• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.4
• /
• pp.88-95
• /
• 2021

In aviation meteorology, the low level wind shear is defined as a sudden change of head windbelow 1600 feet that can affect the departing and landing of the aircraft. Jeju International Airport is an area where low level wind shear is frequently occurred by Mt. Halla. Forecasting of such wind shear would be useful in providing early warnings to aircraft. In this study, we investigated the performance of statistical downscaling model, called Korea Meteorological Administration Post-processing (KMAP) with a 100 m resolution in forecasting wind shear by the complex terrain. The wind shear forecasts was produced by calculating the wind differences between stations aligned with the runways. Two typical wind shear cases caused by complex terrain are validated by comparing to Low Level Wind Shear Alert System (LLWAS). This has been shown to have a good performance for describing air currents caused by terrain.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.1
• /
• pp.127-131
• /
• 2022

The structural safety of prototype transport and storage containers for very low-level radioactive liquid waste was experimentally estimated for its localization development. Transport containers for radioactive liquid waste have been researched and developed, however, there are no standardized commercial containers for very low-level radioactive waste in Korea. In this study, the structural safety of the designated IP-2 type container capable of transporting and temporarily storing large amounts of very low-level liquid waste, which is generated during the operation and decommissioning of nuclear power plants, was demonstrated. The stacking and drop tests, which were conducted to determine the structural integrity of the container, verified that there was no external leakage of the contents in spite of its structural deformation due to the drop impact. This study shows the effort required for the localization of the technology used in manufacturing transport and storage containers for very low-level radioactive liquid waste, and the additional structural reinforcement of the container in which the commercial intermediate bulk container (IBC) external frame was coupled.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.301-304
• /
• 1997

Two options arising during implementation of an advanced model-based control system on a process with low-level loops are discussed. Strengths and deficiencies of the options are examined and methods to overcome the deficiencies are proposed. Simulation results of a CSTR and distillation column are presented to demonstrate the performance improvements.

• Journal of Korean Institute of Industrial Engineers
• /
• v.20 no.4
• /
• pp.99-111
• /
• 1994

Toguchi method is a systematic technique for designing high quality product at low cost. There are three steps in the Toguchi method, 1)system design, 2)parameter design, and 3)tolerance design. This paper considers the tolerance design for multiple performance characteristics which is practically important. We present two tolerance design procedures : grade selection and tolerance determining procedures. In grade selection procedure a scheme is presented that minimizes the sum of the price of low-level characteristics and the expected loss due to the variations of high-level characteristics. In tolerance determining procedure we determine the tolerances of the low-level characteristics.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.473-476
• /
• 2002

고도로 발달된 정보화 시대에서 우리가 원하는 정보를 짧은 시간, 적은 비용으로 서로 주고받기 위해서는 이것에 맞는 시스템이 요구된다. 반도체 chip의 대용량과 고속화됨으로써 TTL, LVTTL 등이 data 100Mbps 정도를 안전하게 전달 할 수 있는 능력이 있으므로 그 이상을 전달할 수 있는 새로운 Logic level이 필요하게 되었다. 이에 맞추어 신호 level의 여러 가지 중 본 논문에서는 Virtex II XC2V 1000 FF896을 이용하여 Differential I/O LVDS(Low Voltage Differential Signaling) level 특성을 clock, Data와의 전송 관계를 Eye_Pattern을 통해 살펴보았다.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.73-78
• /
• 2017

In this study, the risk level of architectural works was calculated by applying work period and number of input workers based on accidents records from 2012 to 2014 and the architectural works were divided into four groups(High-High, High-Low, Low-High, Low-Low) according to risk levels of fatal accidents and loss time accidents. And then questionnaire on the job stress level of workers was performed for 670 workers working in the architectural work using Korean Occupational Stress Questionnaire Form developed by KOSHA. And then the relationship between the risk level and job stress level of four groups was analyzed. Results showed that 1) risk levels of fatal and loss time accidents applied by work period and input workers were analyzed to be different with those of previous research based on the number of fatal and loss time accidents; 2) job stress level of workers has been analyzed to have a significant relationship with the risk level of fatal and loss time accident; 3) specially, the average of job stress level of 'HH(High-High)' group was higher than those of other groups; 4) among the subfactors of job stress, interpersonal conflict, job insecurity, organizational system and lack of reward were analyzed to be key factors to affect the risk level.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.25-31
• /
• 2008

We propose a low power level-up/down shifter with single supply that can be used at SoC with multiple supply. The proposed circuit interfaces IPs which are operated on the different supply voltages. The circuit is designed with a single supply that decreases the low power consumption and the complexity of supply routing and layout. The proposed circuit operated at 500MHz for level-up and at 1GHz for level-down. The level-up/down shifter improves noise immunity of the system at I/O circuit. The circuit is evaluated for 1.8V, 2.5V, 3.3V supply with 0.18um CMOS technology, respectively.

• The Journal of Information Systems
• /
• v.24 no.1
• /
• pp.45-66
• /
• 2015

This study empirically investigated the relationships among organizational culture, target costing, knowledge management activities, and corporate innovations. The results of this study showed that innovative and supportive culture positively affects the adoption degrees of target costing. According to the results, it was observed that target costing as well as innovative and supportive culture have a positive impact on levels of knowledge management activities(i.e., knowledge creation, sharing, storage, and application). It was also demonstrated that organizational culture has an indirect effect on activation of knowledge management activities through target costing. Thus, to enhance knowledge management activities, target costing must be aligned with appropriate types of organizational culture. In examining the impact of knowledge management activities on the frequencies of product and process innovations, no significant effect was found. Additional analyses that compare across three groups(i.e., low level group, middle level group and high level group in knowledge management activities) and between two groups(i.e., between high level group and middle level group or between high level group and low level group) were performed. The results of comparison showed that the degrees of product and process innovations are highest in high level group, but no significant differences are found in the degrees of innovations between middle level group and low level group.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.2
• /
• pp.96-105
• /
• 2021

Large-scale power converters consist of series or parallel module combinations. In these modular converter systems, the interleaving technique can be applied to improve capacitor reliability by reducing the ripple of the I/O current in which each module operates as a phase difference. However, when applying the interleaving technique for conventional three-level boost converters, the short-circuit period of the converter can be an obstacle. Such problem is caused by the absence of a low-level inductor of the conventional three-level boost converter. To solve this problem, a three-level boost converter with a low-level inductor is proposed and analyzed to enable interleaved operation. In the proposed circuit, the current ripple of the output capacitor depends on the neutral point connections between the modules. In this study, the ripple current is analyzed by the neutral point connections of the three-level boost converter that has a low-level inductor, and the effectiveness of the proposed circuit is proven by simulation and experiment.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.703-706
• /
• 1998

This paper presents an efficient substrate-bias generator(SBG)for low-power, high-density DRAM's The proposed SBG can supply stable voltage with switching the supply voltage of driving circuit, and it can substitude the small capacitance for the large capacitance. The charge pumping circuit of the SBG suffere no VT loss and is to be applicable to low-voltage DRAM's. Also it can reduce the power consumption to make VBB because of it's high pumping efficiency. Using biasing voltage with positive temperature coefficient, VBB level detecting circuit can detect constant value of VBB against temperature variation. VBB level during VBB maintaining period varies 0.19% and the power dissipation during this period is 0.16mw. Charge pumping circuit can make VBB level up to -1.47V using VCC-1.5V, and do charge pumping operation one and half faster than the conventional ones. The temperature dependency of the VBB level detecting circuit is 0.34%. Therefore the proposed SBG is expected to supply a stable VBB with less power consumption when it is used in low power DRAM's.