• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.3
• /
• pp.1-9
• /
• 1999

This paper described the results of the characteristics of the near-bottom flow and field analysis of the tidal flats sediment. It was the aim of this paper to grasp current flow of tidal flat's environment and influence factor for environmental change forecast of tidal flats. Field measurement of water velocity, water elevation, bed materials test, and temperature distribution of tidal flat were conducted. Thereafter, current flow, turbidity and temperature distribution of tidal flat sediment have been discussed. The field research results showed that the fluctuating velocity near the seabed before and after its appearance at low tide was strongly affected by the wind wave. The resuspension of the sea-bottom sediment took place with great intensity before and after the appearance of the seabed at low tide. Both the sea water level and the weather condition were a significant influential factors. Such as, temperature and turbidity just on the surface and the shallow layer of seabed sediments were varied largely with time and weather conditions, but that its deeper layers was almost constant. Temperature on the seabed sediments was strongly influenced by irradiance and water depth. The temperature variation of the tidal flat and the variation characteristics of the current flow and turbidity depend greatly on the inhabiting environment of the tidal flat benthic organism.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.9
• /
• pp.124-128
• /
• 2010

In this paper, the shielding effectiveness of aluminum shielded room with using eddy-current is calculated and measured after fabricated. The size and thickness of shielded room are decided as $2.4{\times}2.4{\times}2.4[m^3]$ and 12[mm] after AC shielding characteristics by eddy-current of conductive materials is analyzed. To verify the shielding effectiveness, a rectangular helmholtz coil is fabricated to generate magnetic field of 1.37[${\mu}T$] and measured magnetic field inside shielding room for 0.01~10[Hz]. According to calculations and measurements, AC Shielding effectiveness by eddy-current in aluminum is very small for 0.01~2[Hz] and 5 times to 11 times for 5~10[Hz].

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.6
• /
• pp.1628-1645
• /
• 2015

This study was designed to analyze the present condition of the lifelong education field training program and to implement the need assessment of field training program based on the job model application. In order to achieve these goals, surveys were conducted through questionnaires and in-depth interviews targeting staffs of lifelong education institution in Busan area. The 115 subjects were analyzed by frequency distribution, the paired samples t-test, and the Borich's need analysis. The result showed that the field training program was poorly executed during the year of 2013 due to deficiency of certified practitioners and systematic guidelines. Also, the most highly demanded tasks were promoting change, networking, planning, developing programs and conducting surveys among various roles of lifelong educators. On the other hand, the need for the assisting and supporting programs were relatively low. Finally, this study concluded the need for developing systematic guidelines and for accrediting as a lifelong education field training institution nationwide. The results of this study would ultimately contribute to enhance the quality of lifelong education field training program.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.5
• /
• pp.95-104
• /
• 2018

The purpose of this study was to explore the extent of difficulties experienced by facilitators in the rural field forum and to derive a theoretical model for improving the satisfaction of facilitators in the rural field forum. Based on grounded theory, qualitative analysis used data collected through individual in-depth interviews with 10 facilitators who are working at the rural field forum. This collected data was analyzed using the Nvivo 11 program. Using a derived theoretical model, the result of analyzing the difficulties experienced by facilitators in the rural field forum showed the core phenomenon identified as difficulties on-site the forum. There was a clarification of the issues regarding improvement of their labour conditions in order to solve the difficulties on-site the forum. The issues towards improving labour conditions were low allowance, equal assignment, guaranteed four major insurances and so on. The facilitators have been trying to activate the rural field forum by promoting their own capacity through the cooperation between colleagues, post training, seminars, and conferences.

• Geophysics and Geophysical Exploration
• /
• v.6 no.4
• /
• pp.207-214
• /
• 2003

To analyze soil properties with depth in rice field, we compared resistivity distributions obtained from soil analysis with one dimensional inversion of small loop electromagnetic (EM) data. Although it didn't show consistency exactly between the two resistivity distributions, low resistivity zones in soil analysis, appeared to agree with low resistivity zones in EM result. Therefore, small loop EM method can be applied to obtain rapidly the soil properties such as salt accumulation in a rice field. If research on soil property and EM responses of unsaturated zone would be conducted consistently, small loop EM method can be used effectively to detect salt accumulated zone in agricultural area.

• Ocean Science Journal
• /
• v.42 no.3
• /
• pp.165-170
• /
• 2007

The structure of the nematodes communities has been studied in the sediments on two sites located outside and under the layer of Ahnfeltia tobuchiensis (Kanno and Matsubara 1932; Makijenko 1970). Bottom sediments at the stations were represented by sands with a different degree of silting. Specific structure of nematodes at the stations was significantly different under the similar environmental conditions (water depth, dissolved oxygen saturation, salinity, temperature of the bottom layer and organic carbon content inside of the sediment). Nematodes dominated (75.7 %) in meiobenthos community under the layer of A. tobuchiensis where concentration of silt particles was 12 %. Representatives of the family Comesomatidae were dominant. Low index of species diversity and high Simpson domination index were detected in this community. Under a layer of A. tobuchiensis with the thickness of 30 cm concentration of the silt particles was 5.39 %; nematodes density was low and made 32.1 % of the general density of meiobenthos. Species of the families Xyalidae and Monoposthiidae were dominant. Outside of A. tobuchiensis, field percentage of silt particles was minimal (3.1 %) and representatives of families Cyatholaimidae and Axonolaimidae dominated. The specific structure of nematodes in this type of the ground is characterized by high index of species diversity and low level of domination.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.40.3-41
• /
• 2021

