• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2121-2130
• /
• 2015

In this paper, we analyze LM-MIMO (load-modulation multiple-input multiple-output) system with single RF chain. And then, we confirm that load modulation technique can support generation of high-order m-PSK modulation and m-QAM modulation in LM-MIMO system. Finally we evaluate performance of LM-MIMO system with load modulation. Conventional MIMO system requires a number of RF chains for expansion of MIMO dimension. A number of RF chains can cause various problems. On the other hand, although LM-MIMO system is expanded, LM-MIMO system requires single RF chain only. Therefore, LM-MIMO system has low-complexity and low power consumption. As results, we can confirm that load modulation of T-model can modulate high-order m-PSK and m-QAM singal. Also, we can confirm that $4{\times}4$ LM-MIMO system using load modulation has a similar performance to conventional $4{\times}4$ MIMO system.

• Journal of Power Electronics
• /
• v.17 no.6
• /
• pp.1413-1421
• /
• 2017

In order to control the output voltage in a dual active bridge converter, this paper establishes a theoretical inductor current equation for a dual-pulse-width-modulation scheme that ensures low switching loss. It also proposes a modulation strategy that minimizes conduction loss. When compared to the conventional single-pulse-width-modulation strategy, the proposed approach can reduce the inductor current RMS and improve efficiency in the low power region, as verified through simulation and experimental results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.21-27
• /
• 2013

In this paper, we propose a low-complexity Turbo coded BICM-ID (bit-interleaved coded modulation with iterative decoding) system. A Turbo code is a powerful error correcting code with a BER (bit error rate) performance very close to the Shannon limit. In order to increase spectral efficiency of the Turbo code, a coded modulation combining Turbo code with high order modulation is used. The BER performance of Turbo-BICM can be improved by Turbo-BICM-ID using iterative demodulation and decoding algorithm. However, compared with Turbo-BICM, the decoding complexity of Turbo-BICM-ID is increased by exchanging information between decoder and demodulator. To reduce the decoding complexity of Turbo-BICM-ID, we propose a low-complexity Turbo-BICM-ID system. When compared with conventional Turbo-BICM-ID, the proposed scheme not only show similar BER performance but also reduce the decoding complexity.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.3
• /
• pp.336-341
• /
• 2014

When using a higher-order modulation scheme, there are variations in bit-reliability depending on the bit position in a modulation symbol. Variations of bit-reliability in the codeword block lower the decoding performance. Also, the decoding performance increases as the sum of the bit-reliabilities in the codeword block increases. This paper presents a novel hybrid automatic repeat request scheme that increases the sum of the reliabilities of the transmitted bits by lowering the modulation order, and decreases the variations of bit-reliability in the codeword block by preferentially retransmitting bits with low reliability. The proposed scheme outperforms the constellation rearrangement scheme. Furthermore, the proposed scheme also provides a good solution in cases where the size of the retransmission block is smaller than the size of the initial transmission block.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.5
• /
• pp.428-438
• /
• 2021

For long-range communication in deep water, low carrier frequency is efficient due to a decrease in transmission loss. However, there is a limitation in that the data rate decreases due to a narrow bandwith. In order to increase the data rate in an environment with a limited bandwidth, it is necessary to design a higher-order modulation scheme. This paper analyzes the long-range communication data modulated by higher-order modulation schemes. The long-range communication experiment (23 km ~) was conducted in East Sea in October 2020. During the experiment, a vertical line array was utilized and communication sequences were modulated by Phase Shift Keying (PSK) and Quadrature Amplitude Modulation (QAM) schemes and transmitted by a towed source. In more detail, PSK modulation consists of quadrature PSK and 8PSK, QAM modulation consists of 8QAM and 16QAM. Time reversal processing is applied to mitigate inter-symbol interference by utilizing the correlation between received signals and channel impulse responses. All modulation schemes show successful results at 23 km range, demonstrating the feasibility of higher-order modulation in long-range communication.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5381-5399
• /
• 2016

