• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.317-323
• /
• 2017

In this study, the heating performance and the energy saving effect of the heat pump system using hot waste water(waste heat) of the thermal power plant discharged from a thermal power plant to the sea were analyzed. The greenhouse area was $5,280m^2$ and scale of the heat pump system was 120 RT(Refrigeration Ton), which was divided into 30 RT, 40 RT and 50 RT. The heat pump system consisted of the roll type heat exchangers, hot waste water transfer pipes, heat pumps(30, 40, 50 RT), a heat storage tank and fan coil units. The roll type heat exchangers was made of PE(Poly Ethylene) pipes in consideration of low cost and durability against corrosion, because hot waste water(sea water) is highly corrosive. And the heating period was 5 months from October to February. During the heating performance test(12 hours), the inlet water temperature of evaporator was changed from $32^{\circ}C$ to $26^{\circ}C$, and heat absorption of he evaporator was changed from 175 kW to 120 kW. The inlet water temperature of the condenser rose linearly from $15^{\circ}C$ to $50^{\circ}C$, and the heat release of condenser was reduced by 40 kW from 200 kW to 160 kW. And the power consumption of the heat pump system increased from 30 kW to 42 kW. When the inlet water temperature of condenser was $15^{\circ}C$, the heating COP(Coefficient Of Performance) was over 7.0. When it was $30^{\circ}C$, it dropped to 5.0, and when it was above $40^{\circ}C$, it decreased to less than 4.0. It was analyzed that the reduction of heating energy cost was 87% when compared to the duty free diesel that the carbon dioxide emission reduction effect was 62% by recycling the waste heat of the thermal power plant as a heat source of the heat pump system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.3
• /
• pp.508-512
• /
• 1998

The NTC thermistors were sintered by using microwave hybrid heating method at $1100^{\circ}C$~$1300^{\circ}C$ and those electrical properties were investigated. The obtained $B_{25^{\circ}C/85^{\circ}C}$ values from temperature dependence of electrical resisitivity were around 3100~3200 K which were almost the same values as conventionally sintered ones. Compared with conventional sintering process, this process could complete whole sintering process within 20 minutes. This the processing time and energy consumption could be reduced through this rapid heating by using microwave hybrid heating.t there were showed only two peaks, glycolide melting peak and lower molecular weight melting peak without lauryl alcohol. Conversion increased slowly with the reaction time up to 50 minutes, and then gave a sudden increase above that. The reaction time to disappear in glycolide melting peak during polymerization was shortened with the increase of lauryl alcohol content. Zero-shear viscosity of polyglycolic acid decreased with the increase of free acid content in glycolide.ssional energy and bending hysteresis increased. \circled3 Surface characteristics such as friction coefficient and thickness variation of highly shrinkage fabrics became relatively roughened state. \circled4 Since stiffened and roughened characteristics of highly shrinkage fabrics, drapabilities of them were significantly lowered. Additionally thermal insulation property of high shrinkage fabric was higher than that of low shrinkage fabric due to bulky and thickened feature. From the results, it is considered that the silk fabrics with high filling shrinkage have the good bulkiness and heat keeping properties and thus they have the suitable characteristics for high quality men's and women's formal garments.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.6 no.2
• /
• pp.7-30
• /
• 1998

Generation and recycling potential of organic waste in Korea were estimated. Status of organic waste composting and compost utilization also were surveyed to promote the recycling of organic waste. From 1994 to 1997, generation of garbage decreased gradually while recycling rate increased due to positive governmental strategy. During the same period, livestock waste increased 11.2%. Municipal wastewater sludge was generated 3,500 ton/day which was 0.03% of wastewater treated in 1996. The energy Potential of industrial organic waste was estimated to 288 million TOE which was 1.75% of the nationwide first energy consumption in 1996. Recycling of industrial sludge was low to 31%, while recycling of animal waste, plant scraps, and wasted paper were relatively high over 50%. Industrial sludge should be recycled more as it was the most part of industrial organic waste. Conventional composting materials were mainly livestock waste, food processing waste, fishery waste, sawdust, and nightsoil. Garbage and sludge have been composted recently. 420,000 tons of compost in 1996 were produced by 288 makers, the most of which were utilized in agriculture. It was suggested that separated collection, compost standard, and quality management should be provided to promote the composting of organic waste.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.282-287
• /
• 2016