Minor mergers leave behind long lived, but extremely faint and extended tidal features including tails, streams, loops and plumes. These act as a fossil record for the host galaxy's past interactions, allowing us to infer recent accretion histories and place constraints on the properties and nature of a galaxy's dark matter halo. However, shallow imaging or small homogeneous samples of past surveys have resulted in weak observational constraints on the role of galaxy mergers and interactions in galaxy assembly. The Rubin Observatory, which is optimised to deliver fast, wide field-of-view imaging, will enable deep and unbiased observations over the 18,000 square degrees of the Legacy Survey of Space and Time (LSST), resulting in samples of potentially of millions of objects undergoing tidal interactions. Using realistic mock images produced with state-of-the-art cosmological simulations we perform a comprehensive theoretical investigation of the extended diffuse light around galaxies and galaxy groups down to low stellar mass densities. We consider the nature, frequency and visibility of tidal features and debris across a range of environments and stellar masses as well as their reliability as an indicator of galaxy accretion histories. We consider how observational biases such as projection effects, the point-spread-function and survey depth may effect the proper characterisation and measurement of tidal features, finding that LSST will be capable of recovering much of the flux found in the outskirts of L* galaxies at redshifts beyond local volume. In our simulated sample, tidal features are ubiquitous In L* galaxies and remain common even at significantly lower masses (M*>10^10 Msun). The fraction of stellar mass found in tidal features increases towards higher masses, rising to 5-10% for the most massive objects in our sample (M*~10^11.5 Msun). Such objects frequently exhibit many distinct tidal features often with complex morphologies, becoming increasingly numerous with increased depth. The interpretation and characterisation of such features can vary significantly with orientation and imaging depth. Our findings demonstrate the importance of accounting for the biases that arise from projection effects and surface-brightness limits and suggest that, even after the LSST is complete, much of the discovery space in low surface-brightness Universe will remain to be explored.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1972-1975
• /
• 2002

In this paper, we have proposed low temperature co-fired ceramic (LTCC) based packaging for RF MEMS devices. The packaging structure is designed and evaluated with 3D full field simulation. 50 ${\Omega}$ matched coplanar waveguide(CPW) transmission line is employed as the test vehicle to evaluate the performances of the proposed package structure. The line is encapsulated with the LTCC packaging lid and connected to the via feed line. To reduce the insertion loss due to the packaging lid, the cavity with via post is formed in the packaging lid. The performances of the package structure is simulated with the different cavity depth and via-to-via length. Simulation results show that the proposed package structure has reflection loss better than 20 dB and insertion loss lower than 0.1 dB from DC to 30 GHz with the cavity depth and via-to-via length of 300 ${\mu}m$ and 350 ${\mu}m$, respectively. To realize the designed package structure, the cavity patterning is tested using the sandblast of LTCC.

• Korean Institute of Interior Design Journal
• /
• no.2
• /
• pp.29-39
• /
• 1994

The purpose of this study was to design rural kitchen furnitures. Thirty seven rural houses were selected for this study. Present and past uses of space for cooling and dining were investigated by a field survey method. The Major findings were that ; 1) Sink, mixing, and range centers should be installed in rural kitchen 2) The depth of working center, 550-600mm was recommended. And working space cold be added by 150mm in depth and 100mm in height. The height of working center, 820mm-850mm was recommended . The minimum width of sink was 900 mm and the optimum one was 1200mm. The optimum width of mixing center and cooking center were 600m respectively 3) In the low ceiling of kitchen or the wooden structure of kitchen, a wall cabinet without upper cupboard was recommended. On the basis of the results, four types of rural kitchen furnitures is proposed.

• Journal of Integrative Natural Science
• /
• v.7 no.1
• /
• pp.1-4
• /
• 2014

Distributed Bragg reflector porous silicon of different characteristics were formed to determine their optical constants in the visible wavelength range using a periodic square wave current between low and high current densities. The surface and cross-sectional SEM images of distributed Bragg reflector porous silicon were obtained using a cold field emission scanning electron microscope. The surface image of distributed Bragg reflector porous silicon indicates that the distributions of pores are even. The cross-sectional image illustrates that the multilayer of distributed Bragg reflector porous silicon exhibits a depth of few microns and applying of square current density during the etching process results two distinct refractive indices in the contrast. Distributed Bragg reflector porous silicon exhibited a porosity depth profile that related directly to the current-time profile used in etch. Its free-standing film was obtained by applying an electro-polishing current.