSP(tube support plate) wear and fatigue cracking. The wear has been reported that occurs mainly on the OD surface. Accordingly, in this study, we have evaluated the flaw sizing capability of magnetic saturation eddy current technique using magnetic saturation probe and flawed specimen.

• Journal of Soil and Groundwater Environment
• /
• v.22 no.3
• /
• pp.27-41
• /
• 2017

This study dealt with the characteristics and the interrelations of hydrogeological parameters such as hydraulic conductivity, dispersivity and effective porosity of unconsolidated sediments for providing the basic data necessary for the planning of the management and preservation of groundwater quality in the Nakdong River Delta of Busan City, Korea. Groundwater quality in this area has been deteriorated due to seawater intrusion, agricultural fertilizer and pesticide, industrial wastewater, and contaminated river water. The physical properties (grain size distribution, sediment type, sorting) and aquifer parameters (hydraulic conductivity, effective porosity, longitudinal dispersivity) were determined from grain size analysis, laboratory permeability test and column tracer test. Among 36 samples, there were 18 Sand (S), 7 Gravelly Sand (gS), 5 Silty Sand (zS), 5 Muddy Sand (mS), and 1 Sandy Silt (sZ). Hydraulic conductivity was determined through a falling head test, and ranged from $9.2{\times}10^{-5}$ to $2.9{\times}10^{-2}cm/sec$ (0.08 to 25.6 m/day). From breakthrough curves, dispersivity was calculated to be 0.35~3.92 cm. Also, effective porosity and average linear velocity were obtained through the column tracer test, and their values were 0.04~0.46 and 1.06E-04~6.49E-02 cm/sec, respectively. Statistical methods were used to understand the interrelations among aquifer parameters of hydraulic conductivity, effective porosity and dispersivity. The relation between dispersivity and hydraulic conductivity or effective porosity considered the sample length, because dispersivity was affected by experimental scale. The relations between dispersivity and hydraulic conductivity or effective porosity were all in inverse proportion for all long and short samples. The reason was because dispersivity was in inverse proportion to the groundwater velocity in case of steady hydrodynamic dispersion coefficient, and groundwater velocity was in proportion to the hydraulic conductivity or effective porosity. This study also elucidated that longitudinal dispersivity was dependent on the scale of column tracer test, and all hydrogeological parameters were low to high values due to the sand quantity of sediments. It is expected that the hydrogeological parameter data of sediments will be very useful for the planning of groundwater management and preservation in the Nakdong River Delta of Busan City, Korea.

• The Journal of Engineering Geology
• /
• v.15 no.2 s.42
• /
• pp.145-154
• /
• 2005

This study conducted to develop an assessment method of runout distance of debris flow that is a major type of landslides in Korea. In order to accomplish the objectives, this study performed detailed field survey of runout distance and laboratory soil tests using 24 landslides over three pilot sites. Based on the data of the field survey and the laboratory tests, an assessment method of runout distance was suggested using the artificial neural network. The input data for the analysis of artificial neural network are change rate of slope angle, Permeability coefficient of in-situ soil, dry density, void ratio, volume of debris and the measured runout distance. The analyzed results using the artificial neural network show low error rate of inference distributing lower than $10\%$. Some cases have $5\%$ and $2\%$ of error rates of inferences. The results can be thought as excellent teaming rates. However, it is difficult to be accepted as excellent results if it is considered with the results derived using only 24 landslide data. Therefore, more landslide data should be surveyed and analyzed to increase the confidence in the assessment results.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.203-212
• /
• 2010

The aim in this study is used to develop the remediation technologies for contaminated ground water. Slug, single well pumping and step-drawdown tests have been used to obtain hydraulic parameter estimates in the field. Slug tests yield hydraulic conductivity values using the Bouwer and Rice and C-B-P analysis methods. The mean and median hydraulic conductivity values of Bouwer and Rice method are $4.48{\times}10^{-3}$ and $1.16{\times}10^{-3}cm/sec$, respectively. On the other hand, C-B-P method gave mean and median hydraulic conductivity values of $2.37{\times}10^{-3}$ and $7.09{\times}10^{-4}cm/sec$, respectively. These analyses show a trend for the Bouwer and Rice method to yield lower hydraulic conductivity values in low permeability zones of granite in the study area. Sing well pumping test data were calculated through type curve in GW7, GW12 and MW9 wells. It could be interpreted that the differences of hydraulic conductivity and transmissivity values between GW7 and GW12, MW9 is related with fault clays and fractures in the bedrock among the wells. Step-drawdown tests were carried out in the KDPW1 and KDPW2 wells. The hydraulic parameter of KDPW1 and KDPW2 showed very litter difference between the values. The study of hydraulic parameter estimates can be used to purify in contaminated groundwater.