Recently in order to protect the ocean environment and to reduce energy consumption, shipbuilders have been developing highly economized ships. This research analyzed the possibility of adopting the onshore absorption refrigerator to offshore ships having a cooling system with refrigerant by using the waiste heat of the engine jacket cooling water instead of compression refrigerators. The results showed that R236fa could be a suitable medium for absorbing the heat of the absorber and condenser in an absorption refrigerator. The cooling system using R236fa achieved a high COP of 0.798, which is 15% and 5% higher than an air cooling system with a cooling tower and a water cooling system with a heat exchanger, respectively. The cooling system with R236fa achieved high efficiency with a 25% reduction in flow rate of LiBr solution and only 15.7% flow rate of cooling medium as compared to the water cooling system. The heating of sea water by the engine jacket water flowing out from the generator can prevent the crystallization of LiBr solution due to the low temperature of sea water.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1285-1292
• /
• 2011

The characteristics of a semiconductor chiller system with EEV have been experimentally studied. Three experiments on temperature changes (increase and decrease), load variation, and control precision were conducted to investigate the operating characteristics of the semiconductor chiller. The power consumption was 8.9 kW during increase in temperature. The required time was 37.5 min for CH1 and 39.5 min for CH2. Moreover, the time required for falling temperature was 26.5 min. The control precision for partial load operation was relatively low compared to that of a full load operation. In addition, the CH2 equipped with a step motor showed better control precision. The power consumed by the chiller for process cooling water was 1.8 kW, which was one-half of that consumed during the refrigeration cycle. The objective of this study is to provide an optimal control guideline for the semiconductor chiller design.

• Journal of the Korean Institute of Rural Architecture
• /
• v.16 no.1
• /
• pp.35-42
• /
• 2014

Due to the development of civilization, the humans is privileged the rich of technologies for housing thermal environment. But, this kind of technological development caused enough trouble of energy excessive consumption. For solve this problem, many researchers strive to exploit the low energy sustainable techniques. For such a reason, the eco-friendly techniques of vernacular house are resurfacing. These traditional techniques are applied to a development of eco-friendly modern housing. They are no longer recognized as outdated products. On this context, this study proposes an scientific analysis on the thermal environment characteristics of Neolithic thatched-roof dugout hut(Um house). So far the several studies have been carried out in viewpoint of the history and structural compositions of the Um house which has been used as the normal housing for about 1000 years in the Neolithic era, however the thermal characteristics analysis of the Um house has never been studied. Um house is not a housing which has been composed by the scientific analysis or architectural design technology, but evolved empirically over a long period. This study on the thermal environment characteristics of Um house would provide basic information for the development of korean eco-friendly rural housing by korean climate characteristics. In this study, the thermal environmental characteristics of the Um house in the Neolithic era was analysed experimentally. The results of this study could be summarized as follows: 1. When the solar insolation and the ambient temperature in the daytime were $420W/m^2$ and $17^{\circ}C$ respectively, the surface temperature of the Um house roof covered with the rice straw was $37^{\circ}C$ and that in the roof $32^{\circ}C$, and in the conditions above the air temperature in the room was $15^{\circ}C$. 2. When the ambient relative humidity was 40%, that in the room of the Um house 50%, and at the ambient relative humidity of 90~100%, that in the room was 60%. 3. Through the experimental analysis, it was verified that the enthalpy and relative humidity is in an inverse relationship. 4. In general the comfort degree in the living space is changed with the seasonal climate, also in this study, the comfort degree in the room of the Um house in October and November was higher than that in May and June.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.663-674
• /
• 2005

We propose a system aimed at achieving high energy-delay efficiency by using adaptive victim caches. Particularly, we investigate methods to improve the hit rates in the first level of memory hierarchy, which reduces the number of accesses to mort power consuming memory structures such as L2 cache. Victim cache is a memory element for reducing conflict misses in a direct-mapped L1 cache. We present two techniques to fill the victim cache with the blocks that have higher probability to be re-reqeusted by processor. Hit-based victim cache ks tilled with the blocks which were referenced frequently by processor. Replacement-based victim cache is filled with the blocks which were evicted from the sets where block replacements had happened frequently According to our simulations, replacement-based victim cache scheme outperforms the conventional victim cache scheme about $2\%$ on average and refutes the power consumption by up to $8\%$.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.62-71
• /
• 2011

