• Korean Journal of Health Education and Promotion
• /
• v.8 no.1
• /
• pp.87-97
• /
• 1991

The purpose of this study is to identify the important marriage variables influencing fertilty. The data on which this study is based was selected from the survey data which was nation-widely collected from 2,824 married women in 1989 as the Korean. Family Function Study performed by the Korea Institute for Population and Health. The data was analyzed by the methods such as Cross Tabulation, Pearson's Correlation, and Multiple Regression. And the data analysis was processed by SPSS. The results are as follows. 1. There are differences in fertility according to the socioeconomic factor. The higher the educational level of a married woman is the lower the fertility level. And if the decision of marriage was made by herself, the fertility level is significantly low. As the duration of living in a large city is longer and the educational level of her husband is higher, the fertility level is low. 2. There are differences is fertility according to the demographic factor. As the first marriage age of her and her husband, the fertility level was low. And when a couple doesn't live with the husband's parents and the size of a family is small, the fertility level is low. 3. Finally the factors affecting fertility were analyzed by the Stepwised Multiple Regression. The result shows that as the educational level of a married woman is higher, she herself decides the marriage, the first marriage level of her is higher, the size of a family is small, her husband is higher, the fertility level is low.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.99-111
• /
• 2016

This paper presents an integrated fault diagnosis algorithm for driving motor of In-wheel independent drive electric vehicle. Especially, this paper proposes a method that integrated the high level fault diagnosis and the low level fault diagnosis in order to improve a robustness and performance of the fault diagnosis system. The high level fault diagnosis is performed using the vehicle dynamics analysis and the low level fault diagnosis is carried using the motor system analysis. The validity of the high level fault diagnosis algorithms was verified through $Carsim^{(R)}$ and MATLAB/$Simulink^{(R)}$ cosimulation and the low level fault diagnosis's validity was shown by applying it to a MATLAB/$Simulink^{(R)}$ interior permanent magnet synchronous motor control system. Finally, this paper presents a fault diagnosis strategy by combining the high level fault diagnosis and the low level fault diagnosis.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1352-1357
• /
• 2011

Heights of a platform above the rail for the passenger train in the country are classified into two categories such as the low level (500mm; mainline) and the high level (1,135mm; metropolitan subway line) platforms. In order to operate similarly both a mainline railroad and a metropolitan subway line, as the requisite door safety system, it is necessary to develop the doorstep equipment of the rolling stock regardless of both the low and high level platforms. In this study, the application of doorstep equipments to use mixed with two types of platforms are examined on the supposition that the train only for the low level platform stops in the both low and high level platforms.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.484-489
• /
• 2011

Heights of a platform above the rail for the passenger train in the country are classified into two categories such as the low level (500mm; mainline) and the high level (1,135mm; metropolitan subway line) platforms. In order to operate similarly both a mainline railroad and a metropolitan subway line, as the requisite door safety system, it is necessary to develop the doorstep equipment of the rolling stock regardless of both the low and high level platforms. In this study, performance requirements of doorstep equipments used for two types of platforms are examined on the supposition that the train only for the low level platform could stop in the both low and high level platforms.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.747-750
• /
• 2005

In this paper, we propose a new level shifter circuit for reducing power consumption. The concept of the proposed level shifter is to use capacitive coupling effect to reduce short circuit current. The power consumption of the proposed level shifter is reduced up to 50%, compared to the conventional level shifter. Especially the proposed level shifter circuit works well with low temperature poly-Si (LTPS) TFTs. It can operate on low input voltage even with low-mobility, high and widely-varying threshold voltage of LTPS TFT.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.2
• /
• pp.586-594
• /
• 2015

This paper proposes a maximum efficiency operation strategy for three-level T-type inverter in entire operation areas. The three-level T-type inverter has higher and lower efficiency areas compared with two-level inverter. The proposed strategy aims to operate in the maximum efficiency point for the low-voltage and low-power home appliances. The three-level T-type inverter is analyzed in detail, and the two operation mode selection strategy is developed. The proposed algorithm is verified by theoretical analysis and experimental results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.7
• /
• pp.791-798
• /
• 1988