Currently, the quantize-and-forward (QF) scheme with high order modulation and quantization has rather high complexity and it is thus impractical, especially in multiple relay cooperative communications. To overcome these deficiencies, an improved low complex QF scheme is proposed by the combination of the low order binary phase shift keying (BPSK) modulation and the 1-bit and 2-bit quantization, respectively. In this scheme, the relay selection is optimized by the best relay position for best bit-error-rate (BER) performance, where the relays are located closely to the destination node. In addition, an optimal power allocation is also suggested on a total power constraint. Finally, the BER and the achievable rate of the low order 1-bit, 2-bit and 3-bit QF schemes are simulated and analyzed. Simulation results indicate that the 3-bit QF scheme has about 1.8~5 dB, 4.5~7.5 dB and 1~2.5 dB performance gains than those of the decode-and-forward (DF), the 1-bit and 2-bit QF schemes, at BER of $10^{-2}$, respectively. For the 2-bit QF, the scheme of the normalized Source-Relay (S-R) distance with 0.9 has about 5dB, 7.5dB, 9dB and 15dB gains than those of the distance with 0.7, 0.5, 0.3 and 0.1, respectively, at BER of $10^{-3}$. In addition, the proposed optimal power allocation saves about 2.5dB much more relay power on an average than that of the fixed power allocation. Therefore, the proposed QF scheme can obtain excellent features, such as good BER performance, low complexity and high power efficiency, which make it much pragmatic in the future cooperative communications.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.32-35
• /
• 1988

Simultaneous control of active and reactive power for superconducting magnetic energy storage is possible by a current source inverter with paise - width modulation. And a current source inverter is useful to reduce low order harmonics. In this paper, paise generating method for pulse - width modulation is studied and harmonics with and without paise - width modulation is compared.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.11-14
• /
• 2004

Digital Video Broadcasting - Satellite (DVB-S) [1] (EN 300 421(bibliography)) was introduced as a standard in 1994. However, by combing with higher order modulation, promise more powerful alternatives to the DVB-S / DVB-DSNG coding and modulation schemes. Variable rate coding and modulation (VCM) may employed to provide different levels of error protection to different service components. Adaptive coding and modulation (ACM) provides more exact channel protection and dynamic link adaptation to propagation conditions, targeting each individual receiving terminal. By these reasons, DVB-S2 introduced. This paper derives exact symbol error rate(SER) of 16-Amplitude Phase Shift Keying(APSK) modulation by using Craig's formula. 16-APSK modulation is used in DVB-S2. The difference between Union Bound and Craig's formula is 1.26dB in low SNR and 0.1dB in high SNR.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1186-1194
• /
• 2017

This paper proposes an improved low frequency Selective Harmonic Mitigation-PWM (SHM-PWM) technique. The proposed method mitigates the low order harmonics of the output voltage up to the $50^{th}$ harmonic well and satisfies the grid codes EN 50160 and CIGRE-WG 36-05. Using a modified criterion for the switching angles, the range of the modulation index for non-linear SHM equations is improved, without increasing the switching frequency of the CHB converter. Due to the low switching frequency of the CHB converter, mitigating the harmonics of the converter up to the $50^{th}$ order and finding a wider modulation index range, the size and cost of the passive filters can be significantly reduced with the proposed technique. Therefore, the proposed technique is more efficient than the conventional SHM-PWM. To verify the effectiveness of the proposed method, a 7-level Cascaded H-bridge (CHB) converter is utilized for the study. Simulation and experimental results confirm the validity of the above claims.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.132-139
• /
• 2011

The selective harmonic elimination pulse width modulation (SHEPWM) switching strategy has been applied to multilevel inverters to remove low harmonics. Naturally, the related equations do not have feasible solutions for some operating points associated with the modulation index (M). However, with these infeasible points, minimizing instead of eliminating harmonics is performed. Thus, harmful harmonics such as the $5^{th}$ harmonic still remains in the output waveform. Therefore, it is proposed in this paper to ignore solving the equation associated with the highest order harmonics. A reduction in the eliminated harmonics results in an increase in the degrees of freedom. As a result, the lower order harmonics are eliminated in more operating points. A 9-level inverter is chosen as a case study. The genetic algorithm (GA) for optimization purposes is used. Simulation results verify the proposed method.