Highly enriched oxygen is used in energy-efficient combustion due to decreased non-flammable nitrogen, while high purity nitrogen is used for explosion proof in the LNG ships and keeping the freshness of green stuffs. Membrane technology can be used in these $O_2$ and $N_2$ generation with low energy consumption. In this study, PES was used as a membrane material and 1-methyl-2-pyrollidone (NMP) and acetone were employed as a good solvent and nonsolvent addictive (swelling agent to PES), respectively. Dope solutions were prepared by changing the content of acetone (0, 6.5, 15, 25, 31.5 wt%) in 37 wt% PES solutions. Hollow fiber spinning was performed at 0~10 cm of air-gap distances for each dope solution. $O_2/N_2$ selectivity and permeability were investigated by comparing of hollow fibers coated or not by silicons. $O_2/N_2$ selectivity increased and permeance of $O_2$ and $N_2$ decreased with increasing air-gap height independently of acetone addictions. Optimized PES hollow fibers were obtained with 37/6.5/56.5 wt% PES/acetone/NMP dope solution and 10 cm air-gap, which showed 7.3 of $O_2/N_2$ selectivity and 4.3 GPU of $O_2$ permeability after silicon coating.

• Korean Journal of Community Nutrition
• /
• v.13 no.4
• /
• pp.476-488
• /
• 2008

This study investigates the relationship of smoking on daily intake of nutrients and snacks in the Chungnam and Daejeon high school students. Up to date scientific nutrition education and counseling programs in the regular school system is needed for a professional nutrition education teacher. The primary objective of this study was to provide useful information to nutrition education teachers. A survey was conducted with 400 high school students in the Chungnam and Daejeon areas. 381 out of 400 questionnaires were analyzed with SPSS 12.0K. The subjects were composed of 49.8% male, 50.1% female and 40.9% regular high school students, 59.1% business high school students and smokers 43.1%, non-smokers 56.9%. 43.4% of smokers had been smoking since middle school. On analysis of daily nutrient intakes, 16 out of 19 nutrients except animal calcium, Vitamin A and Vitamin C were much more consumed by the smoking group than the non-smoking group non-significantly. Especially vegetable fat and Vitamin E were higher in the smoking group than the non-smoking group (p<0.05). The intake ratio of carbohydrates: protein: fat was similar in the two groups (smoking group 55:15:29, nonsmoking group 56:15:28). Intakes of Vitamin B1 and potassium in comparison with the Korean dietary reference intakes(KDRI) were under 50% in both groups. However, sodium was taken over 200% compared to KDRI in both groups. Intakes of Vitamin C in the smoking group were as low as 76.5% in comparison to KDRI. Smokers need to increase the intakes of Vitamin C considering that smokers need to intake Vitamin C two times than non-smokers. Nutrient intakes from snacks in the smoking group were higher than the non-smoking group. Nutrients that originated from snacks which took over 20% among daily nutrient intakes were 12 nutrients(energy, fat, carbohydrate, calcium, P, Fe, K, Vitamin $B_1$, Vitamin $B_2$, Vitamin C, Vitamin E, dietary fiber) in the smoking group compared to 7 nutrients(energy, vegetable protein, fat, carbohydrate, calcium, Vitamin $B_2$, Vitamin C) in the non-smoking group. The smoking group was significantly paying more money for snacks each month than the non-smoking group was(p<0.01). Periods of consumption were irregular in the smoking group(p<0.05) and the smoking group was used to taking snacks in the morning compared to the non-smoking group. The smoking group preferred sweets and high calorie food over other snacks in comparison of the non-smoking group. The nonsmoking group had better eating habits than the smoking group.

• Korean Journal of Community Nutrition
• /
• v.13 no.2
• /
• pp.207-215
• /
• 2008

This study was conducted to measure and evaluate the food and nutrient intakes of the people living near the nuclear plant and to investigate the relationship between the household income level and the food and nutrient intake patterns. A total of 552 cases (263 males and 289 females) were surveyed during the period from April 1 to December 21 of 2005. Dietary intake was measured by means of the 24-hour recall method. The data were analyzed using SPSS Windows (ver. 14.0). The household income level of the subjects was classified into two groups : Low income group (LIG; $\leq$2,000,000 won) and high income group (HIG; > 2,000,000). The subjects at large had less energy and nutrient intakes than did the population in town and village who participated in the 2005 National Health and Nutrition Survey. The intake of calcium, zinc, vitamin A, riboflavin, vitamin $B_6$, vitamin C, and folic acid was less than the Estimated Average Requirement in case of $50{\sim}95%$ of the subjects. The LIG consumed less beans, vegetables, fruits, meats, and beverages than did the HIG in male, while the LIG consumed less eggs and beverages than did the HIG in female. The LIG consumed less nutrients than did the HIG in male, except for carbohydrate, while the LIG consumed less nutrients including zinc, vitamin A, riboflavin, vitamin B6, vitamin C, folic acid than did the HIG in female. In addition, the LIG had higher percentage energy consumption from carbohydrate. These results suggest that higher food and nutrient intake is associated with higher income.