Films of Cr, Cu, and Al were deposited by the evaporation technique at the high vacuum level-high evaporation rate and the low vacuum level-low evaporation rate. We measured sheet resistance and light transmittance, and observed microstructure and diffraction pattern by TEM, and investigated oxygen content in thin film by AES. We discussed the relations among microstructure, sheet resistance, and light transmittance with AES data. We found that the films deposited at the high vacuum level-high evaporation rate have small oxygen content in thin film comparing to the films deposited at the low vacuum level-low vacuum level-low evaporation rate, and that the films having crystalline structure and larger grain size were formed in the case of the high vacuum level-high evaporation rate and they showed lower sheet resistance and lower light transmittance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1015-1018
• /
• 2004

We proposed a new cross-coupled level shifter circuit using low temperature poly-Si(LTPS) TFT. The proposed level shifter can operate on low input voltage in spite of low mobility and widely varying high threshold voltage of LTPS TFT. Also, the proposed level shifter operates at high frequency and reduces power consumption for having fast rising and falling time and shortening period flowing short-circuit currents.

• Journal of Plant Biology
• /
• v.12 no.3
• /
• pp.15-25
• /
• 1969

To investigate the radiation effect of P-32 on the soybean plants, the seeds treated with various levels of P-32 solution were sown and cultured in the pots. The growth of the plants and the contents of the macroelements were observed and the following results were obtained. 1) The linear growth of the plants at the early stage seemed to have been promoted by the low-level P-32 treatemnt. At the later growing stage, however, this difference among treatments were less conspicuous. 2) The plants of high level P-32 application showed some growth damaging symptom at the early growing stage. Later this damage was recorded as the time went on and these plants showed even better growth than the control. As a result at the late growing stage, they ensued highest growth. 3) The plants showed in general more growth at the low activity level than at the high-level at the early growing stage. At the late stage, however, the high-level activity promoted more growth than the low-level. 4) At the early growing stage P-32 treatment produced in general significantly more lower than control. At the later stage, however, this difference was not clearly seen. 5) The P-32 treatment seemed to have stimulated earlier florescence and this tendency was more clearly observable eapecially at the high activity level. 6) The weight of the air-dried seeds tended to be increased through P-32 treatment by 10-45%. This tendency was clearly observed especially at the low-level activity. 7) As for the contents of the various macroelements in the leaves, the nitrogen showed significantly larger contents at the middle level(S1) P-32 treatments. The phosphorous contents showed also highest at the middle levels activity and lower both at the high and low-activity levels. The potassium contents was proved, on the contrary, higher at the low-level activity and lower at the high-level. 8) The nitrogen contents in the stems was found significantly higher than control, except at the low-activity level. The phosphorous showed higher contents at the low-activity level and no significant difference at the high-activity level. As for the contents of potassium, calcium and magnesium, three seemed no significant difference among treatments. However, the magnesium showed somewhat higher content at the low-activity level, whereas the calcium was proved high than control. 9) The inorganic contents in the root showed that N and P in the P-32 treated plant were significantly higher than the control and the K-contents was, on the contrary, significantly higher at the control than the rest of the treatments. As for the calcium and magnesium there showed no difference among all treatments.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.14 no.1
• /
• pp.120-127
• /
• 2007

Purpose: This study was done to identify the level of stress, hardiness, and professional burnout of intensive care unit (ICU) nurses and to provide basic data for the qualitative improvement of nursing work achievement in the workplace. Method: The data were obtained from 129 ICU nurses through a questionnaire. Results: Stress showed positive correlation with the level of professional burnout and there was negative correlation between hardiness and professional burnout. Nurses in the group with a high level of stress, and a high level of hardiness reported a low level of professional burnout compared to those in the group with a lower level of hardiness (t=-2.60, p= .012). Nurses in the group with a low level of hardiness and a low level of stress showed a lower level of professional burnout than those with a high level of stress (t=3.51, p= .001). Conclusion: The results show that the high level of stress when coupled with a low level of hardiness of ICU nurses results in a high level of professional burnout. For this reason, it is important for nursing administration to support nurses to reduce levels of stress and the resulting burnout in ICU nurses.